Watering machine KO-713N-01
on the ZIL-433362 chassis, designed for year-round use for the maintenance of city roads with hard surfaces.
Easy installation of equipment allows you to equip the machine with exactly the equipment necessary to perform a certain type of work
On the KO-713N-01 machine, the drive of all working parts of the equipment is hydromechanical. The KO-713N-01 is equipped with plowing equipment that allows you to copy uneven road surfaces.
The water pump is installed behind the cab on the right side member of the chassis. The drive of the brush and water pump is independent (separate). In summer, the machine is used for washing road surfaces and washing runways. KO-713N-01 can be used for watering green spaces, as well as as an additional fire extinguishing agent.
At the request of the consumer, the KO-713N-01 machine with watering equipment is equipped with a water sprinkler to reduce dust and gas pollution in the airspace above the roadway.
In addition, the KO-713N-01 machine can be used for cleaning industrial, domestic, stormwater and other pipelines from long-term deposits of varying densities, suction of various types of materials from hard-to-reach places (mines, wells, wells, storage tanks, pits, etc. .)
Watering machine KO-713
Watering machines are combined devices installed on a truck chassis. The KO-713 series of machines has different designs, which makes it possible to use them to perform a certain type of work.
Watering machines of the KO-713 series are produced by the Mtsensk Municipal Engineering Plant.
Different designs allow these machines to be used for watering and washing roads, cleaning them with a brush, clearing roads of snow or a large layer of sand, spreading sand and reagents on road surfaces in winter.
The series of these watering machines consists of the following models:
- KO-713N-01 (the vehicle chassis is equipped with washing equipment, a brush and a dump bucket);
- KO-713N-02 (the vehicle is equipped with sand spreading equipment and a brush);
- KO-713N-03 (only washing equipment and a brush are installed on the car);
- KO-713N-04 (only watering equipment is installed on the chassis);
- KO-713N (a vehicle with maximum equipment for working equipment. Includes washing and sand-spreading equipment, a brush, and a dump bucket).
Photo of watering machine KO-713
The watering machine KO-713N-01 has the following operating parameters:
Basic chassis
| ZIL-433362 | |
| Weight of water loaded into the tank, kg | not less than 6150 |
| Technological tank capacity, dm3 | not less than 6350 |
| Road load, kg - through the front axle - through the rear axle with watering equipment | no more than 3400 8200 ± 150 |
| Overall dimensions, mm - length - width - height | 8400-9380 3000 3000 |
| Watering equipment | |
| Width of the working area, mm - when washing - when watering - when working with a brush | no more than 8500 20000 2500 |
| Specific water consumption, dm3/m2 - when washing - when watering | no more than 800 200 |
| Working water pressure, MPa | up to 1.2 |
| Operating speed range of the machine, km/h - when washing - when watering | 10-20 20-30 |
| Transport speed with water in the tank, km/h | no more than 35 |
Device
KO-713 vehicles can be installed on many trucks, but the priority ones for installing equipment are ZIL-433362 and MAZ-4380R2. The use of these trucks as a chassis for equipment ensures high mobility and speed of work.
The drive of the working units of the KO-713 machine is made from the power take-off. In addition to the specified equipment, these vehicles can be equipped with additional devices, for example, sewer cleaning equipment.
Modifications
Several dozen vehicles for various purposes were produced based on the chassis:
- cranes with a lifting capacity of up to 6.3 tons;
- watering and snow removal units;
- two-leg hydraulic lifts;
- agricultural installations for transporting feed.
KYC
Based on the chassis, the ZSK-10 feed loader was produced, which was intended for transporting dry material from the manufacturing plant to the livestock farm. The design of the installation consists of a container and a screw mechanism designed for unloading. The bunker, with a capacity of 10 m³, is made of steel sheet. Stiffening ribs are installed on the sides, increasing the strength of the unit.
The screw mechanism, consisting of 2 parts, is adjustable in height within the range of 1.9-6.5 m. The vertical section is rigidly fixed on the rear wall of the container, the rotary section can be tilted in different directions. When driving on public roads, the auger is placed on the top of the bunker. The mechanisms are driven by a power take-off gearbox located on the gearbox housing. Maximum productivity reaches 15 t/h.
KO-713
The KO-713 utility vehicle was assembled by a specialized enterprise located in Mtsensk. The plant supplied several modifications that differed in equipment. To drive additional units, power take-off from the base chassis engine is used. Behind the cabin there is a cylindrical water tank mounted on the frame side members through spacers. Filling the container is carried out through the upper neck, equipped with a lid. Steel breakwaters are installed inside, eliminating the risk of hull destruction from water hammer.
Water is sprayed through nozzles installed under the front bumper. A centrifugal pump is used to supply fluid under pressure. The attachment includes a cylindrical brush located in the central part of the chassis. When using snow removal equipment, hydraulic cylinders are installed that change the position of the tool. The control is carried out by a spool valve installed in the driver's cab.
Aerial platform
The VS-22 tower, based on the ZIL chassis, consists of two sections. The base is a triangular frame mounted on a rotating shoulder strap. The rotating part is mounted on a base equipped with hydraulic supports. To increase stability and load the rear drive axle, a ballast weight is installed. The hydraulic system is connected to a gear pump mounted on the power take-off.
The tower is controlled from remote controls located on the base and in the cargo-passenger cradle. There is a button to turn on the starter of the power unit on the lower control panel. The installation allows lifting a load weighing 250 kg to a height of up to 22 m.
Watering machine KO-713
Watering machines are combined devices installed on a truck chassis. The KO-713 series of machines has different designs, which makes it possible to use them to perform a certain type of work.
Watering machines of the KO-713 series are produced by the Mtsensk Municipal Engineering Plant.
Different designs allow these machines to be used for watering and washing roads, cleaning them with a brush, clearing roads of snow or a large layer of sand, spreading sand and reagents on road surfaces in winter.
The series of these watering machines consists of the following models:
- KO-713N-01 (the vehicle chassis is equipped with washing equipment, a brush and a dump bucket);
- KO-713N-02 (the vehicle is equipped with sand spreading equipment and a brush);
- KO-713N-03 (only washing equipment and a brush are installed on the car);
- KO-713N-04 (only watering equipment is installed on the chassis);
- KO-713N (a vehicle with maximum equipment for working equipment. Includes washing and sand-spreading equipment, a brush, and a dump bucket).
Photo of watering machine KO-713
Technical characteristics of KO-713N-03 on ZIL-433362 chassis
| Wheel formula | 4x2 | |
| Basic chassis | ZIL 433362 | |
| Tank capacity, dm3 | 6150 | |
| Width of working area when washing, m | 8,5 | |
| Width of the working area when watering, m | 20,0 | |
| Width of working area for water irrigation, m | 4,0 | |
| Width of the working area when working with a brush, m | 2,5 | |
| Pressure created by the pump, MPa | up to 1.2 | |
| Diameter of pipelines to be cleaned, mm | 50 ∼ 300 | |
| Pipeline length cleaned from one installation, m | 30 | |
| Overall dimensions, mm | length with watering equipment | 8400 |
| width | 3050 | |
Advantages of municipal combined machines of the KO-713N series:
— ease of use and cleanliness in the driver’s cabin due to the removal of hydraulic equipment outside the cabin; — control of the working parts of the machines (lifting the plow and brush, turning the plow, turning on the spreading disc), transfer case and gearbox from the remote control in the driver’s cab; — regulation of the width of the road surface by changing the position of the spreading disc in height relative to the road and its rotation speed; — the ability to unload sand from the body, bypassing the spreading disc; — location of the brush drive in a closed crankcase in an “oil bath” and regulation of chain tension without opening the crankcase; — the location of the water pump in the interbase space increases the vehicle clearance and ensures the safety of the pump. — the visor and protective grille of a new design prevent technological materials from entering the cabin and machine components when loading the body; — the ability to install an electronic “black box” recorder for automatic registration of operating modes of the working parts of machines during operation; — high-pressure metal hoses that comply with the European DIN standard eliminate the possibility of their rupture and oil leaks at the joints; — high-quality, multi-layer painting of all components and parts before assembly in combination with continuous welds prevents the formation of corrosion centers and ensures the reliability and durability of metal structures.
Watering machines.
Add to catalog new watering machines
combined road models based on KAMAZ, MAZ, ZIL, GAZ, Lawn Next from the best manufacturing plants from Russia and Europe of the following brands are included: KOMMASH, KDM, KO, MD, PM.
The tabular form of the catalog makes it quite easy to familiarize yourself with the technical characteristics and select the appropriate model of watering machine, which can be purchased directly from the manufacturer or its dealer, whose addresses are available on the Factories tab.
Watering machines photo.
The catalog contains photos of watering machines from well-known manufacturers from Russia and abroad.
Watering machines based on KAMAZ, MAZ, ZIL, GAZ - technical characteristics of the models.
In the table of models of watering machines based on KAMAZ, Ural, MAZ, ZIL, GAZ vehicles, combined KDM equipment for servicing elements of the road environment and road surface has been published, indicating the technical characteristics (volume of the water tank, power, fuel consumption, productivity) and the name of the manufacturer.
Thanks to the tabular form of presenting the characteristics, you can quickly select and buy a new watering machine from the manufacturer at a low price.
KDM watering machine based on KAMAZ - technical characteristics.
Watering machines KO based on ZIL, KAMAZ - technical characteristics.
Watering machines KO-713 (806, 823) based on ZIL, MAZ, KAMAZ - technical characteristics.
Road watering machine based on KAMAZ - technical characteristics.
Road watering machines MD based on KAMAZ, Ural, ZIL - technical characteristics.
Combined watering machines based on KAMAZ, MAZ, ZIL - technical characteristics.
Combined road watering machines based on KAMAZ, MAZ - technical characteristics.
KOBIT road watering machine based on KAMAZ, MAZ - technical characteristics.
Specifications
The table shows the main technical characteristics of watering machines of the KO-713 series. Moreover, the data is indicated for vehicles installed on the chassis of ZIL vehicles.
| Characteristics | Unit measurements | Indicators |
| Chassis model | type | ZIL-433362 |
| Machine length | mm | 6400-9380 |
| Width | mm | 2500-3050 |
| Height | mm | 3000 |
| Water tank capacity | l. cube | 4925-6100 |
| Sand hopper capacity | kg | 4925-6100 |
| Working area width: | ||
| - washing | m | 8,5 |
| - watering | m | 20 |
| — water irrigation | m | up to 4 |
| - ladle | m | 2,5 |
| - brush | m | 2,3 |
| - scattering of sand | m | 4-9 |
| Sand sprinkling density | g/m.q. | 100-400 |
| Pump operating pressure | MPa | 0,8 |
The overall parameters of a ZIL-based watering machine are affected by the presence or absence of one or another working equipment. In the video, the watering machine KO-713:
Buy a watering machine at the manufacturer's price.
It has become possible to buy a new watering machine based on KAMAZ, MAZ, ZIL using the online contacts of the “Special Equipment” catalog on the Internet at the manufacturer’s selling price.
The provided contact information allows you to quickly agree on the terms of direct delivery of a watering machine, including a possible discount on the manufacturer's selling price, draw up a sales contract directly without resellers, and buy an inexpensive machine selected from the catalog at a low price at the price indicated in the manufacturer's price list.
By the way, buy a used watering machine. (used used) can be found on Avito.ru.
