Kamaz with a trailer is a popular vehicle for grain transportation

KamAZ Selkhoznik (Kolkhoznik) model 55102 is an indispensable vehicle for the period of sowing, harvesting and performing many tasks that farmers have to face. The car has established itself as a reliable, durable car with good cross-country ability. Compared to foreign analogues, it wins in cost, simplicity of design and ease of maintenance. The all-terrain vehicle is adapted for towing a two-axle trailer over rough terrain. Equipment from early years of production complies with Euro-2 environmental standards.

How many tons of grain can fit in a KamAZ with a trailer?

Such a grain carrier, for example, can transport from 12 to 20 tons of grain at a time. The unloading system in these models is especially convenient.

How many tons of wheat can fit in a KamAZ?

Considering that one KAMAZ can hold from 20 to 40 tons of grain, almost 50 thousand tons of valuable cargo are idle in a traffic jam.

How many tons can a grain truck hold?

The volume of the car body is 25 cubic meters. Load capacity 15.8 tons. Trailer body volume 30 cubic meters.

How many tons does a Kamaz with a trailer take?

KamAZ 44108 - 8850/23000 (curb weight and gross trailer weight). That is, this tractor can pull a trailer weighing 23 tons.

How much grain can be loaded into a Kamaz truck?

A cubic meter of grain weighs less than a ton. For example, the density of wheat is only 750-850 kg per cubic meter. Other agricultural crops are even easier. How much grain a KAMAZ can fit depends on the volume of the platform and load capacity: we can rent a 20-40 cubic meter dump truck and fully load it.

How many tons of garbage can fit in a Kamaz truck?

The line of KamAZ dump trucks of all types is quite wide, designed to satisfy the largest possible number of customers with different specifications. Therefore, the load capacity of the machines is in a wide range. If the minimum is 7 tons, then the maximum reaches 25.5 tons.

How many tons of asphalt can fit in a KamAZ?

Yes, there are KAMAZ dump trucks with a lifting capacity of 20 tons. We transport on public roads without overload, i.e., it turns out that the body can be loaded with about 17-18 tons of asphalt.

How much can a grain truck hold?

The new generation hopper car model 19-9549 is equipped with a chassis with an axle load of 25 tf. The capacity of the car body, increased to 120 m³, and the carrying capacity of 76 tons make it possible to guarantee the efficient transportation of lightweight grain products of a wide range.

How much does a loaded grain truck weigh?

The standard grain truck is “KAMAZ-53215” with extended sides and trailers (they are also called “KAMAZ” “agricultural trucks”). Its own weight is 8.5 tons, and the weight of the transported cargo is 11 tons, for a total of 19.5 tons. With extended sides, the weight of a loaded vehicle can be up to 32 tons.

How much does a grain wagon weigh?

Technical characteristics of grain cars model 19-970-01

How many tons does Kamaz Selkhoznik take?

The KAMAZ-45143 agricultural dump truck with double-sided unloading on both sides is the successor to the KAMAZ-55102 and is designed for transporting various bulk cargo, often agricultural, with a total weight of up to 11 tons.

How much does an empty KamAZ weigh with a trailer?

According to the manufacturer's passport data, the curb weight of the KAMAZ-5320 tractor is 7080 kg, and the curb weight of the GKB-8350 trailer is 3500 kg.

How does Kamaz 5320 stand for?

KamAZ-5320 stands for as follows: 1) KamAZ - Kama Automobile Plant; 2) 5 - a fifth class car with a gross weight of 14 to 20 tons; ... 4) 20 - car model number.

Which Kamaz is better to choose for transporting grain?

It should be noted that the KAMAZ line is most in demand in the domestic market; it occupies a large volume in the agricultural sector for grain transportation, namely 22.6%. A hit of sales of KAMAZ vehicles was the grain truck on chassis 6520-63, which provides the most economical and efficient transportation of grain.

What is the width of the Kamaz body?

As a result, ordinary people have a fairly stable idea of ​​KamAZ as a vehicle with a payload capacity of 10-12 tons and a body capacity of about 32 cubic meters. For such a KamAZ vehicle, the overall dimensions are very standardized and are about 6.7 m in length, 2.44 m in width and 2.2 m in height.

How many cubic meters of firewood does a Kamaz contain?

How many cubic meters of firewood are there in KamAZ if they are completely unprepared? A 13-ton car will fit about 4-5 cubic meters of such firewood, and not 20-26, as one might think, focusing solely on the weight of the wood. But if it is chopped firewood, without bark, then the capacity increases to 6-7 cubic meters.

How much grain can be loaded into a Kamaz truck?

For example, the density of wheat is only 750-850 kg per cubic meter. Other agricultural crops are even easier. How much grain a KAMAZ can fit depends on the volume of the platform and load capacity: we can rent a 20-40 cubic meter dump truck and fully load it.

How many tons of wheat can fit in a KamAZ?

It’s not hard to imagine what it’s like for drivers to be in the driver’s cab in the hottest sun: it’s hot there, reaching 70 degrees. Almost one and a half thousand cars are waiting in line at the port. Considering that one KAMAZ can hold from 20 to 40 tons of grain, almost 50 thousand tons of valuable cargo are idle in a traffic jam.

Which Kamaz is better to choose for transporting grain?

It should be noted that the KAMAZ line is most in demand in the domestic market; it occupies a large volume in the agricultural sector for grain transportation, namely 22.6%. A hit of sales of KAMAZ vehicles was the grain truck on chassis 6520-63, which provides the most economical and efficient transportation of grain.

How many tons of grain can fit in a KamAZ with a trailer?

It is this point that is attractive to consumers and is the most appropriate in using freight and dump trucks. Such a grain carrier, for example, can transport from 12 to 20 tons of grain at a time.

How many cubes are there in KamAZ: different materials, cubic capacity table

What is volume? This is one of the quantitative characteristics of the space occupied by a body or substance. The model range presented by KAMAZ PJSC includes a large number of modifications of dump trucks, grain carriers, concrete mixer trucks, as well as isothermal and manufactured goods vans. For each of them, the automaker indicates the carrying capacity and volume of the body or platform. Additionally, the load on each axle and the maximum permissible vehicle weight are indicated.

Determination of volume

Sometimes we don’t even think about how much a cube of this or that material weighs, for example, crushed stone or sand. However, to calculate the cost of transportation services, road carriers use an indicator that characterizes the weight of the cargo.

How many cubes of a particular material will fit in a KAMAZ truck depends on various factors. Among them the most important can be identified:

• Vehicle modification. For each model, the maximum load capacity values ​​are determined in cubic meters or tons;
• Type of material transported. Each of them has certain characteristics: density, humidity, fraction, etc. As a result, different materials will require different volumes for the same weight.

Knowing all the necessary data, you can make the calculations yourself. The table calculates the mass density of some materials that are most often transported on KAMAZ vehicles.

Sand

When transporting sand, its type is of particular importance. Most often the following are transported in the back of a KAMAZ:

• Dry sand;
• Building;
• Construction dry friable;
• Construction dry compacted;
• Career.

The bulk density of each of them varies from 1200 to 1700 kg/cubic meter. Thus, to transport 10 tons of sand, a platform with a volume of 12 to 17 cubic meters will be required.

Crushed stone

Transporting crushed stone also requires careful calculation to select the optimal truck. To do this, it is necessary to take into account the fraction of the building material. The bulk density indicator depends on it.

The following types of crushed stone are used on construction sites:

• Granite fraction from 20 to 250 mm. Its density will vary from 1370 to 1400 kg per cubic meter;
• Limestone fraction from 10 to 70 mm. The bulk density of such building materials varies from 1250 to 1330 kg/cubic meter;
• Crushed gravel offers a wide range of fractions. Its bulk density will be from 1600 to 1730 kilograms per cubic meter;
• Slag with a density of 800 kg/m3;
• Expanded clay fraction from 5 to 40 mm. For it, it is necessary to select a dump truck based on a density from 210 kg per cubic meter to 450;
• Secondary, which is characterized by a density in the range of 1200 - 3000 kg/cubic meter.

Land for the plot

In addition to building materials, KAMAZ trucks are used to transport land for summer cottages. This need arises when carrying out work on landscaping a personal or local area or registering a land plot. As with other materials, in this case the maximum volume of transported cargo depends on its density. On average, one KAMAZ can deliver from 5 to 7 tons of earth to your site.

Firewood

Thanks to the design features of the platform, KAMAZ is perfectly suited for transporting timber. Depending on the modification of the KAMAZ dump truck, one vehicle can load from 25 to 45 cubic meters of logs.

If you use KAMAZ to transport sawn firewood, then one vehicle will be able to transport from 5 to 7 cubic meters of logs. This indicator is influenced by the shape of the cut and the option of laying firewood in the car body.

Engine

The car is equipped with a high-performance turbocharged diesel engine from the world-famous American company Cummins. Number of cylinders – 6, arrangement – ​​in-line. The table below shows the parameters of this power unit.

The engine service life specified by the manufacturer is impressive: 1,000,000 km. The power plant has proven itself to work in any weather: it starts well even in severe frosts.

The possibility of long-term operation without refueling (1,600 km) is ensured by a large-capacity fuel tank of 500 liters. The KamAZ 65117 is equipped with a modernized engine that uses Euro 5 diesel fuel.

Let's talk about the speed capabilities and fuel consumption per 100 km of KamAZ 65117:

• highest speed – 100 km/h;
• acceleration to 60 km/h – 45 seconds;
• braking distance at 60 km/h – 36.7 m;
• fuel consumption – 27 l.

Such fuel consumption is economical, according to automotive industry experts, compared to fuel costs for other trucks in this class.

Kamaz with a trailer is a popular vehicle for grain transportation

For any state, harvesting without loss is a strategic task. Where can the most significant grain losses occur? The first is on the field, directly during direct combining. The second is when transporting grain from the field to primary storage points or storage sites. In this case, all responsibility for the safety of the cargo rests with the vehicle owners, who are obliged to deliver the product without loss and with all quality characteristics. The Kamaz grain truck with a trailer is most in demand and recommended for these purposes.

As you know, grain is transported according to certain rules and in compliance with specific requirements. They are regulated by supervisory organizations, and they all boil down to one thing:

Agricultural producers who have invested a lot of effort in growing grain crops are interested in delivering the harvested crop to the buyer in the quantity in which it was harvested. And since grain transportation over short distances within the region is carried out by specialized trucks, in particular a Kamaz grain truck with a trailer, it must be equipped with all protective equipment so that losses during delivery and transportation are minimal or absent altogether.

Use of special vehicles

Today, objectively, agricultural enterprises can and actively use freight transport for their purposes. Many farms independently purchase specialized equipment for transporting grain from the field to their temporary storage sites for harvested products. Strong farms have their own large fleet of vehicles and, with successful commercial activity, increase the number of units from year to year. As a rule, they purchase well-known models of trucks and dump trucks, which are called “agricultural dump truck”. Several such models are presented by the Kama Automobile Plant, which specializes in the production of specialized products.

Flatbed grain truck

Among them is an onboard grain carrier with a platform length of 7260 mm and a volume of 30 m3. This model ensures the safety of the transported cargo with a special canopy. Such models provide for the installation of a towing coupling device. It is this point that is attractive to consumers and is the most appropriate in using freight and dump trucks. Such a grain carrier, for example, can transport from 12 to 20 tons of grain at a time. The unloading system in these models is especially convenient. It does not require additional effort from maintenance personnel and operates automatically. The very use of road trains is effective, since it exceeds the capacity of conventional flatbed trucks and their use is more economical. In addition, the car is equipped with a comfortable cabin with a sleeping place. And the models are supplied to form road trains and are equipped with trailers.

Models of grain trucks

Among the modern models recommended for purchase and then operation in farms or specialized agricultural enterprises is the 63731 agricultural dump truck on chassis 65115. This is a powerful machine with a 280 hp engine, a side height of 1800 mm, and a length of 6200 mm. The uniqueness of the body is that it can be unloaded on 3 sides. For this purpose, the model is equipped with 2 hydraulic cylinders. This model is especially popular among specialists, since its effective operation is obvious when transporting bulk cargo or grain. Such models have become widespread for several reasons, the main one of which is their enormous technical potential. Also, they are in demand due to the fact that they are designed in such a way that local conditions are taken into account as much as possible. In addition, there may be several models based on 63731; taking into account the wishes of the customer, they can be modified, modernized and brought into line with the wishes and preferences of the buyer.

Modifications of KamAZ 65117

The production of the truck by a domestic manufacturer means its excellent adaptation to the difficult Russian conditions. In addition, KamAZ produces modifications suitable for the temperature conditions of different regions:

1. Option with the letter "U". The machine is used in areas with normal, temperate climate. Operating temperature: -45 – +40°C, air humidity – up to 75%.
2. Modification “T” is intended for the southern regions. Cars in this group can withstand temperatures from minus 10 to plus 45 degrees and relative humidity up to 80%.
3. The special version of KamAZ 65117 can be operated at critical temperatures = from -45 to +50°C.

The vehicle functions normally at altitudes up to 3,000 m above sea level. The Kama Automobile Plant produces several types of body add-ons. Let's take a closer look at these modifications.

Flatbed truck for grain transportation

Here are brief technical characteristics of the KamAZ 65117 grain carrier:

• spatial volume of the body – 31 m3;
• final drive gear ratio parameter – 5.94;
• Agricultural products are protected from bad weather and dust by a cover made in the form of a canopy.

KamAZ 65117-6010-23

The working volume of the cargo space is 46.6 m3, the gear ratio is 5.94. The transported cargo is securely covered by a thick awning stretched over the frame of the car. This model uses Euro 4 fuel thanks to the AdBlue exhaust gas neutralization system.

Those. The characteristics of KamAZ 65117-6052-23 are as follows:

• platform volume for cargo – 36.5 m3;
• gear ratio – 5.43;
• The model is also equipped with an additional CO2 neutralization system – AdBlue.

On board you can install a frame with a rubberized awning.