The swamp modification of the industrial tractor type T10M has a 7-roller bogie frame with an increased track and shoes up to 920 mm wide. Ground pressure is reduced to 0.031 MPa. The tractor is designed for efficient work in road, industrial and hydraulic construction, land reclamation and irrigation on soils with low bearing capacity (swamps, snow cover, thawed frozen soil, etc.) at ambient temperatures from minus 50° C to plus 50° WITH.
The tractor can be equipped with a direct electric starting system.
A tractor with bulldozer equipment is designated B10MB.2121
The tractor can be equipped with bulldozer equipment with a straight blade (B4). Ripping equipment is not used on this tractor. Use rigid or pendulum tow hitches. Improved bulldozer equipment with improved lifting and deepening parameters for a swamp tractor is designed for excavation work on soils with reduced bearing capacity.
Specifications
Engine
| Model | D180.121-1 |
| Operating power, kW (hp) | 103 (140) / 132 (180) |
| Rated crankshaft rotation speed, rpm | 1070 |
| Torque reserve, percent | 25 |
| Number of cylinders/working volume, l | 4/14,48 |
| Cylinder diameter, mm/Piston stroke, mm | 150/205 |
| Specific fuel consumption at operating power, g/kW (h/hp/h) | 215 (158)/218 (160) |
B10MB.0121-2B4
| Engine D-180 | |
| Model | D180.121-1 |
| Operating power, kW (hp) | 103 (140) / 132 (180) |
| Rated crankshaft rotation speed, rpm. | 1070 |
| Torque reserve,% | 25 |
| Number of cylinders / Displacement, l | 4 / 14,48 |
| Cylinder diameter, mm / Piston stroke, mm | 150 / 205 |
| Specific fuel consumption at operating power, g/kW (h/hp h) | 215 (158) / 218 (160) |
| Chassis system | |
| Cart | three-point suspension with balance beam with microsprung |
| Number of road wheels on each side | 7 |
| Width of track shoes, mm | 900 or 690 |
| Number of track shoes per side | 45 |
| Specific ground pressure, MPa | 0.03 or 0.042 |
| Frame | |
| Bulldozer frame | reinforced with box-section spars, rigid portal with forward attachment points for long-stroke hydraulic cylinders |
| Transmission | |
| Bulldozer transmission | mechanical or hydromechanical |
| Hydromechanical | three-speed reversible with three-wheel transformer and planetary gearbox. |
| Mechanical | 8 speed |
| Rotation mechanism | side clutches with metal-ceramic friction discs. |
| Control | hydroserved |
| Overall dimensions of the base tractor T-10 MB | |
| Length, mm | 4825 |
| Width, mm | 3230 |
| Height, mm | 3145 |
| Track, mm | 2282 |
| Base, mm | 3225 |
| Weight, kg | 17300 |
| Main dimensions and parameters of bulldozer equipment | |
| Drawing prism volume, m3 | 5,3 |
| Blade width, mm | 4260 |
| Blade height, mm | 1350 |
| Maximum lift, mm | 1220 |
| Maximum depth, mm | 470 |
| Adjustment of cutting angle, degrees. | 10 |
| Weight, kg | 2870 |
| Overall dimensions of the tractor with bulldozer equipment | |
| Height, mm | 3145 |
| Length, mm | 6255 |
| Width, mm | 4260 |
| Weight, kg | 19560 |
The bulldozer-swamp vehicle B-10 MB.0121-2V4 (based on the swamp modification of the T-10 MB tractor) has a 7-roller bogie frame with an increased track.
Ground pressure is reduced to 0.031 MPa. The B-10 MB bulldozer-swamp vehicle is designed for efficient work in road, industrial and hydraulic engineering construction, land reclamation and irrigation on soils with low bearing capacity (swamps, snow cover, thawed frozen soil, etc.) at ambient temperatures from -50 ° C to +50 ° C. The B-10 MB swamp vehicle can be equipped with a direct electric start system. Bulldozer equipment with a straight blade (B4) can be installed on the B-10 MB bulldozer. Ripping equipment is not used on this bulldozer. Use rigid or pendulum tow hitches. Improved bulldozer equipment with improved lifting and deepening parameters for a swamp tractor is designed for excavation work on soils with reduced bearing capacity.
Gear speeds, km/h
Mechanical transmission
| Power, hp | 180 | 140 |
| Forward travel | ||
| I | 2,58 — 3,08 | 2,21 — 2,63 |
| II | 3,58 — 4,26 | 3,06 — 3,64 |
| III | 5,19 — 6,19 | 4,44 — 5,3 |
| IV | 8,75 — 10,38 | 7,48 — 8,89 |
| Reverse | ||
| I | 3,01 | 2,58 |
| II | 4,17 | 3,57 |
| III | 6,06 | 5,19 |
| IV | 10,2 | 8,73 |
Hydromechanical transmission, power 180 hp.
| Forward travel | Reverse | |
| I | 0 … 3,15 | 0 … 3,91 |
| II | 0 … 5,58 | 0 … 6,93 |
| III | 0 … 8,78 | 0 … 10,91 |
Modifications
The bulldozer can be equipped with several types of blades - straight (type B), spherical (type K), hemispherical (type E and E1), rotary (type D). The spherical shape is good for working with bulk materials (coal, peat, snow), the hemispherical shape is more capacious and convenient than the straight one. Rotary blades are used for road and leveling work.
Bulldozers also differ in the number of ripper teeth (one or three), and the types of attached equipment. The LT25 winch can be supplied separately. In addition, there is a swamp model (especially for soft soil). Next, we will consider the main modifications (by the way, there are about 80 of them in total).
B-10M.0101-1E
The model is equipped with a hemispherical blade with a hydraulic skewing cylinder, which increases the productivity of the unit by one fifth. The table shows the main parameters.
Specifications:
| Characteristics | Indicators | Unit measurements |
| Transmission type | mechanical | |
| Tow hitch type | ZhPU (rigid-trailer) | |
| Type of bulldozer equipment | E-type blade | |
| Engine starting system | P-23U | |
| Number of road wheels on each side | 6 | PC. |
| Pump performance NSh-100 | 28,5 | l/min |
| Ground pressure (specific) | 0,054 | MPa |
| Traction force (maximum) | 151,8 | kN |
| Weight (with blade and hard drive) | 18,425 | T |
Photo of bulldozer B10M.0101-EN
B-10M.0111-1E
The difference between this model and the previous one is the five-wheel trolley. The equipment used is the same (LPU and hemispherical blade).
Technical characteristics in the table:
| Characteristics | Indicators | Unit measurements |
| Transmission type | mechanical | |
| Tow hitch type | ZhPU (rigid-trailer) | |
| Type of bulldozer equipment | E-type blade | |
| Number of road wheels on each side | 5 | PC. |
Photo of bulldozer B10M.0111-1E
B-10M.0101-EN
This bulldozer, in addition to the hemispherical blade, has a ripper with one tooth.
| Characteristics | Indicators | Unit measurements |
| Transmission type | mechanical | |
| Type of bulldozer equipment | E-type blade | |
| Attachment type | ripper type H | |
| Weight (with blade and ripper) | 19,905 | T |
B10M.0001-EN
This model, like the previous one, has a hemispherical blade and a ripper with one tooth. But the transmission here is hydromechanical.
| Characteristics | Indicators |
| Transmission type | hydromechanical |
| Type of bulldozer equipment | E-type blade |
| Attachment type | ripper type H |
B10M.0111-EN
A mechanical transmission, a five-wheel trolley, a hemispherical blade and a ripper with one tooth are the differences of this model.
B10M.0111-ER
The letter “P” means that the ripper is used with not one, but three teeth. In addition, this modification assumes the use of any type of blade. Options:
| Characteristics | Indicators | Unit measurements |
| Transmission type | mechanical | |
| Type of bulldozer equipment | dumps type E, K, V, D | |
| Attachment type | ripper type P | |
| Number of rollers on one side | 6 | PC. |
Bulldozer B10M.0111-EN
Accordingly, model B10M.0001-EP has a hydromechanical transmission and a six-roller bogie, and B10M.0111-EP has a mechanical transmission and five rollers on each side.
B10MB.0121-2B4
Finally, we’ll tell you about the swamp model, which is indispensable on thawed and swampy soil. Its features are a seven-wheel trolley, a straight blade, and a pendulum-type trailer.
| Characteristics | Indicators | Unit measurements |
| Transmission type | mechanical | |
| Tow hitch type | MPU (pendulum) | |
| Type of bulldozer equipment | straight wide blade | |
| Number of road wheels on each side | 7 | PC. |
| Number of support rollers | 2 | PC. |
| Track Shoe Width | 0,92 | m |
| Manufacturer of pump NSh-100 | 28,5 | l/min |
| Ground pressure (specific) | 0,031 | MPa |
In the video, the ChTZ B10M bulldozer:
Transmission
The ChTZ tractor has two types of transmission. In one case, the gearbox is mechanical, reversible, designed for eight gears. The rotating device is controlled using a hydraulic server. And in the other there is a hydromechanical gearbox, planetary type, three speeds.
Control
For quick and smooth cornering, the design consists of side clutches that are constantly closed. Metal-ceramic discs. Band type brakes, wear-resistant.
Chassis system
The trolley has a three-point suspension and a sprung balance beam. The tracks are articulated and compacted.
Hydraulic system
The system is separate with a gear-type hydraulic pump with a capacity of 180 l/min. Equipped with a three-spool four-position hydraulic valve of type P160.
Operator's cabin
Cabin B10МNew cabin B10М
The B10M bulldozer cabin has good characteristics. It perfectly protects from bad weather and is comfortable and warm to work in. No cold weather is scary for the driver because... powerful heating. Double glazed windows at the front and rear are equipped with a protective grille.
Dimensions
Explanation of the figure about the dimensions of the tractor model B10M are described in Table 1.
Table 1 — Dimensions of the B10M bulldozer
| Track base (length), m | 2,88 |
| Track base (width), m | 1,88 |
| Length, m | 4,29 |
| Width, m | 2,48 |
| Bucket width, m | 3,31 |
| Length with attachments (max), m | 6,76 |
| Height, m | 3,18 |
Weight of the B10M bulldozer: tractor separately - 15475 kg, unit with blade and ripper mechanisms - 19570 kg.
Overall dimensions of the tractor with bulldozer equipment
| Height, mm | 3145 |
| Length, mm | 6255 |
| Width, mm | 4260 |
| Weight, kg | 19560 |
Additional equipment upon customer requests
| “North” package: — engine pre-heater PZD-30 or Gidronik-35″ (Germany), — additional oil heater in the cabin or air heater “Zenit-8000” (Germany), — fuel heating system, — double-glazed windows, — insulating cover hood |
| And: |
| — oil pump for diesel with P-23U, |
| — turbocharger K-27 (Czech Republic), |
Description
FIND OUT PRICEThe width of the bulldozer blade B10MB of the swamp vehicle is 4.26 meters, the maximum burial depth is 470 mm. The total weight of the bulldozer is 19560 kg, the width of forty-five track shoes is 0.92 meters. As an additional option, the cabin can be insulated for more comfortable operator work in all weather conditions.
Technical characteristics Additional options Warranty and service
Bulldozer B-10MB swamp-moving
We offer T10MB swamp tractors and B10MB bulldozers, new and after major repairs. The equipment can be equipped in various versions and equipped with additional equipment in accordance with the wishes of the customer.
If you want to buy a T-10MB tractor or a B-10MB bulldozer, call 8 or send a request by email [email protected]
Year of release: 2022
Bulldozer B10STB.01-1 swamp-moving price on request
Complete set (D-180 engine, mechanical transmission, 7-roller bogie, hard drive, straight blade)
The warranty period is 12 months or 1500 operating hours
The equipment can be completed in various versions and equipped with additional equipment (Rippers, blades of all modifications, bar installation, cable-laying equipment, operator protection, air conditioning and autonomous heater) in accordance with the wishes of the customer.
All equipment is in stock and has a guarantee.
The B10MB bulldozer is a swamp modification of the industrial bulldozer type B10M (B-10M) and has a 7-roller bogie with an increased track and shoes up to 900 mm wide. Ground pressure is reduced to 0.031 MPa. The bulldozer is designed for effective work in road, industrial and hydraulic construction, land reclamation and irrigation on soils with low bearing capacity (swamps, snow cover, thawed frozen soil, etc.) at ambient temperatures from minus 50° C to plus 40° WITH.
The B10MB bulldozer can be equipped with a direct electric starting system. A tractor with bulldozer equipment is designated B10MB.2121.
The B10MB bulldozer is equipped with bulldozer equipment with a straight blade (B4). Ripping equipment is not used on this bulldozer. Use rigid or pendulum tow hitches. Improved bulldozer equipment with improved lifting and deepening parameters for a swamp bulldozer is intended for excavation work on soils with reduced bearing capacity.
Tractors T-10 T-10MB, bulldozers based on B-10.0111-1E, B-10MB.0121-1B4 are shipped to any region of Russia by rail, road carriers, passing cargo to the cities of: Anadyr, Arkhangelsk, Astrakhan, Barnaul, Belgorod, Blagoveshchensk , Bryansk, Vladivostok, Vladimir, Volgograd, Vologda, Vorkuta, Voronezh, Gorno-Altaisk, Yekaterinburg, Ivanovo, Izhevsk, Irkutsk, Yoshkar-Ola, Kazan, Kaliningrad, Kaluga, Kemerovo, Kirov, Kostroma, Krasnodar, Krasnoyarsk , Kurgan, Kursk Kyzyl, Labytnangs, Lipetsk, Magadan, Moscow, Murmansk, Naryan-Mar, Nizhny Novgorod, Novgorod, Novosibirsk, Omsk, Eagle, Orenburg, Penza, Perm, Petropavlovsk-Kamchatsky, Pskov, Rostov-on-Don, Ryazan, Salekhard, Salekhard, Samara, St. Petersburg, Saransk, Saratov, Smolensk, Stavropol, Surgut, Syktyvkar, Tambov, Tver, Tomsk, Tula, Tyumen, Ulan-Ude, Ulyanovsk, Ufa, Khabarovsk, Khanty-Mansiysk, Cheboksary, Chita, Yuzhno-Sakhalinsk , Yakutsk, Yaroslavl.
Technical characteristics of the B10MB swamp bulldozer
Engine for B10MB
| Model | D180.121-1 |
| Operating power, kW (hp) | 103 (140) / 132 (180) |
| Rated crankshaft rotation speed, rpm | 1070 |
| Torque reserve,% | 25 |
| Number of cylinders, pcs. / Working volume, l | 4 / 14,48 |
| Cylinder diameter, mm / Piston stroke, mm | 150/205 |
| Specific fuel consumption at operating power, g/kW (h/hp/h) | 215 (158) / 218 (160) |
Chassis on B10MB
| Three-point suspension with balance beam with microsprung. | |
| Number of support rollers on each side, pcs. | 7 |
| Width of track shoes, mm | 900 or 690 |
| Number of track shoes on each side, pcs. | 45 |
| Specific ground pressure, MPa | 0.03 or 0.042 |
Tractor frame B10MB
| An elongated frame with reinforced box-section side members, a rigid portal with forward attachment points for long-stroke hydraulic cylinders. |
Transmission B10MB
| Transmission - mechanical or hydromechanical |
| Hydromechanical: three-speed reversible with three-wheel transformer and planetary gearbox |
| Mechanical: 8-speed |
| Rotation mechanism: side clutches with metal-ceramic friction discs |
| Management: hydroserved. |
Travel speeds with manual transmission, km/h
| Power, hp | 180 | 140 |
| Forward travel | ||
| I | 2,58 | 2,21 |
| II | 3,58 | 3,06 |
| III | 5,19 | 4,44 |
| IV | 8,75 | 7,48 |
| Reverse | ||
| I | 3,01 | 2,58 |
| II | 4,17 | 3,57 |
| III | 6,06 | 5,19 |
| IV | 10,2 | 8,73 |
Travel speeds with hydromechanical transmission, km/h
| Forward travel | Reverse | |
| I | 0 … 3,50 | 0 … 4,35 |
| II | 0 … 6,22 | 0 … 7,72 |
| III | 0 … 9,80 | 0 … 12,16 |
Dimensions of the tractor
| Length, mm | 4960 |
| Width, mm | 3230 |
| Height, mm | 3075 |
| Track, mm | 2282 |
| Base, mm | 3225 |
| Weight, kg | 18170 |
Main dimensions and parameters of bulldozer equipment
| Drawing prism volume, m³ | 5,3 |
| Blade width, mm | 4280 |
| Blade height, mm | 1350 |
| Maximum lift, mm | 1220 |
| Maximum depth, mm | 470 |
| Cutting angle adjustment, degrees | 10° |
| Weight, kg | 2870 |
Overall dimensions of the tractor with bulldozer equipment
| Height, mm | 3145 |
| Length, mm | 6255 |
| Width, mm | 4260 |
| Weight, kg | 19560 |
