Areas of application and characteristics of the KS 45717 crane

Related Articles

Drilling Equipment – ​​Functionality, Efficiency and Reliability

September 18, 2020

Functional and High-Quality Tire Repair Equipment

August 22, 2020

Profitable rental of a manipulator for solving various problems

August 13, 2020

The KS 45717 truck crane is a special equipment designed to work with cargo (25 tons with ordinary cargo and 20 tons with toxic and dangerous cargo), based on the URAL-4320 chassis.

The KS 45717 truck crane (Ivanovets) is, first of all, high maneuverability thanks to the all-terrain all-wheel drive chassis URAL 4320. Thanks to the all-terrain chassis and stability, the URAL crane of this model is recommended for work at emergency sites, when laying pipelines and performing other tasks in low-traffic conditions. The drive of the crane installation is hydraulic, powered by an axial piston pump, which is driven by the base chassis engine - YaMZ-236NE2-3.

Photo of truck crane KS 45717

Convenience of work is ensured by a new approach to the arrangement of the cabin. An ergonomic adjustable (horizontally and vertically) seat, a heating and ventilation system - all this, along with a convenient dashboard, makes control as convenient as possible and reduces operator fatigue. Operational safety is guaranteed by a microprocessor load limiter and telemetric memory.

For what work is KS 45717 used?

KS 45717 is an Ivanovets truck crane, which is indispensable for the construction of various buildings and structures. This technique is most often used on construction sites. But construction is not the only area where it is in demand. KS 45717 is used when performing the following types of work:

• laying of pipelines;
• quarry developments;
• dismantling of buildings;
• elimination of accidents on highways and industrial facilities.

Where are KS 45717 and KS 45717-1 cranes used?

Thanks to the ability to install the crane on Ural vehicles with 6x6 all-wheel drive, this equipment can be used in any difficult terrain. The designers also provided for the possibility of using this lifting mechanism to move toxic loads weighing up to 20 tons.

A crane of this class is widely used to perform tasks such as:

• performing various construction works during the construction of multi-storey buildings;
• laying industrial water pipelines, gas pipelines and heating mains;
• work in open pits;
• dismantling of buildings of various classes and sizes;
• various applications of the Ministry of Emergency Situations to eliminate the consequences of accidents at various facilities.

Truck crane Ivanovets
In addition, truck cranes of this class are widely used by road enterprises, farms and drilling companies.

Varieties of the model

The KS 45717 crane is designed for loading and moving cargo. There are two types of crane:

• 25 tons - for working with ordinary cargo;
• 20 tons - for working with toxic and dangerous goods.

KamAZ truck crane 25 tons KS-45717 - work area

Both types of special equipment are installed on the KamAZ 4320 chassis. The vehicle is an all-wheel drive truck that, like an all-terrain vehicle, is capable of moving on any type of soil.

Design features of the KS 45717 truck crane

Design and controls KS 45717

The crane installation is equipped with a hydraulic drive powered by an axial piston pump, which is started by the YaMZ-236KE2-3 chassis engine.

Lifting and moving of loads is carried out by a telescopic boom. The boom is the main structural element of the truck crane, which consists of three sections 7 meters long. The total length of the boom is 21 meters. The sections are extended using a hydraulic cylinder or pulley blocks.

If the truck crane is intended to perform work that requires lifting a load to a large height, you must immediately order a special extension - a jib. It is a lattice section 7 meters long.

During operation of the KS 45717 crane, the operator must ensure that the weight of the load does not exceed the permissible parameters. To facilitate this process, the crane installation is equipped with a signaling device - a microprocessor limiter. Its functions also include the following:

Microprocessor limiter

• informing about the boom extension length;
• providing information about the height of its rise;
• informing the driver about the size of the load and the maximum weight that the crane can lift to a given height;
• limiting the crane's coverage area when working in small spaces.

This device is equipped with a telemetry memory or a so-called “Black Box”. During operation, it records operating parameters and also remembers what loads the truck crane had to experience throughout its entire service life.

Chassis Features

KamAZ 4320 is a cross-country vehicle. It is able to move at the same speed on any type of road and rough terrain. High cross-country ability is ensured by reinforced front axles and steering, as well as wide-profile tires. Tire pressure is regulated by a centralized system.

Dimensions of KC45717-1P based on KamAZ4320

The car has turbocharged diesel engines. The engine power is 240 hp. With. High traction and fuel economy are ensured by high torque.

Technical characteristics and advantages of Ivanovets brand truck cranes

The reliability and durability of this truck crane is ensured by a high-performance hydraulic drive, which operates from an axial piston pump driven by the base power unit used on the chassis. Modern Ivanovtsev models also feature a special approach to the functionality and ergonomics of the cabin. Height and horizontal adjustment of the operator's seat, the presence of air conditioning systems, as well as a convenient, intuitive dashboard allow you to quickly perform tasks of any complexity without unnecessary fatigue.

Be sure to read: Crane based on the Urals

Truck crane boom KS 45717

The handling capabilities and operating speed of this truck crane are realized using a telescopic boom, divided into three equal sections. Its length, when fully expanded, is 21m, that is, each section is 7m. The take-off movement is carried out using hydraulic cylinders and pulley blocks. In addition, among the additional options for this model of truck crane, we can note the ability to order a lattice boom extension (jib), which allows you to extend the lifting height of loads to 28.2 m. The manufacturer also produces some modifications of this truck crane, with a boom capable of lifting to a height of 30.7 m. This alteration was achieved by manufacturing longer sections.

Crane boom Ivanovets

In the review of this technology, special attention should be paid to the hydraulic drive. Its technical characteristics make it possible to ensure smooth, easy and simple processes for controlling cranes and handling cargo. A wide range of speed modes, as well as the ability to simultaneously perform several operations, can significantly increase the speed, efficiency and safety of performing any tasks.

Microprocessor-based load limit control technology

Among the main software features of the KS 45717-1 modification, one can name the innovative ONK-160 technology, which allows the operator to constantly monitor the actual load of the boom. The microprocessor limiter displays data such as:

• the amount of workload;
• range and size of section overhang;
• actual lifting height of the load head.

The operator can always set limits to ensure safe operation in confined spaces, near utility poles or high-density areas. The telemetry memory will record all operating parameters, recording them in the emergency memory unit of the on-board computer.

Chassis KS 45717

The basic chassis for this equipment is the URAL-4320 vehicle with a 6X6 wheel arrangement. The increased cross-country ability of this vehicle allows the vehicle to be operated regardless of the availability of roads and the intended area of ​​work.

Be sure to read: Technical characteristics of the KS 5363 crane

Wide-profile tires using central pressure regulation, as well as reinforced axles and steering, make it possible to deliver this equipment under its own power to any terrain, be it swampy soil or forested areas. Ural KS 45717-1 is an excellent alternative to less passable cargo platforms, while it was originally designed for the most difficult operating conditions.

Truck crane cabin

Among the alternative options for choosing a chassis for Ivanovets truck cranes, users always have access to the following vehicles:

• MAZ-6312 (6x4);
• KAMAZ-65115 (6x4);
• KAMAZ-65111 (6x6);
• KAMAZ-43118 (6x6) (SUV);
• KAMAZ-65115-62 (6x4);
• KAMAZ-65115-65 (6x4);
• KAMAZ-65111 (6x6).

Construction of the Ivanovets crane cabin

The all-metal construction of the Ivanovets truck crane operator’s workplace is complemented by additional insulation, ensuring silence and comfortable working conditions. In hot weather, the operator will be helped by the ventilation system and the ability to open windows, and a convenient sun visor will help against glare. If it is necessary to carry out work in rainy weather, it is possible to use effective windshield wipers. The cabin also has a thermos for storing drinking water.

General characteristics of the truck crane

The Ivanovets 25 t crane has the following technical characteristics.

When operating the KS 45717 truck crane, the operating temperature range should be taken into account. The minimum air temperature should not fall below -40°C. At -50°C, the vehicle and crane installation will not work. Attempts to operate may lead to breakdowns requiring expensive repairs.

Wind speed must also be taken into account. When lifting and moving a load, the wind speed should not exceed 40 meters per second. Measurements of air temperature and wind speed are carried out at an altitude of 10 meters.

Installation of the support frame of the KS-45717 truck crane

The device of the main components

Main components of the KS-45717 truck crane:

Truck crane KS 45717

• boom equipment;
• automobile chassis;
• stops and support posts;
• thrust bearings;
• hydraulic pump drive;
• rack supporting boom equipment.

Among the rotating parts of the truck crane: counterweight, rotating mechanism, platform and winch, crane operator's cabin.

The telescopic boom consists of three sections with a total length of 21 m. The sections are driven by a hydraulic cylinder. The reach and working space can be increased with a lattice extension.

The hydraulic drive is powered by the vehicle chassis engine. The operating principle of the drive provides a wide range of crane operations and speeds.

Truck crane chassis KS-45717 - Ural-4320 all-terrain vehicle. Designed to work in harsh conditions, off-road. The front axles are reinforced, wide-profile tires. The crane base engine is Euro 4 standard, power 240 horsepower.

How the cabin in the KS model and the driver’s workplace are arranged

The cab of the KS 45717 truck crane is all-metal, designed for three people. You can enter the cabin through one of two doors, located on the right and left. Driver comfort is ensured by increased insulation characteristics. The truck crane cabin is reliably protected from extraneous noise; it is thermally insulated. A reliable ventilation and heating system is installed inside.

The driver's seat of the KS 45717 crane is securely attached to the floor and can be adjusted in several positions at once. The window sashes open outward, increasing the space. In sunny weather, the eyes of the truck crane operator are protected by a sun visor. In adverse weather conditions, good visibility is ensured by high-quality windshield wipers. The cabin is equipped with a thermos in which drinking water or other drinks can be stored.

Load height characteristics

The ability to lift loads with different weights depends on the number of extended sections, the installed jib and the working position of the boom equipment of the truck crane:

• length 9 m – 25 t in the upper position, 6.25 in the lower position;
• 15 meters – 13.75 in the upper, 2.15 in the lower;
• 21 m – 6.35 and 0.9;
• 21+7 jib meters – 1.95 and 0.6.

Hazardous, toxic and explosive substances are lifted by a truck crane with a slightly lower weight - no more than 20 tons in the upper position in the first section and no more than ten tons in the upper position in the second.

Loading capacity of the KS-45717 truck crane