"Crosser" (motoblock): description, characteristics, spare parts, types and reviews

walk-behind tractors have been in great demand lately. Their gearboxes are mainly of the belt type. On average, the power of diesel-type walk-behind tractors does not exceed 5 kW. The fuel consumption of the devices varies quite a lot.

The engines of walk-behind tractors are usually of the three-stroke type. Not all modifications are suitable for processing hard soils. Nowadays, a good model of the presented brand costs around 55 thousand rubles.

Types of devices

First of all, the devices differ from each other in the type of engine. Modifications with asynchronous and three-act devices are available on the market. The cooling system is used of air or water type. Small-sized modifications are made with asynchronous motors. The maximum frequency for walk-behind tractors of this type does not exceed 5 thousand revolutions per minute. Large models are often equipped with three-stroke engines. The maximum frequency for walk-behind tractors of this series does not exceed 6 thousand revolutions per minute.

User manual

The engine and walk-behind tractor manual are the main documents regulating the operation of the machine, the rules for its assembly and startup after assembly. Retain these documents throughout the life of the device. In case of breakdowns during the warranty period, contact the service center to troubleshoot the problem.

First launch and run-in

When starting the Crosser walk-behind tractor, the gear shift knob should be in the neutral position. After the first start, the engine should run idle for several minutes (rpm 1500-2000 per minute). If there is no extraneous noise or knocking, continue working with the unit.

Important! Running in a walk-behind tractor lasts on average 15-20 hours.

It is prohibited to: load the equipment as much as possible while the running-in period is in progress; use heavy mounted implements, plow virgin soil. After running-in, the device can be used with any additional devices.

Description of the CR-M2 model

These are inexpensive and high-quality Crosser walk-behind tractors. It is quite difficult to get spare parts for them in the store. It is also important to note that the model only uses one plow. The wheels of the walk-behind tractor are of small diameter. However, their cross-country ability is normal. The device is suitable for soil cultivation. The model's gearbox gets clogged very rarely.

The motor overheating protection system is of the third class. If you believe customer reviews, the clutch works fine. The width of the plow in this case is exactly 90 cm. A contact starter is used to start the engine. It very rarely fails. The piston stroke of the walk-behind tractor of the presented series is only 77 mm. You can buy a model in an agricultural equipment store at a price of 59 thousand rubles.

Attachments

Thanks to the use of additional equipment, the value of the walk-behind tractor increases significantly, since it can be used to perform many functions. Many owners noted that the speed of processing the site increases significantly, and human power is also saved.

The following equipment is available for Crosser cultivators:

• Harrows - make it easier to plow the land, while breaking up large pieces.
• Wheels are included with the walk-behind tractor, but for driving on snowy terrain it is best to use tracks, which are worn instead of wheels and increase the traction area of ​​the machine with the ground.

Customer reviews about the CR-M1 device

These Crosser walk-behind tractors generally receive good reviews from customers. Owners value the device for its durable plow. In this case, the motor is a three-stroke type. In total, the model has two cutters. If desired, the plow can be removed without problems. The walk-behind tractor is driven by a belt type. The gearbox is designed for five speeds.

The cooling of the walk-behind tractor of this series is of the air type. Diesel of any brand is used to refuel the device. Together with the plow, the walk-behind tractor weighs approximately 230 kg. The modification power is at 3.5 kW. In terms of dimensions, this walk-behind tractor can be called quite bulky. For large plots of land the device is not best suited. You can buy a CR-CR-M1 walk-behind tractor at a price starting from 48 thousand rubles.

Owner reviews

Reviews from owners speak about the engine power and performance of Crosser walk-behind tractors. However, the lack of an adjustable handle brings some discomfort.

Maksim:

The good thing about the Crosser CR-M8 walk-behind tractor is its power and the use of diesel fuel. I bought it quite a long time ago and managed to identify the following shortcomings: it doesn’t start well in winter, maybe it’s just me who’s so lucky, but the brakes don’t work. I don't like the open belt drive.

Alexander:

I am also the owner of the Crosser CR-M8 walk-behind tractor and I think that the manufacturers have done little work on the engine starting system. Doesn't start well. The main advantage is its significant weight, which rather helps in processing the area than hinders it. When I put on the lugs, I don’t notice any problems with moving on the ground. 8 speeds is good, as it is very convenient and fast to move around on it, but the oil disappears quite quickly.

Paul:

I’ve been using the Crosser CR-M7 walk-behind tractor for a year now and during this time we’ve tried everything on it. The engine is excellent and starts instantly. For me, a significant disadvantage was the weight of the walk-behind tractor, because it turned out to be difficult to transport and even difficult to hold during cultivation. The control handle is low and not adjustable, so you have to bend over, which is very uncomfortable and after a while your back starts to hurt. However, it’s still easier to use than doing it manually, so I don’t regret buying it.

We invite you to leave your feedback on Crosser walk-behind tractors so that our readers can learn in detail about the advantages and disadvantages of the models presented.

Consumer Opinions on the CR-M5

This is a universal and high-quality walk-behind tractor. Spare parts for it are cheap. It is also important to note that the device comes with an excellent plow. The performance of the equipment is quite high. The piston stroke of the walk-behind tractor of this series is at around 87 mm.

The motor overheating protection system is of the second class. If you believe customer reviews, the gearbox can withstand heavy loads. To start the model, a contact starter is used, which works instantly. The cooling system is air type. For the purpose of processing large areas, the device is well suited. The model is also often used by summer residents. However, the walk-behind tractor of this series still has disadvantages. First of all, this concerns weak adhesion.

The gearbox discs have to be changed frequently. The tank in the device has a small volume. The manufacturer does not provide water cooling for the walk-behind tractor. The model moves very hard on hard ground. You can buy a Crosser M5 walk-behind tractor in an agricultural equipment store for a price starting from 63 thousand rubles.

Advantages of Crosser walk-behind tractors

The fact that this technology is far superior to all modern analogues is evidenced not only by its outstanding technical characteristics, but also by user reviews.

All models of Crosser units are distinguished by the following features:

1. High build quality, reliability and durability of all components and mechanisms. Even under heavy loads, the equipment operates without squeaks or backlash.
2. Practicality of the power plant. The water-cooled diesel engine produces high torque and does not stall under any operating conditions. Starting is easy even in manual mode.
3. Sophisticated transmission. The presence of direct and low gears allows the operator to choose the optimal operating mode. The presence of reverse provides excellent maneuverability and ease of cornering.
4. Ease of management. The device is well centered. The worker does not need to make extra efforts to maintain balance and keep the walk-behind tractor on course. All levers are located on the handle, it is possible to fix the throttle.
5. Economical. The initial costs of purchasing a walk-behind tractor quickly pay for themselves due to the low consumption of inexpensive diesel fuel. Even in extreme load mode, the engine consumes no more than 1.5 l/h.
6. Easy to maintain and store. Gaskets, bushings and oil seals that are installed on the walk-behind tractor are designed for a service life exceeding the service life of the engine. The lubricant does not leak due to overheating and is not washed off with water. All maintenance consists of cleaning the unit from dirt, replacing consumables and refilling oil. You can store the walk-behind tractor in any closed room, regardless of humidity and temperature. It is not recommended to store equipment outdoors, as ultraviolet radiation destroys rubber and plastic.
7. Safety in operation. All moving parts of the unit are covered with protective covers made of durable plastic. The risk of injury and damage to the environment is completely eliminated.
8. Multifunctionality. The presence of two power take-off shafts, brackets and couplings provides unlimited possibilities regarding the scope of application of the unit.

The warranty on new walk-behind tractors from the manufacturer is 24 months. In the event of a breakdown, delivery to the service center and repairs are carried out at the expense of the official Crosser dealer. However, cases of premature equipment failure are extremely rare. The manufacturer announces a service life of walk-behind tractors of at least 10 years, regardless of their operating conditions.

Characteristics of the CR-M7 modification

The presented heavy walk-behind tractors "Crosser" usually receive good reviews. First of all, this model is valued for its high engine power. In this case, it is used of the three-stroke type. In total, the walk-behind tractor uses two plows. The height of this unit is 92 cm. The engine capacity of the walk-behind tractor is exactly 340 cubic meters. see. Its cooling is water type. The drive is belt driven.

If you believe customer reviews, the model’s gearbox is well protected. The starter is used as a contact type. The piston stroke of the walk-behind tractor is 88 mm. The tank in this case is located at the rear of the structure. The operating speed of the walk-behind tractor is a maximum of 19 km/h. The device is not best suited for cleaning large areas. The oil tank of the walk-behind tractor of this series is set to 5.5 liters. You can buy this model for only 61 thousand rubles.

Trailed equipment

Slippery soil and wet snow can become a problem even for a heavy walk-behind tractor. It does not always have enough weight when raising virgin lands.

Improving traction with the ground and increasing the maneuverability of the unit is achieved by using the following devices:

• Weights. They are divided into wheeled and external. Wheel weights are disk-shaped parts that are attached to the hub or axle shaft. Disks can be monolithic or hollow, filled with sand. External weights are suspended directly from the frame or screwed to a frame that is made independently.
• Ground hooks. The rim of the lugs is made in the form of a plate with welded blades. The diameter of the devices can reach 70 cm with a weight of 1 pair of 40-80 kg. Ground hooks are installed instead of pneumatic wheels.

You can turn a walk-behind tractor into a small tractor using towed devices. The most affordable is the single-axle adapter with 1 seat. More functional equipment are carts and trailers. They are produced with 1 or 2 bridges. In winter, sleds on runners or with a flat bottom are attached to the hitch. The walk-behind tractor is capable of transporting a trailer or sled weighing up to 800 kg at a speed of up to 16 km/h. For driving on slopes and rough terrain, it is possible to improve the stability of the unit. To do this, axle extensions are installed on it, allowing the wheelbase to be extended to 100 cm.

Description of the CR-M8 model

The Crosser M8 walk-behind tractor has a lot of advantages. Among them, it is important to mention quality wheels. In this case, it is quite difficult to remove the plow yourself. It is also important to note that the model uses a rather weak stand. Cleaning filters must be changed periodically. The maximum power of the walk-behind tractor is 4.3 kW. The user can buy this model for a summer residence at a price of 48 thousand rubles.

Customer reviews about the CR-M11 device

The CR-M11 diesel walk-behind tractor is produced with an asynchronous engine. If you believe customer reviews, it starts quite quickly. Of the features of this model, it is important to note the large weight, as well as the wide plow. His seat height is average. If necessary, you can remove the cutter on the device yourself. In this case, the engine capacity is 388 cc. cm. The walk-behind tractor of the presented series weighs only 270 kg.

Its oil tank is located at the bottom of the structure. The piston stroke at average speed is no more than 47 mm. The operating speed of the equipment is 12 km per hour. The gearbox is used with a belt unit. The maximum power of the walk-behind tractor is 3.3 kW. The drive in the device is of the belt type. The minimum power of the walk-behind tractor is 1.2 kW. The standard modification set includes three plows to choose from. In this case, the minimum operating speed is 2 km/h. If necessary, you can sharpen the cutter yourself. However, it is important to note that it is sometimes very difficult to install it in its original place. The starter deserves special attention in the device. In this case, it is used of the contact type. The maximum frequency of the walk-behind tractor is 4 thousand rpm.

The device is well suited for summer cottages. The cylinder diameter of the modification is 30 mm. The oil tank of the walk-behind tractor of the presented series is designed for 4.5 liters. If customer reviews are to be believed, the gearbox works well. In this case, the discs wear out very slowly. The device is excellent for cultivating hard soil. You can buy the specified walk-behind tractor (diesel) “Crosser” in an agricultural equipment store at a price of 57 thousand rubles.

Model range overview

The power spread between different models is quite large: from 6 to 10 horsepower. Equally positive reviews note the performance of both categories of equipment. Next, we will take a closer look at the most popular and best-selling Crosser units.

The following parameters are common to all Crosser models:

• large equipment (a heavy diesel walk-behind tractor will probably be equipped with a plow and cutter, like most similar devices from other manufacturers);
• availability of equipment with both manual start and start from an electric starter;
• user manual;
• warranty duration 24 months;
• ability to work with a large range of attachments;
• technical characteristics at the level of a professional walk-behind tractor.

Gasoline walk-behind tractors

Crosser line of petrol walk-behind tractors:

• CR-M1, weight 82 kg, air cooling, power 6.5 hp;
• CR-M5, gasoline, with air forced cooling, power 6.5 hp (mill included), weight 84 kg;

Motoblock Crosser CR-M1

Motoblock Crosser CR-M2

Motoblock Crosser CR-M11

• CR-M11, gasoline, air cooling, forced type, power 9 hp (mill included), weight 125 kg, m11 is in demand because of its power, in fact it is identical in its capabilities to its diesel brother of the m12e series;
• CR-M2, 6.5 hp, air cooling, weight 82 kg.

Diesel walk-behind tractors

Crosser line of diesel walk-behind tractors:

• CR-M12E, 12 HP The representative m12e is the most powerful equipment in this Crosser line. The cost of the new m12e starts from 92 thousand rubles;

Consumer Reviews of the CR-M6E

For the purpose of cultivating agricultural land, these walk-behind tractors are often used. In this case, the cutter is used with a small width. If you believe customer reviews, the height of the plow can be adjusted quite simply. The cutter connects to the walk-behind tractor without any problems.

The drive in the device is of the belt type, and the engine is three-stroke. The maximum power of the walk-behind tractor of this series is 4.4 kW. The cooling system is air type. In total, the model has two attachments. The CR-M6E walk-behind tractor of the Crosser brand can be purchased at a price starting from 59 thousand rubles.

Walk-behind tractor equipment

Crosser CR-M6 units are delivered to retail outlets in disassembled shipping containers. After receiving the goods, they are assembled and checked for the presence of accompanying documentation, completeness and functionality. Only after this the products go on sale.

In the basic configuration, the unit is equipped with wide pneumatic wheels with a special tread.

The following equipment is included with the motor cultivator:

• Modular cutters. They are installed separately on the hitch. This solution allows you to use the equipment as a motor cultivator with minimal stress on the worker’s hands and back. The cutters are made by forging from durable hardened steel. The shape of their teeth is well thought out. When cultivating soil with modular cutters, deep loosening and complete removal of weeds along with the roots are ensured. Plants are wound around the cutters as they pass through the area.
• Adjustable plow. This device is supplied together with a hitch that allows you to set the desired plowing depth. The ploughshare is adjustable horizontally, which makes it possible to choose the optimal angle of attack and direction of the soil dump. In the local area, the plow is used to loosen the soil before excavating it and lay ditches for the purpose of laying communications.
• Headlight for work in the dark. The headlight is equipped with a halogen lamp, providing good visibility under any conditions (dust, fog, precipitation). Sealed gaskets protect the lamp from moisture.

Crosser CR-M5 units and other models of this manufacturer have wheels with a special tread shape, which provides the walk-behind tractor with excellent maneuverability in snow and wet soil.

The walk-behind tractors are supplied with a warranty card, a lubrication card and an instruction manual. A proprietary set of tools allows you to quickly assemble and disassemble the unit, carry out minor repairs and maintenance.

Characteristics of the CR-M8E modification

This walk-behind tractor has pretty good characteristics. The rated power of the model is as much as 4.4 kW. It is also important to note that the maximum frequency is at around 4 thousand revolutions per minute. The piston stroke at maximum power is no more than 82 mm. The motor overheating protection system is of the third class. The walk-behind tractor of the presented series weighs as much as 180 kg. Its cooling system is of the air type. The oil tank in the device is installed near the gearbox. The starter used is of high quality. The CR-M8E walk-behind tractor can be found at prices starting from 66 thousand rubles.

Model Description CR-M10E

The CR-M10E walk-behind tractor of the Crosser brand is ideal for processing soft soils. Its cross-country ability is at an average level. The fuel tank in the design is installed next to the engine. The rated power of the unit is at around 4.5 kW.

Together with the plow, the device weighs exactly 240 kg. It uses a third-class engine overheating protection system. It is also important to note that the walk-behind tractor has a good cutter. The device’s comfortable handle deserves special attention. At maximum power, the maximum cylinder stroke is 78 mm. You can buy a walk-behind tractor from the presented series at a price of 63 thousand rubles.

Chapter I: SAFETY RULES

The driver must read these operating instructions for the Crosser M12-1, M12-2 walk-behind tractor before starting operation. It is forbidden to transport people on the wing of the tractor. Children are prohibited from being near a working tractor. Pay attention to the safety signs on the tractor. Be extremely careful. Your safety depends on it. Before starting the engine, make sure that the protective covers are installed correctly and securely. Before starting the engine, make sure the gear shift lever is in neutral and the hydraulic pump clutch lever is in the middle position. Do not run the engine indoors. Engine exhaust fumes are toxic and harmful to your health and can cause suffocation. Before you start driving, make sure there are no obstacles or people in front of you. Always start in a low gear and then shift up. Choose a safe driving speed that matches the road surface.

Notes:

Modified walk-behind tractors are designed for agricultural work. Following the rules for operating, caring for and repairing the machine, which are given in this manual, is a basic element of the correct use of the equipment provided by the manufacturer.

The equipment must be used, maintained and repaired by people who have been trained in advance and are familiar with the safety rules. Users of walk-behind tractors are always responsible for general safety and accident prevention rules, as well as driving rules.

Any arbitrary change in the design of the walk-behind tractor releases the manufacturer from liability for any damage or loss resulting from these changes.

The manufacturer and all distribution organizations, including national, regional

National and local distributors will not be responsible for damage that is caused by parts not manufactured by the tractor manufacturer, including those that were manufactured by the manufacturer but have been refurbished and reused to repair the implement.

The purpose of this manual is to familiarize the tractor owner with the correct

management and maintenance. Remember that the time spent caring for your machine will extend its life. Pay particular attention to instructions related to fuel filtration, air cleaner maintenance, and lubrication. Remember that poorly purified fuel causes wear and tear on the fuel system, and improper air cleaner maintenance

leads to premature wear of the engine cylinder-piston group.

Please ensure that the engine oil is changed after every 50 hours, but at least once a year.

Precautionary measures

Crosser motorcycles are designed with your safety in mind. However, there is no substitute for caution and attention in preventing accidents.

Please remember that this equipment has been designed and manufactured exclusively for agricultural and utility applications. The use of the drive machine for other purposes is only possible after agreement with the manufacturer. Do not wear loose clothing that could get caught in moving parts. Check that all rotating parts connected to the output shaft are properly covered. Motor vehicles must be operated by people who are trained in their operation and maintenance. Do not attempt to increase engine speed to maximum by changing fuel system settings. Do not change the pressure replacement valve settings of various hydraulic circuits, hydraulic lift and valves. Do not operate the walk-behind tractor if you are not feeling well.

Starting the engine

Before starting the engine, check that the parking brake is set and the transmission and power take-off are in neutral. Make sure all attachments are lowered to the ground before starting the engine. Make sure that all safety components are correctly installed before starting the engine.

Do not attempt to start or operate the engine before you are in the driver's seat.

Control Crosser M12-1,M12-2

Carrying passengers is prohibited!

Choose the most suitable wheel track width for the job, always ensure stability. Release the clutch pedal gradually: abrupt engagement, especially if the clutch is released on a bumpy surface, in a hole or on muddy soil, or when driving down a steep slope, can cause the tractor to sway dangerously. Press the pedal immediately if the front wheels leave the ground. When descending a hill, keep the gear engaged. Never depress the clutch or drive equipment in neutral. While driving, the driver must sit correctly in the driver's seat. Do not jump onto a moving drive machine. Always press the brake pedal gently. Do not turn at high speed. Always drive at a safe speed depending on the surface being processed. When working on uneven ground, use appropriate precautions to ensure stability. When working on an inclined surface, such as a hillside, work at a moderate speed and slow down the walk-behind tractor, especially when turning. Drive with extreme caution when driving close to the edge of a ditch or embankment. Check the brake and clutch pedal settings. When driving on the road, press the brake pedals together using the latch. Pressing unconnected pedals may cause the vehicle to skid. Also, avoid overheating your brakes.

Towing and transportation

To maintain the stability of the equipment during operation, properly adjust the towing device of the trailer or towed equipment. For your safety, do not transport a trailer without a self-contained brake system. Drive slowly when towing a heavy load. Always use a proper tow hitch when towing a trailer. When towing, never negotiate a curve with the differential locked, as you may lose control. Using attachments and mechanisms Do not attach equipment designed for more powerful equipment to the walk-behind tractor. Never stand between the equipment and the attachment to make adjustments to the attachment or hitch while it is backing up. Never turn on the power take-off shaft connected to the operating mechanism until you make sure that there are no unauthorized people or objects in the area of ​​operation of this mechanism.

Stop

Never leave the attachment in a raised position while the motorcycle is standing for a long time; lower the attachment before turning off the engine. After completing the work, be sure to move the gear shift lever to the neutral position, disengage the power take-off shaft, apply the parking brake to the applied position by pulling the handle, and stop the engine. In addition, when leaving the equipment unattended, always take the ignition key. When parking, select a level area, engage the gear and handbrake. When parking on a slope, in addition to the parking brake, engage first forward gear if you are standing uphill, or first rear gear if you are standing downhill. Don't forget to do the same if you are parking with a trailer.

Service

If the coolant (water) in the cooling system has boiled, run the engine at idle speed and cool sufficiently before

how to open the radiator cap. After the engine has been off for some time, slowly rotate the cap to relieve pressure before opening it completely.

Disconnect the negative battery cable after working on any electrical parts of the system or assembly. Before disconnecting any hydraulic line or hose, ensure that the system is not under pressure. Hydraulic oil may leak under pressure, which can cause serious injury. Therefore, when searching for or repairing oil leaks, be sure to use appropriate safety equipment, such as face shields, safety glasses, and gloves.

Before inspecting, cleaning, repairing or servicing any mounted or attached equipment, ensure that the engine is stopped, the transmission is in neutral, the brake is locked, the power take-off shaft is disengaged and all other moving parts are secured. Do not repair tires without the appropriate tools and experience. Any incorrect installation of the tire can seriously injure you. If there is any doubt, contact competent persons. Do not fill the fuel tank completely when working in hot, sunny weather, as the fuel may expand and leak. If this happens, wipe up any fuel stain immediately. The fuel is highly explosive. Never refuel equipment while the engine is running, or while it is still hot, near an open flame, or while smoking.

Customer reviews about the CR-M12E device

The walk-behind tractors of the presented series are great for farming. Their maximum power is 3.3 kW. In this case, the drive is used as a belt type, and the frequency fluctuates around 4 thousand revolutions per minute. If you believe customer reviews, the gearbox can last for many years. Her discs practically do not wear out. The engine capacity of the walk-behind tractor is 87 cubic meters. cm. In terms of dimensions, this equipment can hardly be called compact, and it weighs as much as 213 kg with a plow. On the market, sellers are asking about 53 thousand rubles for the presented walk-behind tractor.

Operation of the walk-behind tractor

The operation of the walk-behind tractor begins with its running-in, which is understood as a series of actions designed to extend the service life of the walk-behind tractor and run-in all parts. It is very important to carry out a break-in not only after purchase, but also after a long period of inactivity of the walk-behind tractor. By the way, it is recommended to store it in a dry, ventilated area.

By following the steps below, you can keep the walk-behind tractor in working condition for a long time:

Important! During the first 5 hours of starting operation, it is not advisable to overload the walk-behind tractor.

1. Warm up the engine for 3 minutes.
2. During running-in, soil cultivation is carried out in 2-3 passes, each time to a depth of no more than 10 cm. Take a break every 30 minutes.
3. Be sure to check the fuel and oil levels before starting the unit.

Regular technical inspections must be carried out according to the schedule proposed in the instructions.

Oil type TAD-17 and/or MS-20 is poured into the gearbox. Filling is required to the appropriate level, which is indicated by the control point. The oil change is carried out while the engine is still warm. When operating a walk-behind tractor with a gasoline engine, fuel is filled with an octane rating of A-92.