General purpose airborne platform
Small series flatbeds are designed for small commercial vehicles. A distinctive feature of these sides is their lightweight design. On the light series, both steel and aluminum sides can be installed. Available with two or one side panels. All sides are installed on cast, detachable hinges, and a footrest is installed on the tailgate.
| Onboard platform options: | Steel | Aluminum |
| Side material: | Steel | Aluminum |
| Side color: | Grey | not painted |
| Side height: | 485 mm. | 400 mm. |
| Platform and rack color: | Black | |
| Flooring: | Laminated plywood mesh wear-resistant | |
Table of correspondence between vehicle modification and standard dimensions of the chassis superstructure:
| Foton BJ 1093 Auman | Onboard platform |
| Dimensions without awning (mm.) | 5450x2540x485/400 |
| Dimensions with awning (mm.) | 5450x2540x2350 |
- It is possible to manufacture and install onboard platforms with modified (increased/reduced) overall dimensions within the limits permitted by OTTS. Detailed information from our specialists.
Chassis Specifications
| Chassis characteristics | Foton BJ 1093 Auman with a cabin with a “sleeping bag” |
| Wheelbase | 4300 |
| Gross weight (kg) | 10700 |
| Load capacity (kg) | 6500 |
| Vehicle's own weight (unloaded) (kg) | 4200 |
| Maximum permissible load on the front axle (kg) | 3200 |
| Maximum permissible load on rear axle (kg) | 7500 |
| Clearance | 246 |
| Number of seats | 3 |
| Wheel formula | 4×2(spark) |
| Engine | Phaser 135Ti-30 turbo |
| Number and arrangement of cylinders | 4, in-line |
| Working volume (cm3) | 3990 |
| Compression ratio | 17.5 |
| Maximum EC power: kW (hp) at rpm | 100,76 (137) |
| Maximum torque according to EC: Nm (kgm) at rpm | 460 |
| Environmental class | Euro 3 |
| Fuel | DT |
| Fuel supply system | high pressure fuel injection |
| Drive unit | Rear |
| Clutch | Single disc, dry |
| Gearbox: number of steps | 5+1 |
| Steering | |
| Type | Power steering |
| Brake system | |
| Type | pneumatic dual-circuit with division into circuits along the axes with ABS |
| Front brakes: mm | Drum brakes |
| Rear brakes: mm | Drum brakes |
| Suspension | |
| Front | Dependent, leaf spring, with telescopic hydraulic shock absorbers |
| Rear | Dependent, leaf spring, with telescopic hydraulic shock absorbers |
| Wheels | |
| Tires | 8.25 x R16 |
| Total information | |
| Maximum elevation angle, % | 22 |
| Fuel tank capacity (L) | 120 |
| Maximum speed (km/h) | 95 |
| Dimensions, mm | |
| Wheelbase | 4300 |
| Length | 7900 |
| Width | 2330 |
| Front track | 1810 |
| Rear track | 1600 |
| Height (no load) | 2600 |
| Mounting length | 5045 |
| Fuel consumption, l/100 km | 18 |
Manual Foton Auman BJ 1093 (3/5/STX/ETX/H2) 2012 - page 1
Truck Foton Auman BJ 1093 (series 3 / 5 / STX / ETX / N 2) - operating manual 2012
Preface
The purpose of this Instruction Manual is to provide information about the design and technical characteristics of the product series
3 / 5 / STX / ETX/N2, on proper methods of its operation and maintenance. Please read this manual carefully before use and
service, follow its requirements and pay particular attention to the sections entitled “Attention” and “Warning”.
1 This manual covers the 3 / 5 / CTX / ETX / N 2 Series models. Due to differences in model design, some of the features, hardware, and functionality discussed below may not be included in the model you purchased.
2 Unauthorized installation or replacement of any vehicle equipment is strictly prohibited: such actions may result in damage to vehicle components and cause an emergency, especially in the event of damage to safety-related systems (electrical equipment, braking system and steering).
3 When replacing components, use only original spare parts, which can be purchased from authorized service centers.
4 Our company is not responsible for accidents or direct or indirect damage if the owner violates the instructions given in paragraphs 2 and 3.
5 Technological progress and development suggest further improvement of products of the 3 / 5 / CTX / ETX / H2 series. For this reason, there may be differences between the contents of this manual and improved products. The company reserves the right to modify the design without prior notice.
6 If, after carefully studying this manual, any questions remain, specialists from the authorized service center and after-sales service department are at your disposal. They are distinguished by responsiveness and excellent service.
7 When selling a car, give all information materials to the new owners. These materials are an integral part of the car. Beiqi Foton Motor Co., Ltd. April, 2012
Foton Auman BJ 1093. Number and nameplate
Location of chassis number and engine number
Write down the chassis and engine numbers. This information will be required when contacting FOTON dealers to repair your vehicle.
Chassis number
The chassis number (VIN) is stamped on the side surface of the right side member.
Foton Auman BJ 1093. Engine number
The engine number is stamped on the engine nameplate
Location of the vehicle nameplate
The vehicle nameplate is located on the rear support near the right cab door.
Information given on the plate:
Chassis equipment:
| Foton BJ 1093 Auman | |
| Heated rear view mirrors | + |
| Sun visor for driver and passenger | + |
| Fuel pre-filter | + |
| Steering wheel lock | + |
| Tilt steering column | + |
| Audio preparation 2 speakers + antenna, radio receiver | + |
| Interior rear view mirror | + |
| Fog lights | + |
| Windshield wipers with variable frequency operation | + |
| Fabric seat upholstery | + |
| Cab-colored front bumper | + |
| ABS anti-lock braking system | + |
| Tachometer | + |
| Seat belts | + |
| Tow hook | + |
| Power steering | + |
| Interior heater | + |
| Mountain brake | + |
| Electric windows | — |
| central locking | — |
| Wood-look interior inserts | — |
| Additional floor insulation | + |
| Roof fairing (spoiler) | + |
| Sleeping area | + |
| Power take-off | + |
| Wheel chocks (2 pcs.) | — |
Manual Foton Auman BJ 1093 (3/5/STX/ETX/H2) 2012 - page 4
Foton Auman BJ 1093. Combination switch
The combination switch handle contains the turn signal switch, headlight switch, headlight dimmer and headlight flasher switch.
The combination switch handle is located to the left of the steering column.
Turn signal switch
When you move the combination switch handle in the direction of rotation, the turn signal and the corresponding indicator on the instrument panel flash. When the steering wheel returns to its original position, the shift knob automatically returns to its original center position.
Light switch
The lighting switch has two positions:
Position 1: Front and rear position lights, license plate lights and instrument lights.
Position 2: headlights.
Foton Auman BJ 1093. Headlight dimmer
When you move the dimmer handle up and down, you alternately switch to low and high beam modes. When switching to high beam mode, the corresponding instrument panel indicators light up.
Foton Auman BJ 1093. Headlight flashing switch
Each time you move the combination switch down/up, the headlights turn on/off. To signal your intention to overtake, move the lever up/down several times. Perform these steps during the day and switch between low and high beams several times at night.
The switch activates the engine retarder, which closes the flap in the exhaust manifold, increasing the braking effect.
When the switch lever is moved up, the indicator light turns on to indicate that the retarder is in working condition. The switch lever is located to the right of the steering column. When driving downhill or on a road with many traffic lights, it is recommended to use the retarder. When you press the accelerator pedal or clutch pedal, the retarder is released. When idling in preheating mode, the retarder switch must be in the “OFF” position.
It is strictly forbidden to apply the exhaust brake in neutral gear. In this case, the engine may be turned off. Do not press the accelerator and clutch pedals while the exhaust brake is applied. When you press these pedals, the retarder will be turned off. For models meeting Euro III emission standards: the engine speed required to operate the retarder must exceed a certain set value. Wiper Control Switch The wiper control switch has four gears to control the speed of the windshield wipers.
1 Shutdown
2 Intermittent mode
3 Slow
4 Fast
To avoid scratching the glass surface, do not turn on the windshield wipers if the windshield is dry. Do not turn on windshield wipers that are stuck or frozen to the windshield. Otherwise, their mechanism may be damaged.
When you move the windshield wiper control switch to the second position (“INT” (intermittent mode)), you can use this control to set the wiper interval.
Flashing Hazard Light Switch
When the handle of this switch is lifted, all turn signals will flash regardless of the position of the turn signal switch. Switching off is done by lifting the handle again.
The hazard warning switch can only be used if the vehicle poses a danger to other road users.
Dimmer switch
Turn the wheel to adjust the brightness of different types of lighting fixtures.
Rear fog light switch
Click the switch to turn on the rear fog lamp (the switch is active when one or more groups of side lights, low beam, high beam headlights and front fog lamps are turned on).
Foton Auman BJ 1093. Number and nameplate
Truck Foton Auman BJ 1093 (series 3 / 5 / STX / ETX / N 2) - operating manual 2012
Preface The purpose of this Operation Manual is to provide information about the design and technical characteristics of the 3 / 5 / CTX / ETX / H2 series products, and the proper methods for their operation and maintenance. You must read this manual thoroughly before operating and servicing, follow its instructions, and pay particular attention to the sections entitled “Attention” and “Warning”. 1 This manual covers the 3 / 5 / CTX / ETX / N 2 Series models. Due to differences in model design, some of the features, hardware, and functionality discussed below may not be included in the model you purchased. 2 Unauthorized installation or replacement of any vehicle equipment is strictly prohibited: such actions may result in damage to vehicle components and cause an emergency, especially in the event of damage to safety-related systems (electrical equipment, braking system and steering). 3 When replacing components, use only original spare parts, which can be purchased from authorized service centers. 4 Our company is not responsible for accidents, as well as direct or indirect damage if the owner violates the instructions given in paragraphs 2 and 3. 5 Technological progress and development require further improvement of products of the 3 / 5 / CTX / ETX / H2 series. For this reason, there may be differences between the contents of this manual and improved products. The company reserves the right to modify the design without prior notice. 6 If, after carefully studying this manual, any questions remain, specialists from the authorized service center and after-sales service department are at your disposal. They are distinguished by responsiveness and excellent service. 7 When selling a car, give all information materials to the new owners. These materials are an integral part of the car. Beiqi Foton Motor Co., Ltd. April, 2012
Foton Auman BJ 1093. Number and nameplate
Location of Chassis Number and Engine Number Write down the chassis and engine numbers. This information will be required when contacting FOTON dealers to repair your vehicle. Chassis number The chassis number (VIN) is stamped on the side surface of the right side member.
Foton Auman BJ 1093. Engine number
The engine number is stamped on the engine nameplate. Location of the vehicle nameplate. The vehicle nameplate is located on the rear support near the right cab door. Information given on the plate:
