Review of attachments for Ugra walk-behind tractors

Advantages of Ugra NMB-1N7

Let's take a closer look at the main advantages of this model:

• reliability and durability, confirmed by good reviews from owners;
• the presence of two power take-off shafts (this feature allows you to connect various mounted and trailed equipment to the walk-behind tractor, including rarely used ones, for example, a feed crusher, pump, mower);
• powerful Chinese factory-made engine - Lifan (Lifan 168F-2A, 6.5 hp);
• moderate noise level;
• easy starting from a place;
• instant shutdown function when switching to “STOP” mode;
• reduction gear;
• gearbox;
• compliance of this model and the entire Ugra model line with European safety standards;
• Ugra walk-behind tractors work with a wide range of additional equipment, both trailed and mounted. Installation of foreign attachments is allowed if the dimensions of the fastenings match and the necessary couplings are available;

The Ugra NMB-1N7 walk-behind tractor can perform work in the speed range from 3.5 km/h to 8.52 km/h. In reverse, the car speed is 2.2 km/h. The maximum weight for transporting cargo with a walk-behind tractor, taking into account the fully loaded trolley, is 350 kg.

If transportation is necessary, the Ugra NMB-1N7 walk-behind tractor can be disassembled and transported in the trunk of a passenger car. The cost of the factory model of this unit, according to the website of the Kaluga Motor Plant, is 39,600 rubles. You can check the relevance of prices with representatives of Kadvi brand stores or by calling the manufacturing plant.

The Ugra NMB-1N7 walk-behind tractor is supplied complete with two cultivator cutters, two pneumatic wheels, a hitch, a coulter, and a bracket for it.

Review of the Ugra NMB-1N7 walk-behind tractor with adapter:

Owner reviews

Mikhail, 40 years old:

I want to pay tribute to both types of cultivator cutters. Both saber and crow's feet perform well in even the densest soils. When I work with virgin soil, I use paws; I prefer to mill previously cultivated soil with saber knives. The soil becomes very soft and fluffy. Immersion in the soil for light soils is 320 cm, I take loams and virgin soil in three passes, 10 cm per pass. True, the walk-behind tractor sometimes gets buried, but here I’m awake and on the alert. I almost never use the plow, except in the fall, when I want to prevent bugs, worms and weeds (which the birds will peck and freeze over the winter).

Evgeniy, 35 years old:

My “Ugra” has already worked for 4 years and is still in working order. The Lifan engine has never failed. There is all the necessary equipment for the walk-behind tractor, including a vibrating potato digger and a wood splitter. Initially I bought a regular digger, simple and without bells and whistles. Everything worked, but... 30% of the harvest remained in the ground! Then I consulted and decided not to save money - I bought a vibration attachment. To be honest, it’s not possible to harvest everything 100%, but 92% of the potato harvest goes to my cellar. But I made the wood splitter myself - I watched enough videos on the Internet and found the drawings. It turned out to be an excellent unit; within a day or two I can prepare a supply of firewood for the winter (stove heating), and this, you see, is not enough. And what’s nice is that I don’t overwork one bit, the walk-behind tractor does everything itself.

Attachments

The factory line of attachments from Kadvi includes the following units and products:

• driving module;
• blade shovel;
• snow blowers of various models;
• harrow;
• differential;
• cultivator cutters;
• universal hitches;
• trolleys;
• lugs;
• plow;
• weights;
• digger;
• plower

Any walk-behind tractor of the Ugra line or other lines of motor vehicles from the Kaluga manufacturer can be connected and successfully work not only with domestic factory-made attachments, but also with products from foreign manufacturers. Thanks to the efforts of craftsmen farmers, some models are equipped with homemade implements, both mounted and trailed, however, in order to extend the service life of walk-behind tractors, the manufacturer does not recommend using homemade implements.

Engine and transmission.

Gasoline engine Lifan (Lifan) 168F-2A with a power of 6.5 hp, four-stroke, single-cylinder, with a displacement of 196 cubic meters. cm, with cast iron cylinder liner, forced air cooling, manual starter. The power unit is produced by a well-known Chinese manufacturer. The Lifan 168F-2A engine has proven itself to be reliable, unpretentious, economical and has sufficient power to perform many types of work.

A significant increase in the reliability and smooth operation of the gearbox and cross-axle gearbox has been achieved through the use of a gear mechanism, and a clutch made of metal-ceramic discs has a longer service life compared to a belt clutch. Other problems inherent in V-belt drives are also absent in the Ugra series. The gearbox has 3 forward and 1 reverse speeds.

Attachments for the Ugra walk-behind tractor

Another important advantage of the Ugra walk-behind tractor is a large number of various attachments. Today the original attachments are available for sale:

• potato planter;
• plow;
• weights;
• coupling devices;
• walk-behind brush;
• cutter-cultivator;
• tiller-cultivator;
• hiller;
• harrow;
• heavy single-axle cargo trolley;
• walk-behind shovel;
• lugs;
• differential;
• digger;
• rotary snow blower;
• cutter-cultivator.

All of the above equipment can be installed on a walk-behind tractor with minimal time. Since there is no need to make any structural changes to the structure of the walk-behind tractor itself. Initially, the attachment is equipped with everything necessary for installation on the Ugra walk-behind tractor. That is why the optimal solution is to purchase and subsequently use original attachments.

What spare parts do they offer?

You can purchase any spare parts for the NBM 1 walk-behind tractor and other models.

In assortment:

• intermediate shaft for walk-behind tractor
• gas lever
• engine adapters
• steering wheel handle
• extension cords
• gear shafts for walk-behind tractors
• bumper
• Transmission
• input shaft for walk-behind tractor
• wheels

Among all the names, it is important to identify high-quality products that correspond to the model of equipment. After all, spare parts for the engine for the Ugra walk-behind tractor may differ from those for the Neva model. Although, some manufacturers produce universal products. They are suitable for most equipment models. At the same time, its performance will be significantly improved.

Ugra walk-behind tractor characteristics

Motoblocks of the Ugra series have been produced since 2009. Gear reducer, clutch made of metal-ceramic discs, manual gearbox.

In combination with attachments, it can perform a wide range of work: cultivate the soil, mow, spray, water, dig and plant potatoes, transport cargo, remove snow. It has two power take-off shafts, which allows you to connect a wide range of additional attachments, in addition to classic mowers and snow blowers: a circular saw, a feed crusher, a water pump, an earth drill and others. The steering column is easily adjustable in vertical and horizontal planes and has vibration protection. Turning the steering wheel in a horizontal plane allows you to avoid “trampling” the soil during cultivation.

The Ugra walk-behind tractor complies with European safety standards: the control system allows you to stop the unit instantly and safely.

Motoblock Ugra NMB-1N7

The Ugra NMB-1N7 walk-behind tractor is a development of a Kaluga motorcycle, a device belonging to the class of heavy equipment. Using this unit, you can perform many agricultural operations in your summer cottage or garden, including plowing, watering, and cutting grass.

With attachments, this unit makes it easy to clear the site from snow or fallen leaves, thus, the operation of the Ugra NMB-1N7 is possible throughout the year.

The Ugra NMB-1N7 is equipped with a Lifan engine with a power of 6.5 hp (4.8 kW). The unit is equipped with a metal fuel tank with a capacity of 3.6 liters.

The device’s performance is designed for processing large land areas with an area of ​​up to 4 thousand sq.m.

Advantages of Ugra NMB-1N7

Let's take a closer look at the main advantages of this model:

• reliability and durability, confirmed by good reviews from owners;
• the presence of two power take-off shafts (this feature allows you to connect various mounted and trailed equipment to the walk-behind tractor, including rarely used ones, for example, a feed crusher, pump, mower);
• powerful Chinese factory-made engine - Lifan (Lifan 168F-2A, 6.5 hp);
• moderate noise level;
• easy starting from a place;
• instant shutdown function when switching to “STOP” mode;
• reduction gear;
• gearbox;
• compliance of this model and the entire Ugra model line with European safety standards;
• Ugra walk-behind tractors work with a wide range of additional equipment, both trailed and mounted. Installation of foreign attachments is allowed if the dimensions of the fasteners match and the necessary couplings are available; clutch material - cermet discs;
• high traction force (as a result - higher power of the walk-behind tractor when driving with a load or on dense soil);
• there are no drive V-belts, which simplifies maintenance;
• four operating modes (3 forward gears, 1 reverse);
• the steering wheel is adjustable both horizontally and vertically;
• the walk-behind tractor can be deployed almost without leaving the spot (plants in adjacent rows are less damaged);
• the steering wheel is equipped with vibration protection;
• The weight of the walk-behind tractor with the cultivator is 91 kg, with pneumatic wheels - 90 kg. (medium weight, not the heaviest model - ease of control, maneuverability). With metal wheels, the traction force increases to 130 kg;
• pneumatic wheels give the walk-behind tractor more smoothness when moving (the force of the walk-behind tractor on such wheels reaches 100 kg);
• The manufacturer provides a guarantee for this model for 18 months.

The Ugra NMB-1N7 walk-behind tractor can perform work in the speed range from 3.5 km/h to 8.52 km/h. In reverse, the car speed is 2.2 km/h. The maximum weight for transporting cargo with a walk-behind tractor, taking into account the fully loaded trolley, is 350 kg.

If transportation is necessary, the Ugra NMB-1N7 walk-behind tractor can be disassembled and transported in the trunk of a passenger car.

The Ugra NMB-1N7 walk-behind tractor is supplied complete with two cultivator cutters, two pneumatic wheels, a hitch, a coulter, and a bracket for it.

Technical characteristics of the Ugra NMB-1N7 walk-behind tractor

Manufacturer: PJSC "CADVI" (Kaluga), Russia

Description

Snowmobile attachment CAM for walk-behind tractors MB-1, Oka, Ugra, NMB-1, Neva, Neva-2, Neva-3, Cascade, Salyut, Agat, Luch, Forza, Favorit, Tselina, Patriot Dakota, Patriot Nevada, as well as for motor cultivators Neva MK-100.

Using this attachment you will get a worthy replacement for a motorized towing vehicle, which will allow numerous fans of winter outdoor activities, hunters, fishermen, regardless of the depth of the snow, to easily reach places that are sometimes inaccessible in winter, as well as take out what they have caught while hunting or fishing. A snowmobile attachment used by rural residents can be either simply a means of transportation for two people on snowy rough terrain, or a means of transporting goods, firewood, hay, or the snow itself when cleaning the local area.

The ease of control of the snowmobile attachment CAM is ensured by the standard throttle levers, the clutch of your walk-behind tractor located on the steering wheel, which is also used to turn or turn. You can install the walk-behind tractor on the attachment yourself, which will take you no more than ten minutes.

The snowmobile attachment is completely ready for use and does not require any modifications either from the walk-behind tractor or from the attachment itself.

To use the attachment as a vehicle, it is recommended to purchase a folding drag sleigh with a seat, and for transporting cargo, a drag sleigh in the form of a flat trough.

At the moment, the snowmobile attachment is adapted to the following models of walk-behind tractors:

When ordering an attachment-set for self-adaptation, please indicate the diameter of the output shaft of your walk-behind tractor or cultivator, or, if the output shaft is hexagonal, the size of the hexagon accordingly.

The manufacturer is constantly working to adapt the attachment to walk-behind tractors and cultivators from other manufacturers.