Universal loader Amkodor 320, Amkodor 320E

The Amkodor 320 loader is a universal technical tool designed to perform a variety of operations. The popularity of this model in all areas of activity was brought about by increased structural strength characteristics and advanced design developments. Among similar types of equipment, Amkodor 320 stands out for its reliability of mechanical connections and ability to withstand heavy loads.

A special mechanical device allows you to change working parts within 2-3 minutes. The operator only has to leave the cab to install the locking pins and connect the quick-release hydraulic couplings. Ease of use of loading devices is achieved due to the parallelogram type of their design. In the standard version, the loader is equipped with only a bucket. Other quick-change organs will have to be ordered additionally.

Modifications

The list of modifications includes three variants of the loader: Amkodor 320 – with the Belarusian diesel engine MMZ D-245; Amkodor 320E - with a more environmentally friendly German diesel engine Deutz TD 2012 L04 2Vm, oriented for operation in urban areas; Amkodor 320SE - with a Deutz engine and a more modern cabin design (it has smooth rounded contours).

Amkodor 320 SE

Design Features

The basis of the Amkodor 320 model loaders is an articulated frame of a classic layout. In all versions, the cabin receives panoramic glazing and a wide door on the left side.

Ease of use of loading devices is achieved due to the parallelogram type of their design. The parallelogram diagram of loading equipment is especially convenient when performing utility work on lifting and moving all kinds of cargo (bulk and piece), since it ensures their safety well.

Amkodor 320 loaders are equipped with a hydraulic displacement transmission with software based on Danish adjustable hydraulic machines. The beam frames of the cabins comply with current safety requirements (protection against rollovers / against falling heavy objects: FOPS / ROPS). The use of a special “Sadef” profile made it possible to significantly reduce the number of welds.

A special mechanical device makes it easy to change working parts within minutes. The operator only needs to leave the cab to install the locking pins and connect the quick-release hydraulic couplings. In its basic version, the Amkodor 320 loader is equipped only with a bucket. Other quick-change parts must, if necessary, be ordered and purchased additionally. The manufacturer provides the possibility of aggregating this special equipment with various replaceable working equipment - load forks; roll grippers; forks with grip; rotating crane booms; grain ladles, etc.

In cramped conditions, these special vehicles feel confident because they have excellent maneuverability. They perform simple loading operations quite quickly and with very moderate fuel costs.

Video

Amkodor 320 is a compact multifunctional machine that is widely used in river and sea ports, construction, warehouses, agriculture and public utilities. The model was developed on the basis of the Belarus tractor. In cramped conditions, special equipment feels ideal because it has good maneuverability.

The Amkodor 320 has many advantages over other machines. The model cannot cope with heavy loads, but it will perform simple operations quickly and with minimal fuel costs. The loader appeared on the market relatively recently, but soon became widespread. In the Amkodor 320, the manufacturer used foreign equipment, which improved the technical characteristics, interior and exterior.

Among the design features of the model, the following should be highlighted:

• powerful diesel engine with increased environmental friendliness;
• hydrostatic transmission with software based on adjustable hydraulic machines from Sauer-Danfoss. Its use has made it possible to significantly reduce the work cycle and ensure good maneuverability;
• a new steering column and an adjustable seat, which made working on the Amkodor 320 as comfortable as possible. According to this indicator, the loader is on a par with global brands;
• a new bucket 320.45.01.000-B, which replaced the bucket 320.45.01.000-B;
• improved operator cabin with increased sound insulation and beam frame.

Amkodor 320 is a multifunctional assistant for any industry, characterized by significant productivity and low repair and maintenance costs.

Loader engines Amkodor 320

The Amkodor 320 loader is equipped with a D-245.43S2 diesel engine produced by the Minsk Motor Plant. This is a four-cylinder engine with a displacement of 4.75 liters, equipped with turbocharging, intercooling of charge air and a direct diesel fuel injection system. The rated power of the D-245.43S2 is 62 kW (84 horsepower) at 1800 rpm.

On the Amkodor 320E and Amkodor 320SE modifications, the Belarusian manufacturer uses the German Deutz TD 2012 L04 2Vm diesel engine. This option, of environmental class Stage IIIA, is intended for use in the public utilities of large cities, where increased demands are placed on the environmental friendliness of special equipment.

Deutz TD 2012 L04 2Vm

Diesel fuel consumption by both versions of the loader engine is approximately the same, and depends on the type of operation of the loader. During the movement and loading of soil, about 5.5 liters of diesel fuel per hour are burned; during soil leveling - approximately 7 liters per hour; transport mode, at higher speeds, requires approximately 8 liters per hour. The fuel tank capacity of this loader is 170 liters of diesel fuel.

Engine

Amkodor 320 is equipped with two types of engines. The most widespread modifications are those with the D-245.43 S2 diesel unit. The power plant has the following characteristics:

• rated power – 62 (84) kW (hp);
• rotation speed – 1800 rpm.

The “D-245.43 S2” unit has a device that allows starting at sub-zero temperatures (down to -20 degrees). The engine complies with the Euro-2 standard and is characterized by minimal emissions of harmful substances into the atmosphere.

again, the Amkodor 320 is equipped with a foreign unit of the Deutz TD 2012 L04 model with increased reliability and fuel efficiency. This engine is rated at 60 (82) kW (hp) and is Stage IIIA rated.

Transmission Amkodor 320

The Amkodor 320 special vehicles use a closed-loop hydraulic displacement transmission (Denmark) with electronic control, regulated pump and hydraulic motor. The type of hydraulic system for loading equipment and steering is two-pump, with one pump for loading equipment and a separate steering pump. The hydraulic valve type is three-section (4-section on the Amkodor 320CE version), with direct mechanical control.

The drive axles are also installed from well-known European ones or “Dana” (Italy) - with self-locking limited slip differentials and multi-disc wet brakes. This ensures continuously variable gear changes and changes in speed, good ride comfort and high cross-country ability. In operating mode, the machine is braked due to the hydraulic volume transmission circuit.

Series overview

Universal loaders AMKODOR 320 and AMKODOR 320E are compact multi-purpose machines designed for use in construction, public utilities and agriculture, in sea and river ports, in warehouses where maneuverability is required in cramped conditions.

AMKODOR 320E is equipped with a diesel engine from Deutz (Germany) of environmental class Stage IIIA and is indispensable in the public utilities of megacities, where increased environmental requirements are imposed.

The machines are equipped with an electronically controlled hydrostatic transmission from Sauer-Danfoss (Denmark), drive axles from Carraro (Italy) or Dana (Italy) with self-locking limited slip differentials and multi-disc brakes in “oil”, which ensures stepless change in speed and smooth operation and high cross-country ability. Combined with a ±40° articulated frame and a spacious cab with good visibility, this ensures efficient operation in tight spaces.

A mechanical device for quickly changing working parts allows them to be replaced within 2-3 minutes. The operator only needs to exit the cab to install the locking pins and connect several quick-release hydraulic couplings.

In the basic version, the loaders are equipped with a bucket; all other quick-change working parts are ordered additionally. At the request of the customer, it is possible to adapt the working bodies of specialized manufacturers.

Work equipment controls

To manipulate the working equipment, two hydraulic joysticks are installed in the cab. One of them is universal, which controls the boom and the bucket. It is equipped with a machine reverse switch and two electric buttons to control the third hydraulic function. The second joystick is three-position, with locking for the fourth hydraulic function. For example, to drive brushes and other active quick-change working parts that are needed for one or another job.

The hydraulic cycle time is: lifting – 4.5 seconds, unloading – 1.6 seconds, lowering – 3.4 seconds.

Technical specifications in numbers

• The length of the loader in the transport position of the bucket is 6 m.
• Wheelbase - 2.3 m (2.4 m for the Amkodor 320SE modification).
• The width of the wheels and bucket is 2 and 2.1 m, respectively.
• Cabin height – 2.8 m.
• Operating weight – 6.35 tons.
• Load capacity – 2 tons.
• Designation of the main bucket – 320.45.01.000-02-B.
• The nominal capacity of the bucket is 1.1 m3.
• The width of the cutting edge of the bucket is 2.1 m.
• The reach of the bucket edge is 0.88 m.
• Breakout force – 40 kN.
• Unloading height – 2.6 m.
• The maximum unloading height of the bucket along the cutting edge at an unloading angle of 45 degrees is no less than 2.55 m.
• Static tipping load in folded (±40°) position – 40 kN.
• The turning radius along the outer edge of the bucket in the transport position is 4.8 m.
• Maximum speed – working: 7.8 km/h, transport: 29 km/h (Amkodor 320); working: 6.5 km/h, transport: 20 km/h.
• Ground clearance – 380 mm.
• Track width – 1.5 m.
• Tires – 16.0-20.

Specifications

Amkodor 320 is equipped with two types of engines. The most widespread modifications are those with the D-245.43 S2 diesel unit. The power plant has the following characteristics: Engine

• rated power – 62 (84) kW (hp);
• rotation speed – 1800 rpm.

The “D-245.43 S2” unit has a device that allows starting at sub-zero temperatures (down to -20 degrees). The engine complies with the Euro-2 standard and is characterized by minimal emissions of harmful substances into the atmosphere.

The Amkodor 320 is also equipped with a foreign unit of the Deutz TD 2012 L04 model with increased reliability and fuel efficiency. This engine is rated at 60 (82) kW (hp) and is Stage IIIA rated.

Fuel consumption

Due to the hydraulic lift type transmission with a system for reading program tasks, the fuel consumption rate in the Amkodor 320 was significantly reduced. Fuel consumption depends on the type of loader operation:

• moving and loading soil – 5.5 l/hour;
• ground leveling – 6.8 l/hour;
• transport mode – 8.1 l/hour. The model's fuel tank capacity is 170 liters.

Loader cabin Amkodor 320

The interior of the loader cabin does not shine, so to speak, with “foreign gloss”, but is finished with good quality and high-quality plastic, and in terms of its ergonomics it is close to its European “classmates”, offering a thoughtful layout, a fairly high level of equipment and a fairly comfortable adjustable driver’s seat. The steering column is also adjustable.

The assembly is very neat; attention is drawn to the careful fit of the interior equipment parts. In front of the steering wheel there is a dashboard with the main instruments of modern design and construction. In the large circles of the instruments there are indicator lamps that turn on in certain modes. Under standard conditions, they are not used and do not distract attention. An electronic hour meter is also installed here.

The basic package of the Amkodor 320SE version includes not only a heater, but also an air conditioner, a 12/24V switch, a socket for connecting a mobile phone, MP3 player and other gadgets.

Access to the interior of the loader cabin is facilitated by wide and massive steps that prevent you from slipping, as well as a long handrail. The loader cabin has a durable beam frame that provides guaranteed protection against falling heavy objects or overturning (ROPS/FOPS protection systems). The cabin is equipped with two rear-view mirrors, which, coupled with extensive glazing made of frameless glass, improve visibility. Windshield washers and wipers are provided on the rear and front windows. Working in low light conditions on the Amkodor 320 is easy, thanks to the four headlights that are installed in the front. The cabin has space for a first aid kit and a fire extinguisher.

Device

The main feature of the loader is the hydrostatic transmission, supplemented with software. Through it, smooth stepless gear shifting is achieved over a wide range. In operating mode, the machine is braked by the hydraulic transmission circuit. Wheel brakes do not take part in the process. The brake system is activated only in emergency situations and transport mode. This significantly increases the service life of the drive axles. Hydraulic steering drives the articulated frame.

Amkodor 320 is distinguished by increased cross-country ability, which is achieved through the use of drive axles with self-locking differentials made in Italy (Carraro). Decent ground clearance and wide-profile tires also contribute to this.

When developing the loader, special attention was paid to the cabin. Unlike previous models of this brand, it has a more modern design. Access to the salon is facilitated by wide, massive steps, which are difficult to slip on, and a long handrail. The consumer will be pleased not only with the appearance of the cabin, in the design of which a special SADEF profile was used, which reduced the number of welds. The interior of the loader is distinguished by neat assembly and improved design. Better and more beautiful plastic has appeared here, creating a cozy atmosphere.

In front of the steering wheel there is a panel with the main instruments of a more modern design. In the large circles of the instruments there are warning lamps that turn on in certain modes. Under standard conditions, they are not involved and do not distract attention. An electronic hour meter is also installed here.

The equipment cab has a beam frame that provides maximum protection when various objects fall or roll over (ROPS/FOPS protection systems). The cabin is equipped with two rear-view mirrors, which, coupled with extensive glazing made of frameless glass, improve visibility. Windshield washers and wipers are provided on the rear and front windows. Working in low light conditions on the Amkodor 320 has become easier thanks to four headlights installed at the front. The cabin has space for a first aid kit and a fire extinguisher.

Maintaining the desired temperature in the cabin is ensured by opening the side windows and doors. In winter, the operator can turn on the heater. Vibration in the loader cabin is practically not felt, since the cabin is mounted on four vertical vibration isolators.

The basic loader bucket has a capacity of 0.95 cubic meters. The manufacturer provides the possibility of aggregating equipment with various replaceable equipment:

• load forks;
• roll grip;
• forks with grip;
• load forks.

Reviews about the Amkodor 320 model are extremely positive. Loader owners especially praise the plastic cabin, which makes a pleasant impression due to its smooth surfaces. The technology does not have unnecessary warning lights and switches, which in some cars “clutter up” the dashboard. The steering wheel turns without much effort. True, the Amkodor 320 loader also has disadvantages. The model’s actuators react too sharply to the movement of the control handles.

The compact loader is suitable for a variety of jobs and attracts with its affordability and excellent quality.

Attachments

Standard bucket 320.45.01.000-B - has a mass of 350 kg, a nominal capacity of 1.1 m³, a specific gravity of the loaded material of 1.82 t/m³, a width of 2.1 m.

The double-jaw bucket 320.45.03.000-A has a nominal capacity of 0.85 m³, and a specific gravity of the loaded material of 2.35 t/m³. The width of this version of the bucket is 2.17 m. The unloading height (at an unloading angle of 43°) is 2.69 m; bucket reach (at an unloading angle of 43°) – 0.86 m. The minimum turning radius along the outer dimensions in the transport position is 4.9 m. The overall length of the loader with such a bucket in the transport position is 5.97 m. The weight of the double-jaw bucket is 480 kg .

The grain bucket 320.45.02.000 has a nominal capacity of 1.9 m³, and the specific gravity of the loaded material is 0.71 t/m³. The width of this version of the bucket is 2.3 m. Unloading height (at a dumping angle of 25°) is 2.75 m. Dumping height (at a dumping angle of 45°) is 2.35 m. Bucket reach (at a dumping angle of 45°) is 1.25 m. The minimum turning radius along the outer dimensions in the transport position is 4.9 m. The overall length of the loader with such a bucket in the transport position is 6.25 m. The weight of the grain bucket is 425 kg.

Rotating crane boom 320.45.71.000 – has a nominal lifting capacity of 1.26 t – with a minimum hook reach, and 0.93 t – with a maximum reach. The maximum lifting height of the hook is 4 m. The lifting height of the hook with the boom in a horizontal position is 1.8 m. The minimum turning radius along the outer dimensions in the transport position is 4.7 m. The overall length of the special vehicle with the boom in the transport position is 7.6 m. The mass of the crane boom is 400 kilograms.

Cargo hook 527.56.00.000 has a lifting capacity of 2 tons. The highest lifting height of the hook, with a maximum lift of the boom - 3.42 m. The highest lifting height of the hook with a horizontal position of the boom - 1.65 m. Reach of the hook: with a maximum lift - 0.9 m, with a horizontal position of the boom - 1.75 m The minimum turning radius along the outer dimensions in the transport position is 4.3 m. The overall length of the machine in the transport position is 5.79 m. The weight of the hook equipment is 125 kg.

V-shaped snow blade 320.45.63.000 – with a hydraulic blade rotation system, blade wing rotation angle ±30 degrees. The minimum turning radius along the outer dimensions in the transport position is 5 meters. Blade height – 835 mm. Its weight is 720 kg. The width of the strip to be cleared is up to 2.72 m. The overall length of the machine with a blade in transport position is 6.06 m.

Roll gripper 527.53.00.000 - B1 - has a load capacity of 1.2 tons. The roll diameter can be 850 - 1750 mm. Width – 1360 mm. The roll unloading height is 3.25 m. The reach with the gripper arms in a horizontal position at the maximum lifting height is 1800 mm. The minimum turning radius along the outer dimensions in the transport position is 4.5 m. The overall length of the loader with a gripper in the transport position is 6.81 m. The gripper weight is 340 kg.

Universal forks 527.55.00.000 have a load capacity of 1.3 tons and a weight of 600 kg. Fork width – 2.15 m. Unloading height – 2.45 m. Fork pin reach from the edge of the front wheel is 0.98 m. Minimum turning radius along the outer dimensions in transport position – 4.8 m. Overall length of the machine with forks in transport position – 6.2 m.

Forks with gripper 527.54.00.000 have a load capacity of 1.5 tons. The width is 2.09 m. The fork pin reach from the edge of the front wheel at the maximum unloading height and at an unloading angle of 45° is 0.98 m. The minimum turning radius along the outer dimensions is 4 .8 m. Overall length of the machine in transport position – 6.2 m. Weight – 560 kg.

Load forks 525.58.00.000 – with a load capacity of 2 tons. The width along the support legs ranges from 270 to 990 mm. The step of moving the paws is 40 mm. Unloading height – 2.9 m. Reach along the back of the forks – 450 mm. The minimum turning radius along the outer dimensions in the transport position is 4.5 m. The overall length of the loader in the transport position is 6.63 m. Weight is 300 kg.

The rotary blade 320.45.65.000 has a mass of 540 kilograms, width: 2.5 m (when positioned straight), 2.17 m (when positioned “rotated by ±30°”). The minimum turning radius along the outer dimensions in the transport position is 4.8 m. Blade height is 0.75 m. Turning angle: ±30 degrees. The overall length of the machine in transport position is 5.92 m. Weight: 540 kg.

Installing a snow plow “Pronar” 320.45.62.000 provides a width of the cleared strip of 2.53 m. The height of the blade is 0.835 m. Its weight is 640 kg. The width of the blade in the transport position is 2.46 m. ​​The minimum turning radius along the outer dimensions in the transport position is 5.2 m. The overall length of the machine in the transport position is 6.07 m.

Installation of sweeping and cleaning equipment “Tuchel” 320.45.82.000 The width of the strip to be cleaned (with the side broom extended) is 2.4 m. The diameter of the main brush is 0.6 m. The weight of the installation is 715 kg. The minimum turning radius along the outer dimensions in the transport position is 5.6 m. The overall length of the machine in the transport position is 7.59 m.

Installation of sweeping and cleaning equipment "Holms" 320.45.83.000 The width of the strip to be cleaned reaches: 2.5 m (brush in a straight position) and 2.215 m (brush in a 30° rotated position). The brush diameter is 700 mm. The minimum turning radius along the outer dimensions in the transport position is 5.4 m. The overall length of the special machine in the transport position is 6.92 m. The weight of the installation is 500 kg.

Reviews of the Amkodor 320 loader

Owners and operators of Amkodor 320 loaders note that in terms of quality and ease of operation, this equipment is in no way inferior to Chinese and even European analogues. The build quality is at a high level, reliability and durability in operation too. The cabin may not be as comfortable as that of the “Europeans”, but it is of decent and good quality. All controls are in their optimal places - you quickly get used to their location. Visibility is ideal, “like in an aquarium.” In some cases, complaints arise from the “original” loader seat: some find it uncomfortable and require replacement with a more comfortable one.

The D-245.43S2 engine is quite powerful, durable, and unpretentious to the quality of diesel fuel. Starts well in any weather. The only disadvantage of this motor is that it is quite noisy.

The hydraulics are of high quality - they work properly, don’t leak anywhere, and don’t cause any trouble. In general, everyone characterizes the Amkodor 320 as a good, reliable, not too expensive, very maneuverable and convenient loader.

Loader Amkodor 320

The Amkodor 320 loader is a universal technical tool designed to perform a variety of operations. The popularity of this model in all areas of activity was brought about by increased structural strength characteristics and advanced design developments. Among similar types of equipment, Amkodor 320 stands out for its reliability of mechanical connections and ability to withstand heavy loads.

A special mechanical device allows you to change working parts within 2-3 minutes. The operator only has to leave the cab to install the locking pins and connect the quick-release hydraulic couplings. Ease of use of loading devices is achieved due to the parallelogram type of their design. In the standard version, the loader is equipped with only a bucket. Other quick-change organs will have to be ordered additionally.

Amkodor 320 is a compact multifunctional machine that is widely used in river and sea ports, construction, warehouses, agriculture and public utilities. The model was developed on the basis of the Belarus tractor. In cramped conditions, the equipment feels ideal because it has good maneuverability.

The Amkodor 320 has many advantages over other machines. The model cannot cope with heavy loads, but it will perform simple operations quickly and with minimal fuel costs. The loader appeared on the market relatively recently, but soon became widespread. In the Amkodor 320, the manufacturer used foreign components, which improved the technical characteristics, interior and exterior.

Among the design features of the model, the following should be highlighted:

• powerful diesel engine with increased environmental friendliness;
• hydrostatic transmission with software based on adjustable hydraulic machines from Sauer-Danfoss. Its use has made it possible to significantly reduce the work cycle and ensure good maneuverability;
• a new steering column and an adjustable seat, which made working on the Amkodor 320 as comfortable as possible. According to this indicator, the loader is on a par with global brands;
• a new bucket 320.45.01.000-B, which replaced the bucket 320.45.01.000-B;
• improved cabin with increased sound insulation and beam frame.

Amkodor 320 is a universal assistant for any industry, characterized by high performance and low repair and maintenance costs.

Specifications

The lifting capacity of the equipment is 1800 kg with an operating weight of 6300 kg.

• length – 6015 mm;
• width – 2100 mm;
• height – 2750 mm;
• wheelbase – 2300 mm;
• ground clearance - 380 mm;
• minimum turning radius – 4700 mm;
• track – 1500 mm.

• basic bucket capacity – 0.95 cubic meters;
• cutting edge width – 2000 mm;
• maximum unloading height – 2550 mm;
• pullout force – 4000 kg;
• statistical tipping load – 3600 kg

The swing angle of the rear axle for this technique is ±8 degrees. The maximum speed of the loader is 28 km/h. The 800 mm bucket boom provides sufficient height for most loading operations.

Fuel consumption

Due to the hydraulic lift type transmission with a system for reading program tasks, the fuel consumption rate in the Amkodor 320 was significantly reduced. Fuel consumption depends on the type of loader operation:

• moving and loading soil – 5.5 l/hour;
• ground leveling – 6.8 l/hour;
• transport mode – 8.1 l/hour. The model's fuel tank capacity is 170 liters.

Engine

Amkodor 320 is equipped with two types of engines. The most widespread modifications are those with the D-245.43 S2 diesel unit. The power plant has the following characteristics:

• rated power – 62 (84) kW (hp);
• rotation speed – 1800 rpm.

The “D-245.43 S2” unit has a device that allows starting at sub-zero temperatures (down to -20 degrees). The engine complies with the Euro-2 standard and is characterized by minimal emissions of harmful substances into the atmosphere.

The Amkodor 320 is also equipped with a foreign unit of the Deutz TD 2012 L04 model with increased reliability and fuel efficiency. This engine is rated at 60 (82) kW (hp) and is Stage IIIA rated.