The New Holland manufacturer has proven itself well in the specialty equipment markets, since all products have high reliability, performance and convenience, both during operation and maintenance. It would seem that this manufacturer specializes in large-sized equipment, however, the line also includes quite compact machines designed for operation on sites with a small working space. One such machine is the New Holland L218 mini loader. This model boasts its high technical characteristics and versatility, which allows it to confidently compete with more “serious” equipment.
The design of this mini loader is very well balanced, which avoids the machine tipping over when working with a fairly large load.
An in-line four-cylinder N844LT engine is installed. The engine consumes diesel fuel and it is worth noting that it is not fussy about quality. The rated output power reaches 45 kilowatts or 60 horsepower, which is a fairly high figure given the small weight of the loader.
In the Russian markets of various special equipment, the New Holland L218 mini-loader is very popular due to its long service life, versatility, simple maintenance and, of course, due to the availability of spare parts, both in terms of cost and search.
Purpose
The New Holland 218 mini-loader is a multifunctional machine, thanks to which it quickly became popular in such areas as construction of any objects, agriculture, utilities, various industries, warehouses, forestry and much more.
The high productivity of the equipment allows you to perform various loading and unloading operations; moving bulk and lump materials over short distances; leveling work sites; clear snow from street areas and areas of various enterprises; drilling work; destruction of any small concrete objects; filling holes and other depressions and irregularities; creation of embankments of soil, sand, crushed stone and other bulk materials; road repair work; uprooting small stumps.
Attachments
The versatility of the machine is explained, of course, by a large range of various attachments, which can significantly facilitate any work process. Currently, absolutely all special equipment, both construction and agricultural, has its own suitable range of additional units. Also for the New Holland L218 mini loader. This machine can be operated with the following additional equipment:
- Mounted concrete mixer. This equipment is intended for the preparation of building mixtures.
- Road milling equipment. Designed for loosening hard soil masses and destroying asphalt and concrete road surfaces. It is used in construction and road repair work.
- Basic front bucket. The length of this unit is 1200 millimeters. The width is 1750 millimeters. The structural height is 820 millimeters. The bucket has a capacity of 470 cubic millimeters. The mass of the unit is 160 kilograms.
- Frontal bucket designed for work in quarry conditions. Its length is 1200 millimeters. The width is also 1750 millimeters. The height is 820 millimeters. The total capacity is 485 cubic centimeters. It differs from the previous unit in increased strength and resistance to various influences. The weight of this weapon reaches 170 kilograms.
- Front blade with the ability to change its angle of rotation. The maximum rotation is an angle of plus/minus 35 degrees. In its original position, such a blade has a width of 2100 millimeters. The structural length is 1100 millimeters. It is equal in height to the previous buckets, namely its height does not exceed 820 millimeters. The weight of this equipment is 240 kilograms.
- Front pallet forks. Such equipment is intended for loading, unloading and moving short distances of pallet cargo or construction materials suspended from forks by means of a cable. The maximum carrying capacity of such a weapon is no more than 870 kilograms. There are no specific fork widths, since the width is selected depending on the type of load and type of work. It is worth noting that in addition to loading and unloading operations, you can also hold the load at the required height, thereby replacing the crane boom. The fully assembled weight is 140 kilograms.
- Hydraulic breaker. The equipment is designed to carry out dismantling work of any small concrete objects. In addition, it is often used in the field of road repair work to open up the asphalt layer of road sections. The structural length of such equipment is 600 millimeters. The width is 1240 millimeters. The total height is 1050 millimeters. The lowest number of beats is 450 beats per minute. The highest number of beats is 950 beats per minute. The total weight of the hydraulic breaker is 260 kilograms.
- Mounted drilling equipment. The main purpose of the drilling unit is to drill various holes for fences, poles and planting any plants in parks. The equipment can use three augers with diameters of 180 millimeters, 270 millimeters and 390 millimeters. The maximum depth of the augers is no more than 2100 millimeters. The structural width of this equipment is 800 millimeters. The length of the unit is 2300 millimeters. The height is 700 millimeters. The attachment of the drilling unit weighs 120 kilograms, when the total weight is 160 kilograms.
- Municipal attachments. The installed brush has a length of 1900 millimeters. The same value is also characteristic of the working width in the initial position. The maximum rotation has an angle of plus/minus 30 degrees, then the area captured by the brush is 1600 millimeters. The optimal speed for completely sweeping surfaces is 7-8 kilometers per hour. The design is complemented by a 200 liter water tank. The width of the entire equipment structure is 2300 millimeters. The length of this unit is 1100 millimeters. The height is 1200 millimeters. The weight of this equipment is 620 kilograms.
- Mounted cleaning unit. This equipment is intended for cleaning parking lots, street areas, areas of various enterprises and road sections. A sweeping brush with a length of 2100 millimeters is installed. This unit, unlike the previous one, is not capable of changing its angle of rotation. The structural width is 2400 millimeters. The length is 2100 millimeters. The height is 1200 millimeters. The mass of such equipment is 630 kilograms.
Operator's cabin
The New Holland L218 has a wide viewing angle from the operator's cab. The side windows of the new design are increased in width and offer a greater viewing angle. This ensures work safety and operator convenience. Panoramic visibility ensures ease of maneuvering.
The large internal space is organized ergonomically; the controls allow you to comfortably manipulate all functions of the equipment. The standard equipment includes heating and ventilation systems that maintain a comfortable microclimate in cold weather. Joystick controls do not take up much space in the cabin, and the buttons on them guarantee fast and precise control. There is ample legroom for the driver, a seat with suspension and a heating system, and a control system with joysticks and pedals.
Optionally, the loader can be equipped with an air conditioning system. Together with other microclimate creation systems, it guarantees comfortable working conditions, reduces driver fatigue, and increases his attentiveness and efficiency.
Return to navigation
Specifications
Dimensional data:
- Construction length – 3585 millimeters.
- The width of the wheels is 1678 millimeters.
- The height of the cabin is 1974 millimeters.
- Ground clearance – 178 millimeters.
- Wheelbase (longitudinal) – 1128 millimeters.
- The track width of the front wheels is 1370 millimeters.
- The track width of the rear wheels is 1370 millimeters.
- The maximum height of the bucket suspension point is 3048 millimeters.
- The reach of the edge of the working unit (front bucket) is 783 millimeters.
Operational values:
- The structural weight of the mini loader is 2660 kilograms.
- Tipping load – 1630 kilograms.
- The maximum unloading height of the front bucket is 2377 millimeters.
- The maximum lifting height of the bucket is 2370 millimeters.
- The maximum tilt angle of the bucket is 52 degrees.
- The bucket breakout force is 24.2 kilonewtons.
- The capacity of the basic front bucket is 470 cubic millimeters.
- The maximum speed of the vehicle is 18.5 kilometers per hour.
- Wheel formula – 4×4.
Engine:
- The type of engine installed is diesel.
- The brand of the installed engine is N844LT.
- Manufacturer: ISM.
- The number of cylinders in the engine block is 4.
- Rated output power is 45 kilowatts/60 horsepower.
- Type of fuel injection system - electronic, direct.
- Type of cooling system – liquid.
- Specific fuel consumption is 10.5 liters per hour.
Hydraulic system:
- The hydraulic system pump type is gear.
- The hydraulic system pump capacity is 85 liters per minute.
- The lifting capacity of the hydraulic system is 818 kilograms.
Capacity of available containers:
- Fuel tank – 75.5 liters.
- The hydraulic system tank is 16.2 liters.
Dimensions
| Overall working height | ||
| A | with casting/digging bucket with short edge, mm | 3820 |
| A | with low profile bucket with standard lip, mm | 3927 |
| A | with low profile extended bucket, long lip, mm | 4055 |
| Height up to | ||
| B | bucket hinge pin, mm | 3048 |
| C | ROPS cabin top, mm | 1974 |
| D | bucket bottom, fully raised and horizontal, mm | 2877 |
| Overall length | ||
| E | without implement with quick hitch adapter, mm | 2685 |
| F | with foundry/digging bucket located on the ground mm, mm | 3352 |
| F | with low profile bucket, mm | 3456 |
| F | with low profile extended bucket, mm | 3585 |
| Unloading | ||
| G | Unloading angle | 52° |
| H | Unloading height | |
| with casting/digging bucket with short edge, mm | 2377 | |
| with low profile bucket with standard lip, mm | 2251 | |
| J | Unloading reach (at max. height), mm | 783 |
| Max. bucket tilt | ||
| K | Bucket on the ground | 35° |
| L | Bucket at full height | 88° |
| Wheelbase and ground clearance | ||
| M | Wheelbase, mm | 1128 |
| P | Ground clearance (to underbody protective panel), mm | 178 |
| Q | Departure angle | 23° |
| Turning radius | ||
| R | without bucket, mm | 1289 |
| S | with casting ladle in moving position, mm | 2021 mm with 66 in (1676 mm) bucket |
| S | with low profile bucket on the ground, mm | 2132 mm with 66 in (1676 mm) bucket |
| S | with extended low profile bucket on the ground, mm | 2250 mm with 66 in (1676 mm) bucket |
| T | Rear turning radius, mm | 1606 |
| U | From rear axle to bumper, mm | 924 |
| V | Width at the center of tires, mm | 1371 with 10" x 16.5" tires |
| W | Overall width, mm | 1678 |
- Question:
What budget New Holland mini wheel loader models can you offer? Equipment is needed in Vladivostok.
Answer:
At the moment we can offer you the New Holland L218 mini loader...
- Question:
Do you have a mini loader with a 0.45-0.5 cubic meter bucket? m? Equipment is needed in Zheleznovodsk.
Answer:
We have a New Holland L218 mini loader with a bucket capacity of 0...
- Question:
Karelia needs a mini-loader with a lifting capacity of 800-1000 kg. What can you offer from stock? And do they come with pitchforks?
Answer:
Check out the New Holland L218 skid steer. Machine with a lifting capacity of 818...
- Question:
What snow removal equipment can you offer at the site in Saratov?
Answer:
Today we can offer the New Holland L218 mini loader - this equipment is often used for snow removal...
- Question:
Do you have a Hyundai mini loader with a lifting capacity of 800-1000 kg?
Answer:
Unfortunately no. We no longer supply Hyundai special equipment to...
- Question:
How much does a New Holland L218 skid steer cost now? Equipment is needed in Kazan.
Answer:
As of today, the cost of a New Holland L218 mini-loader is $43,500, or about 2,881,000 rubles per machine at the current Central Bank of Russia exchange rate...
- Question:
Do you have a New Holland L230 wheel loader in stock?
Answer:
At the moment this model is not available on our sites...
Other questions
Call us right now and we will help you choose the right equipment for any of your purposes!
8
Other New Holland skid steers
- New Holland L213 mini loader
Manufacturer New Holland Load capacity 590 kg Ladle 0.4 m3 Engine power 49 hp - New Holland L215 mini loader
Manufacturer New Holland Load capacity 680 kg Ladle 0.43 m3 Engine power 52 hp - New Holland L220 mini loader
Manufacturer New Holland Load capacity 905 kg Ladle 0.67 m3 Engine power 60 hp - New Holland L223 mini loader
Manufacturer New Holland Load capacity 1020 kg Ladle 0.53 m3 Engine power 72 hp
Peculiarities
The New Holland L218 mini loader has quite a lot of advantages, namely:
- A completely new design of boom equipment is used, which was patented by the manufacturer as Super Boom. This design made it possible to significantly increase the maximum unloading height of the front bucket than that of its analogues.
- The boom mechanism has a vertical lift.
- Long service life of all structural elements, working equipment, mechanisms and spare parts for this mini-loader.
- Low noise level when the power unit operates at low crankshaft speeds and high performance with the overall overall dimensions of the machine.
- There is a side turn.
- The duration of the full operating cycle has been reduced due to the high power of the power plant.
- The power of the hydraulic system was increased, resulting in easy execution of work related to loading and unloading of any materials and cargo.
- The movements of the front bucket are quite smooth.
- Easy and convenient control of front equipment.
It is also necessary to note other features of the machine:
The equipment is capable of turning 360 degrees right on the spot. As described at the beginning, the design of the machine is well balanced, and accordingly, there is high stability when working with the maximum weight, which reduces the risk of the machine tipping over.
The equipment is multifunctional and capable of performing a large number of different jobs. This is due to the extensive range of attachments, as well as the small overall dimensions. The equipment can cope with any task in a small workspace environment. The operating life was calculated by the manufacturer for 2000 engine hours or one year, but with timely replacement of filter elements and lubricating fluids, it is possible to slightly extend the service life of the mini loader.
Spare parts are widespread and accessible, both in terms of cost and availability, which greatly facilitates the maintenance of this equipment.
Chassis
The New Holland 218 loader has an extended frame, and the machine's center of gravity is lowered. This provides increased stability and prevents tipping over when lifting a load that exceeds the carrying capacity. The 4x4 wheel arrangement increases the maneuverability of vehicles in hard-to-reach places and in rough terrain.
Operator safety is ensured throughout the entire working process. The Glide Ride system also helps reduce vibration and vibration when the truck is moving. The developers took care of installing this system not only on the working equipment, but also on the wheels. This guarantees more comfortable working conditions. When the engine is running, the operator can leave the workplace and the cabin, while the safety of all participants in the work process is ensured by an automatic locking system for the main units.
Return to navigation
Price new and used
You can purchase a New Holland L218 mini-loader in completely new technical condition at a cost of two million Russian rubles. The maximum cost can rise to three million Russian rubles due to the year of production, additional equipment and attachments. The machine can pay for itself in a short time, as it has all the important advantages: versatility, maneuverability, reliability and productivity.
Used equipment costs from 1.8 million to 2.4 million Russian rubles.
New Holland B115 Engine – T7000 Series
The power unit used here is a diesel engine with turbocharging and intercooling of the supplied air CNH445TA EGH, produced by the Case New Holland holding itself. Well, to prevent such advanced technology from falling prey to those who love to drive, the design included an immobilizer, without which the car will not start with the key.
| Model | Engine | Transmission | Chassis | Weight, kg |
| T4.105 | diesel, 3.4 l, 106 l. With. | fur. 12 forward and 12 reverse | 2WD/4WD, differential lock, creeper | 3069 |
| TD5.95 | turbodiesel, 3.4 l, 98 l. With. | auto 12/29 forward and 12 reverse | 4WD, differential lock | 4250 |
| T6090 | diesel, 6.7 l, 174 l. With. | auto 19/29 forward and 6/12 reverse | 2WD/4WD, front axle locking | 5950 |
| T7060 | turbodiesel, 6.7 l, 210 l. With. | auto 18 forward and 2 reverse | 4WD/2x4, differential lock | 7125 — 8126 |
| T8040 | 6-cyl. diesel, 8.3 l, 332 l. With. | auto, Full power shift, 18 forward and 4 reverse | 4WD, block. diff. twin wheels of different diameters | 9750 |
| T9615 | 6-cyl. diesel, 12.7 l, 613 l. With. | auto, Full power shift, 16 forward and 2 reverse | 2WD/4WD, block. diff. twin wheels of different diameters | 25401 |
