Yamobur based on MTZ - technical characteristics

The MTZ-80 (82) tractor is a universal machine that can be combined with a wide range of mounted drilling equipment and is widely used in construction, utilities and other industries. Several models of MTZ-based hole drills have been developed and are successfully operating, among which you can select equipment for any task. Each drilling rig has its own design features. Some models are suitable for use on any soil, others have restrictions on operating conditions.

Models of pit drills based on MTZ

Several modifications of drilling equipment have been implemented on the basic basis of a wheeled tractor:

hole drills - drilling devices for developing relatively shallow holes (up to 3 m) using the “dry” method (without cleaning) using a simple, extendable or telescopic drill;
drilling and crane rigs - used to create wells with a depth of 6-20 meters; the presence of a lifting mechanism allows you to work with large loads.

The equipment is used to drill holes of a wide range of diameters and depths for various purposes:

Drilling and crane machine at work

installation of poles, power lines;
laying foundations and piles;
tree planting;
installation of wells;
geodetic studies of soil;
detection of shallow water layers.

Drilling machines based on MTZ are equipped with auxiliary attachments necessary for the comprehensive implementation of assigned tasks (brushes, dumps, winches), which makes it possible to do without the use of additional equipment.

The wheeled base ensures high maneuverability and mobility of drilling rigs. The car is capable of reaching speeds of up to 40 km/h. Compact dimensions make it possible to carry out drilling operations in hard-to-reach and limited-area areas, when using a full-size rig is impossible or unprofitable.

Price

You can buy a hole drill for an MTZ tractor at a price ranging from 60 to 125 thousand rubles. The cost depends on the configuration and purpose: equipment for hard soils is more expensive. Used equipment can be purchased for 20–25 thousand rubles. The cost of a homemade drill will be even lower, especially when using old materials that cannot be used in construction or other work.

The price of drilling machines based on MTZ ranges from 500 thousand rubles. for used copies up to 1 million rubles and more for new ones. The amount depends on the availability of additional equipment and the characteristics of the drill.

Drilling and crane rig 205-D

Universal equipment used to perform a wide range of tasks in construction, landscaping and public utilities, thanks to the presence of a lifting mechanism and a blade for removing snow masses. Main operating parameters:

dimensions in folded/working condition (length/width/height) – 6.8*2.5*3.95/6.8*2.5*7.6 m;
total weight of the installation including the base – 6,450 kg;
maximum drilling depth – 3 meters;
hole diameters – 36, 50, 63, 80 cm;
Possible operating angles are 60 - 105 degrees.

Drilling and crane rig 205-D

Machine Yamobur BM-205-V

A universal hole drill based on the MTZ tractor is used for drilling work both on non-frozen soils and in permafrost conditions. The unit is complemented by a front-end loader to perform related loading and unloading operations, cleaning the site and backfilling trenches.

The equipment is highly productive and is actively used where it is necessary to perform a large volume of drilling work in a short period of time.

Yamobur BM-205-V

Features and main parameters:

overall dimensions in transport/working position (length/width/height) – 7.4*2.1*3.99/7.4*2.1*7.5 m;
weight with base – 6,500 kg;
cyclic drilling method;
type of rotary drive – mechanical;
plane inclination angle – 60-102 degrees;
maximum drilling depth – 2-3 meters;
drilling speed – 15 m/h;
torque – 4900 N/m.

The advantage of purchasing drilling tractors

The Altai Tractor Plant has a wide fleet of drilling crawler tractors for use in various areas of activity. Modern technology has high productivity; high-quality materials and high-tech equipment are used in their production. Experienced plant employees produce high-quality assembly of machinery and equipment.

You can buy the plant's products at a competitive price with convenient payment and delivery terms. If you have any questions, please contact our consultants on the official website or by phone number.

Drilling equipment E-01-06

Designed for drilling only in soft soil, not suitable for working on frozen soil or layers similar in hardness. The E-01-06 drilling machine exists in several modifications, differing only in the diameter of the drill. Light weight and simple fastening design allow for quick installation and dismantling of equipment. Main technical parameters:

Drilling machine E-01-06

hole diameter depending on the model - 20, 25, 30, 35, 40 cm;
drilling rig weight – 235 kg;
maximum drilling depth – 1.5 meters (when using an extension – 2.5 meters);
torque – 1300 N/m;
rotation speed of the equipment – 80 rpm;
weight – 235 kg.

Is it possible to make an electric model yourself?

The electric variation differs from the standard drill in that it is supplemented with an electric motor. Because of it, the process of digging wells is faster and requires less effort. And for mechanisms designed to excavate soil more than 3 m, an electric drive is necessary. The improved unit can be connected to the network (if it is used near houses), and it can also be started using an engine running on gasoline or gas.

To make your own electric drill, you will need to take a drill and an auger. Experts recommend purchasing a tool from a foreign company; the power of such a device reaches 2 kW. However, we must not forget that the drill has a third cone, so you will need a lathe for the job. With its help it is easy to make special recesses on both sides. A drill with a cone is attached to the adapter and the pointed part is cut off.

Due to the heavy weight of the structure, to use it you need to install a mounted electric winch capable of raising and lowering the drill.

Special equipment Yamobur BKM-2MT

One of the specialized drilling rigs based on MTZ, designed to develop water wells when the water layer occurs at a depth of up to 20 m. It is also used to develop holes for power line supports, communication poles, columnar foundations in soils of categories 1-4. Main characteristics:

overall dimensions in transport/working position (length/width/height) – 5.8*2.5*3.9/5.3*3.6*7.25 m;
maximum drilling depth – 6 m;
hole diameters – 36, 42, 50, 60 cm;
operating angle – 60 – 105 degrees;
type of drilling – rotary;
expandable auger drill.

Yamobur BKM-2MT

Installation BUER 1030

A pit drill based on MTZ is most often used for servicing electrical networks, installing screw piles, and during loading and unloading operations. Can be used on rocky and hard soils. Equipped with support jacks to ensure stability on inclined surfaces.

Technical specifications:

working body – auger expandable drill;
dimensions (length/width/height) – 5.54*2.22*3.58 m;
hole diameters – 36 – 60 cm;
maximum depth – 8 meters.

Yamobur BUER 1030

Drilling rigs based on the MTZ tractor can be equipped with additional special equipment, which can be attached and dismantled in a few minutes:

DRU-01 - a fastening device designed to facilitate work with rotten wooden supports - the device reliably fixes the post in one position, thereby ensuring the safety of work at heights;
DPO-01 – a device in the form of a hydraulic cylinder for quick and easy removal of supports from the ground; The installation allows you to significantly increase the speed and productivity of labor.

DRU-01

Hydraulic system of MTZ tractor

The MTZ tractor is equipped with a reliable hydraulic system that controls drilling attachments. Hydraulics has the following main parameters:

Diagram of the hydraulic system of MTZ tractors

number of cylinders – 3;
cylinder type – double acting;
pump type – gear;
pressure in the system is 16 MPa.

MTZ-based hole drills are distinguished by their simple design and compact overall dimensions, reliability, ease of maintenance and high productivity. In addition to the main function, drilling rigs perform additional types of work - one unit of equipment replaces a whole range of related equipment. Availability of spare parts increases the degree of repairability.

Classification of drilling tractors

All self-propelled drilling tractors on a crawler chassis can be divided into:

rotating and non-rotating;
according to the operating principle;
by location method (side, rear or on a turntable)
by drive type (diesel, gasoline, electric, electrohydraulic)
in terms of size (as a rule, drilling and crane equipment on a crawler chassis is small in size for easy transportation).

You can also classify drilling rigs used on tracked chassis according to the drilling method:

rotational (the rotational head of the installation is fed with force along the axis);
auger (the mechanism is made in the form of a pipe with a wrapped tape, there is no need to flush the well during operation);
impact (work occurs due to the impact movements of the drill bit);
roller cutter (the drill bit is presented in the form of steel cutter bits, the destruction of rocks occurs by rotational motion with strong pressure);
impact-rotational (work occurs in the process of continuous rotation of the bar and its impacts).

The use of one or another installation is determined by the types of rocks where it is necessary to carry out work, as a rule, these are soils from categories I to VI.