For questions regarding the purchase of this equipment (Hitachi Zaxis ZX110 crawler excavator), terms of credit and leasing, service and warranty, please contact the factory dealers or official representative offices. Hitachi Zaxis ZX110 crawler excavator supplied either directly from the manufacturer or from sites in Moscow and other regions of the Russian Federation.
Hitachi ZX110 excavator engine
| Model | Isuzu BB-4BG1T | |
| Type | diesel, 4-stroke water-cooled, turbocharged | |
| Number of cylinders | 4 | |
| Power according to DIN 6271 system, kW (hp) | H/P mode | 63 (85) at 2150 min-1 |
| P mode | 59 (80) at 1950 min-1 | |
| Power according to SAE J1349 system, kW (hp) | H/P mode | 61 (83) at 2150 min-1 |
| P mode | 58 (79) at 1950 min-1 | |
| Maximum torque, Nm | 340 at 1600 min-1 | |
| Working volume, l | 4,329 | |
| Piston diameter, mm | 105 | |
| Piston stroke, mm | 125 | |
| Battery | 2 x 12 V / 55 Ah | |
| Regulator | mechanical speed control with stepper motor | |
Specifications
The Hitachi front loader is equipped with an Isuzu BB-6BG1T diesel engine. This is a 6-cylinder unit with a power of 96 kW and a displacement of 6.5 liters. Turbocharging is provided.
Main parameters and overall dimensions in meters:
Hitachi LX110-7 loader
- width — 2,32;
- height — 3,14;
- length — 6,75;
- wheelbase — 2,9;
- clearance — 0,4;
- length with front bucket — 6,75.
The canopy rises to a height of up to 5 meters, while unloading is provided at 2.76 meters.
The standard bucket has a volume of 2.3 cubic meters. The operating weight of the Hitachi front loader is 10.09 tons. The gearbox is four-speed.
Hitachi ZX110 excavator hydraulic system
- Operating mode switch
- Digging mode / Attachment mode
- Engine speed control system
| Main pumps | |
| two axial piston pumps with adjustable capacity | |
| Maximum oil supply, l/min | 2 x 100 |
| 1 x 52.5 | |
| Control pump | |
| one gear pump | |
| Maximum oil supply, l/min | 33 |
Hydraulic motors
| Propulsion motors | two axial piston pumps with adjustable capacity |
| Swing motors | one axial piston motor |
Safety valve parameters
| Safety valve parameters | Response pressure |
| Hydraulic circuit of working equipment | 34.3 MPa (350 kgf/cm2) |
| Swing hydraulic circuit | 31.4 MPa (320 kgf/cm2) |
| Travel hydraulic circuit | 34.3 MPa (350 kgf/cm2) |
| Control signal hydraulic circuit | 3.9 MPa (40 kgf/cm2) |
Hydraulic cylinders
High strength cylinder rod and liner. Special shock-absorbing inserts protect hydraulic cylinders from shocks and shocks.
Dimensions
| Quantity | Hydraulic cylinder diameter | Rod diameter | |
| Arrow | 2 | 95 mm | 70 mm |
| Handle | 1 | 105 mm | 75 mm |
| Ladle | 1 | 95 mm | 65 mm |
Hydraulic filters
The hydraulic line uses high quality hydraulic filters. The vacuum filter is located in the suction circuit, and the full-flow filters are located in the return and drain circuits.
Hitachi ZX110 excavator rotary platform
Rotating frame
Robust welded construction provides increased machine durability. The reinforced D-shaped frame protects the turntable from deformation.
Rotation mechanism
Axial piston hydraulic motor with planetary gearbox. The turntable is equipped with a single row ball bearing and an internal toothed gear. The gear drive operates in an oil bath. The turntable parking brake is hydromechanical, disc type.
| Turning speed, min-1 | 13,9 |
Operator's cabin
The spacious cabin, 1005 mm wide and 1675 mm high, complies with ISO standards. Tempered glass provides all-round visibility. The front windows (upper and lower) can be opened. The seats are equipped with armrests, have longitudinal adjustment (can be moved with or without control joysticks) and a reclining backrest.
A few words about the company
At the dawn of its activity, that is, in 1837, the founder of the company, John Deere, of course, did not even dream of producing complex equipment. At that time, he owned a blacksmith shop and a very old saw. But that's not all he had. His main asset was the idea of helping farming. Subsequently, this idea greatly changed the face of agriculture. And not just the United States.
Quality John Deere backhoe loaders is not the goal that the company has strived for throughout its life.
These technical devices are her life. And, it must be said that the company has put a lot of effort into ensuring that they represent the quintessence of the spirit of the organization and its desire to offer the consumer only a first-class product. comments powered by HyperComments
Hitachi ZX110 excavator chassis
Caterpillar
The welded track frame is made of especially strong steel. The track frames are welded to the main frame. The internally lubricated rollers, idlers and sprockets are protected by floating seals.
The main type of track shoes is triple grouser. Flat and triangular profile shoes are also used. The track chain connecting pins are heat treated and equipped with a dust seal. The hydraulic track tensioner is equipped with a spring shock absorber.
Number of rollers and shoes on each side
| Support rollers | 1 |
| Track rollers | 6 |
| Track shoes | 41 |
Travel mechanism
Each caterpillar is controlled by a 2-speed axial piston hydraulic motor through a planetary gearbox, which ensures reverse movement of the tracks. The drive wheels of the left and right sides are interchangeable. The parking brake of the travel mechanisms is hydromechanical, disc type. A safety valve built into the travel motor protects against water hammer when stopping. Automatic transmission with selectable speed (high or low).
| Travel speed, km/h | high | from 0 to 5.5 |
| low | from 0 to 3.6 | |
| Maximum traction force, kN | 91 | |
| Maximum climbable grade, degrees. (%) | 35° (70%) | |
Features of operation
These wheel loaders have an automatic transmission, but there is also the option of manual shifting. In addition to automatically switching to a lower speed, the machine has an automatic clutch switch.
The important operational capabilities of the machine include the following:
LX110-7 front loader in action
- torque is proportionally distributed by the differential;
- function of pausing and returning to digging mode;
- dual-function hydraulic valve controlled by joystick;
- accumulative type of bucket, has a cutting edge;
- electric switch for parking brake.
The reverse signal increases overall safety when working on a construction site. Tipping load - 7.9 tons. This is the mass of cargo at which the equipment can tip over the wheel axle.
Related video: Hitachi LX110-7 loader
Publications on the topic
Hitachi ZX 200 - an example of the best construction equipment from Japan
Shantui SL50W loader – technical parameters and additional equipment
Technical features and advantages of the B-138 front loader
Weights and ground pressure of Hitachi ZX110 excavator
ZAXIS110 - the machine is equipped with a 4.27 m boom, a 2.26 m arm and a 0.45 m3 bucket.
| Shoe type | Shoe width, mm | Weight, kg | Ground pressure, kPa |
| Triple grouser | 500 | 10700 | 36 |
| 600 | 11000 | 31 | |
| 700 | 11200 | 27 | |
| Rubber | 500 | 10800 | 36 |
| Flat | 510 | 11200 | 37 |
| Trihedral | 700 | 11000 | 26 |
Base machine weight including 1800 kg counterweight and triple grouser shoes, excluding attachments, fuel, hydraulic oil, engine oil, antifreeze, etc.):
- 8250 kg with 500 mm wide shoes
Cabin equipment
The front loader is equipped with a ROPS/FOPS system, which provides protection against rollovers and objects falling from above. When driving the Hitachi LX110-7, the driver is safe and can concentrate on the task at hand.
Front and rear windshields with washers allow you to get rid of construction dust at any time. They provide a wide overview of the entire working area. To prevent the driver from being blinded by the sun's rays, a protective visor is installed on the roof of the loader.
For special situations, Hitachi designs include locking systems for the attachment and transmission. They are controlled by moving special levers.
Loader cab LX110-7
The operator feels comfortable inside the cabin, and he is helped in this by:
- air conditioner;
- AM/FM radio;
- interior lighting.
The adjustable mechanically suspended seat is equipped with a seat belt.
Hitachi ZX110 excavator working equipment
The boom and handle are welded, box-section. Boom length 4.27 m; the handle is available in three versions - 1.96, 2.26 and 2.81 m. The bucket is welded with the ability to adjust the lateral play.
| Capacity, m3 | Width, mm | Number of teeth | Weight, kg | Recommendations | |||||
| ZAXIS110 | |||||||||
| According to PCSA standard | According to CECE standard | Without side cutters | With side cutters | Handle 1.96 m | Handle 2.26 m | Handle 2.81 m | |||
| 0,19 | 0,17 | 450 | 550 | 3 | 260 | +++ | +++ | +++ | |
| 0,30 | 0,25 | 580 | 700 | 3 | 290 | +++ | +++ | +++ | |
| 0,40 | 0,33 | 680 | 800 | 4 | 340 | +++ | +++ | +++ | |
| 0,45 | 0,40 | 850 | 970 | 5 | 400 | +++ | +++ | ++ * | |
| 0,50 | 0,45 | 890 | 1010 | 5 | 410 | +++ | ++ | — | |
| 0,59 | 0,50 | 950 | 1070 | 5 | 430 | +++ | + | — | |
| *1 | 0,45 | 0,40 | 850 | 970 | 5 | 450 | +++ | +++ | ++ * |
| *2 | 0,50 | 0,45 | 890 | 1010 | 5 | 500 | ++ | — | — |
| *3 | 0,50 | 0,45 | 890 | 1010 | 5 | 480 | ++ | — | — |
| Trapezoidal bucket: 0.35 m3 CECE with heap, width 800 mm | 3 | 370 | ++ | ++ | ++ | ||||
| Single-shank ripper | 1 | 320 | @ | @ | — | ||||
| Grab bucket: 0.30 m3 560 mm wide | 6 | 690 | +++ | +++ | — | ||||
| Blade: width 1000 mm, length 1600 mm | 430 | # | # | # | |||||
Designations:
| * | Only with 700 mm wide shoes |
| *1 | Reinforced bucket |
| *2 | Bucket with side crown clamp |
| *3 | Bucket modification N |
| +++ | Suitable for materials with a density of 1800 kg/m3 and more |
| ++ | Suitable for materials with a density of 1600 kg/m3 and more |
| + | Suitable for materials with a density of 1100 kg/m3 and more |
| @ | For heavy work |
| # | Slope planning |
| — | Cannot be used |
Hitachi ZX110 Excavator Dimensions
| Characteristic | ZAXIS 110 | ||||
| A | Machine base | 2620 mm (8'7″) | |||
| B | Undercarriage length | 3340 mm (10'11") | |||
| *C | Height from ground level to counterweight | 890 mm (2'11") | |||
| D | Radius of rotation along the machine body | 2130 mm (7'0″) | |||
| D' | Distance from center of rotation to rear counterweight point | 2130 mm (7'0″) | |||
| E | Overall turning width | 2460 mm (8'1″) | |||
| F | Overall cabin height | 2740 mm (9'0″) | |||
| *G | Minimum ground clearance | 440 mm (1'5″) | |||
| H | Track center distance | 1990 mm (6'6″) | |||
| I | Track Shoe Width | G 500 mm(20″) | G 600 mm(24″) | G 700 mm(28″) | F 510 mm(20″) |
| J | Undercarriage width | 2490 mm (8'2″) | 2590 mm (8'6″) | 2690 mm (8'10") | 2500 mm (8'2″) |
| K | Overall machine width | 2500 mm (8'2″) | 2590 mm (8'6″) | 2690 mm (8'10") | 2500 mm (8'2″) |
| L | Machine length with handle 1.96 m (6'5″) | 7220 mm (23'8″) | |||
| Machine length with handle 2.26 m (7'5″) | 7220 mm (23'8″) | ||||
| Machine length with handle 2.81 m (9'3″) | 7240 mm (23'9″) | ||||
| M | Boom height with stick 1.96 m (6'5″) | 2600 mm (8'6″) | |||
| Boom height with stick 2.26 m (7'5″) | 2680 mm (8'10") | ||||
| Boom height with stick 2.81 m (9'3″) | ** 2680 mm (8'10") | ||||
| N | Track height with triple grouser shoe | 790 mm (2'7″) | |||
Designations:
| * | Excluding shoe lug |
| ** | Measurement taken with the handle in transport position |
| G | Triple lug shoe |
| F | Flat shoe |
Geometric parameters of digging Hitachi ZX110 excavator
| Characteristic | ZAXIS 110 | ||||
| Handle length | 1.96 m(6'5″) | 2.26 m(7'5″) | 2.81 m(9'3″) * | ||
| A | Max. digging radius | 7430 mm (24'5″) | 7700 mm (25'3″) | 8180 mm (26'10") | |
| A' | Max. digging radius (soil) | 7290 mm (23'1″) | 7570 mm (24'10") | 8060 mm (26'5″) | |
| B | Max. digging depth | 4780 mm (15'8″) | 5080 mm (16'8″) | 5630 mm (18'6″) | |
| B' | Max. digging depth (8′ level) | 4520 mm (14'10") | 4850 mm (15'11") | 5430 mm (17'10") | |
| C | Max. digging height | 7940 mm (26'0″) | 8110 mm (26'7″) | 8360 mm (27'5″) | |
| D | Max. unloading height | 5530 mm (18'2″) | 5700 mm (18'8″) | 5960 mm (19'7″) | |
| E | Min. turning radius | 2310 mm (7'7″) | 2340 mm (7'8″) | 2600 mm (8'6″) | |
| F | Max. cutting height when digging | 4320 mm (14'2″) | 4620 mm (15'2″) | 5140 mm (16'10") | |
| Bucket digging force | ISO | 90 kN (9,200 kgf, 20,300 lbf) | |||
| SAE: PCSA | 78 kN (8,000 kgf, 17,600 lbf) | ||||
| Handle stroke force | ISO | 60 kN (6,100 kgf, 13,400 lbf) | 55 kN (5600 kgf, 12300 lbf) | 48 kN (4900 kgf, 10800 lbf) | |
| SAE: PCSA | 57 kN (5,900 kgf, 13,000 lbf) | 52 kN (5,300 kgf, 11,700 lbf) | 47 kN (4,800 kgf, 10,600 lbf) | ||
Excluding shoe lug.
