Hitachi ZX230LC - technical specifications, photos, videos, review

Hitachi ZAXIS 230 description

Hitachi crawler excavator weighing 23 tons

• LC – models with an extended length propeller, used on soft soils.
• LD – “straight shovel” excavators, designed to excavate soil above the support point.
• N – specimens for working with heavy and rocky materials.
• K – modifications for dismantling work, equipped with attachments.
• MT – models with high cross-country ability for working in “cluttered” areas.
• USR, US and U are representatives with a shortened, small and “zero” radius of the turntable.

Device

The basis of the technique is a central X-shaped beam, the design of which was modified in the latest modification of the model. The strength of the element has increased by 35% compared to the previous version. The top and bottom plates of the X-beam consist of monolithic channels, replacing traditional welded plates. This added reliability to this element and made it possible to lift large loads.

The Hitachi 240 excavator is a reinforced model designed for hard work in difficult conditions. Japanese engineers used several advanced solutions in the design of the equipment. In addition to strengthening the side stages of the track protection, the protection of the front section of the boom was additionally increased through the use of a high-strength steel plate. Thrust plates made of durable rubber provide maximum wear resistance and reduce the noise level of the equipment. The high-strength chassis provided good endurance. For the Japanese brand, quality has always been considered a key characteristic, which is also typical for this model.

Technical characteristics of Hitachi ZAXIS 230

Hitachi ZAXIS 230 video

Reviews of Hitachi ZAXIS 230

Hydraulic spare parts for Hitachi excavator transmission and steering hydraulic pumps, main hydraulic pumps, blade lift and tilt hydraulic cylinders, handle hydraulic cylinders, boom hydraulic cylinders, bucket hydraulic cylinders, hydraulic motors, hydraulic distributors, valves, main piston pumps, travel hydraulic motors, swing motors, hydraulic valves, pilot ( gear) pumps.

Hitachi excavator repair instructions, operation, electrical diagrams, hydraulic diagrams, control instructions, Hitachi Zaxis excavator spare parts catalog

Hitachi excavator: review of models and prices

Hitachi is a global brand specializing in the development and production of construction equipment. Today, the equipment of this manufacturer occupies almost 40% of the world market. Purchasing a Hitachi excavator means providing yourself with reliable equipment for many years, without worrying about repairing and replacing parts of the unit, even in difficult operating conditions. It is clear that problems in operation also occur with this equipment, but mostly these are one-time cases as a consequence of operating errors. No manufacturing defects were recorded in any call to service centers.

Hitachi ZAXIS 230

Hitachi crawler excavator weighing 23 tons

• Max. bucket volume 1.2 m³
• Weight 24660 tons
• Engine power 186 kW

• Max. bucket volume 1.05 m³
• Weight 18 tons
• Engine power 150 kW

• Max. bucket volume 0.8 m³
• Weight 18.5 tons
• Engine power 70 kW

• Loader bucket volume 1.8 m³
• Max. unloading height 2.8 m
• Weight 10 tons

• Max. boom radius 8200 m
• Load capacity 15 tons

• Boom length 9.5 m
• Cutting strip 2 m
• Load capacity 1040 tons

• Body volume 86 m³
• Load capacity 30.1 tons

• Body volume 92 m³
• Load capacity 32.55 tons

• Body volume 92 m³
• Load capacity 32.55 tons

• Number of pairs of bunks: 6 pcs.
• Loading height 1506 mm
• Load capacity 30.8 tons

Specifications

Overall dimensions of the Hitachi 240 excavator:

• length – 10470 mm;
• width – 2990 mm;
• height – 3010 mm;
• ground clearance – 460 mm.

The maximum height for unloading equipment is 3300 mm. The digging depth of the Hitachi ZX 240 reaches 6500 mm. The volumetric bucket (0.8-1.4 cubic meters) makes the excavator very productive. The total weight of the equipment is 23,400 kg. At the same time, the specific pressure on the ground is only 0.58 kg/sq.cm.

Hitachi ZX 240 fuel consumption

The fuel consumption rate of the Hitachi 240 is 13.8 l/hour. The volume of the fuel tank of the equipment is 380 liters.

Description

The Hitachi ZX 230 crawler excavator is a high-performance equipment designed for excavation work on unprepared soil.

Hitachi are manufactured in Japan, which guarantees excellent quality and high efficiency of work.

Long-term rental of a crawler excavator is provided on favorable terms.

• Curb weight 23 t
• Bucket volume 1 m3
• Digging depth 7.9 m
• Additional equipment: fang-ripper

Engine

The Hitachi ZX 240 is equipped with a 4-cylinder 4-stroke diesel engine Isuzu CC-6BG1T. This power plant has an electronic direct fuel injection mechanism and a water cooling system. High efficiency is achieved through optimal fuel distribution between the injectors. An electronic system with a common discharge pipeline is responsible for this process (it controls the integrated ultra-high pressure fuel pump). This also makes it possible to reduce the diesel plume and increase the power of the power plant.

Characteristics of the Isuzu CC-6BG1T engine:

• working volume – 5 l;
• rated power - 177 hp;
• rotation speed – 1800 rpm;
• torque – 637 Nm;
• traction force – 200 kN;
• cylinder diameter – 105 mm.

The unit allows you to accelerate the excavator to a speed of 5.5 km/h.

Hitachi 230 crawler excavator rental in Moscow

The Hitachi 230 crawler excavator is a product of the Japanese manufacturer HITACHI.

Crawler excavators are used primarily on large construction sites when digging pits, trenches and other various earthworks in the most difficult conditions.

The Japanese Hitachi ZX-230 crawler excavator is an ideal tool for trenching, digging pits and creating embankments. This model is one of the most popular for construction and road repair work, and is also in great demand among companies whose activities are directly related to excavation. The excavator is designed for intensive use in any conditions, its design is characterized by high strength and reliability.

With an excavator weighing just over 17 tons, a 170 horsepower engine allows the Hitachi ZX-230 to reach speeds of up to 6 kilometers per hour. The tracked chassis provides the vehicle with the necessary maneuverability and stability. The movement of soil is ensured by a bucket with a volume of one cubic meter. This model is capable of excavating soil up to a depth of 6.3 meters.

If your organization does not specialize in construction or earthmoving work, it is not at all necessary to purchase a new or used excavator to perform a one-time task that is not expected to be repeated. It would be much more reasonable and cheaper to rent a brand new Japanese-made Hitachi ZX-230 excavator from our company.

This Hitachi 230 model has a mode for increasing the lifting force, which allows you to perform the most difficult operations, for example, removing concrete pipes or formwork from the ground. It has a high speed of movement of the working equipment, which in turn increases productivity. It has the ability to attach additional equipment, thereby expanding the functionality of this excavator.

For detailed information and advice regarding the Hitachi 230 excavator, call tel. +7(495) 509-20-04.

Excavator Hitachi ZX 240

Hitachi Corporation is rightfully considered one of the leaders in the global market for special equipment.
The Japanese brand offers a wide range of different machines designed for use in construction, industry and other industries. The first bucket excavator from this company was introduced in the mid-20th century. In 1970, the corporation created a special division (Hitachi Construction Machinery), the key focus of which was the production of heavy construction equipment. In the 80s, the corporation began to cooperate with the American company John Deere, which allowed the brand to enter the American market. Hitachi products have gained great popularity here. Currently, the corporation includes over 30 enterprises located outside of Japan. Moreover, it is excavators that make up a significant part of the profit and are also popular on the Russian market. In addition to wheeled vehicles, the brand offers tracked models, so the consumer can choose the modification that is most convenient for him.

Hitachi ZAXIS 230 description

Hitachi crawler excavator weighing 23 tons

• LC – models with an extended length propeller, used on soft soils.
• LD – “straight shovel” excavators, designed to excavate soil above the support point.
• N – specimens for working with heavy and rocky materials.
• K – modifications for dismantling work, equipped with attachments.
• MT – models with high cross-country ability for working in “cluttered” areas.
• USR, US and U are representatives with a shortened, small and “zero” radius of the turntable.

Hitachi Maintenance

1. home
2. Service and repair
3. Hitachi Maintenance

Examples of maintenance for popular models of Hitachi excavators in Russia:
List of work when carrying out maintenance of an excavator

HITACHI ZX-200.

I. Maintenance (minor) is carried out after 250 engine hours

II. Maintenance (full) is carried out after 500 engine hours

III. Maintenance (intermediate) is carried out after 750 engine hours

IV. Maintenance (main) is carried out after 1000 engine hours

V. Maintenance (intermediate) is carried out after 1250 engine hours

VI. Maintenance (full) is carried out after 1500 engine hours

VII. Maintenance (intermediate) is carried out after 1750 engine hours

VIII. Maintenance (main) is carried out after 2000 engine hours

The cycle is repeated every 2000 operating hours.

* Hydraulic oil is changed on a new machine after the first 4000 m/h, then depending on what type of oil is filled (but not more often than after 1500 m/h)

List of works during excavator maintenance

HITACHI ZX-200-3/210-3

I. Maintenance (minor) is carried out after 250 engine hours

II. Maintenance (full) is carried out after 500 engine hours

III. Maintenance (minor) is carried out after 750 engine hours

IV. Maintenance (main) is carried out after 1000 engine hours

V. Maintenance (minor) is carried out after 1250 engine hours

Maintenance (full) is carried out after 1500 engine hours

VI. Maintenance (minor) is carried out after 1750 engine hours

VII. Maintenance (main) is carried out after 2000 engine hours

The cycle is repeated every 2000 operating hours.

* Hydraulic oil is changed on a new machine after the first 5000 m/h, then depending on what type of oil is filled (but not more often than after 1500 m/h)

** The coolant is changed at 4000 m/h or every 2 years, whichever occurs first.

List of works during excavator maintenance

HITACHI ZX-240-3/250-3 to Ser No. ~021314

I. Maintenance (minor) is carried out after 250 engine hours

II. Maintenance (full) is carried out after 500 engine hours

III. Maintenance (minor) is carried out after 750 engine hours

IV. Maintenance (main) is carried out after 1000 engine hours

V. Maintenance (minor) is carried out after 1250 engine hours

Maintenance (full) is carried out after 1500 engine hours

VI. Maintenance (minor) is carried out after 1750 engine hours

VII. Maintenance (main) is carried out after 2000 engine hours

The cycle is repeated every 2000 operating hours.

* Hydraulic oil is changed on a new machine after the first 5000 m/h, then depending on what type of oil is filled (but not more often than after 1500 m/h)

** The coolant is changed at 4000 m/h or every 2 years, whichever occurs first.