A scraper for removing snow from a roof with a telescopic handle is to some extent a curiosity, because... It is almost impossible to find such devices in a regular hardware store.
This tool is called: a slider for clearing snow from the roof, a special snow shovel for the roof, a roof cleaner, a reverse scraper and a rake for removing snow from the roof.
Wheeled scraper for snow removal
Snow removal in winter becomes a heavy burden for many private sector residents. During periods of heavy snowfall, it is necessary to clean the area daily, and sometimes several times a day. It takes a lot of effort and time. The snow removal process can be made easier and faster by partially mechanizing the process. So, you can replace the usual shovels and scrapers with a tool on wheels. A simple addition in the form of wheels will help you easily move heavy lumps of snow without much effort. You can buy a snow scraper on wheels or make one yourself. Good advice on choosing equipment and a detailed guide to making it can be found in our article.
Top 3 best models
The most popular models of shovels on wheels:
Engine Elektromash 901
Bucket size: 36x70 cm, length: 110 cm . The bucket shovels snow perfectly, as it has a rounded shape, is made of steel, and is strong and durable. There is a rubber edge on its bottom.
The wheels are large, swivel, and do not fall into snowdrifts. The handle can be adjusted in length. The weight of the machine is 11.4 kg. Price – 3,400 rubles. Read reviews here.
BERCHOUSE No. 44 660x330 MM
Snow engine on large wheels, U-shape. Handle, AL. "BERCHOUSE" plate. The ladle is made of plastic, its length is 22 cm . The lower part is reinforced with an aluminum strip and has stiffening ribs.
The handle is metal, in the shape of the letter P. The wheels are large, which is important when clearing snow. The total weight of the equipment is 2.23 kg. Price – 2,300 rubles.
No. 45 660x330 MM
Snow engine on large wheels, aluminum. Cherenok, AL. Plast. "BERCHOUSE". Snow shovel with curved plastic bucket . The lower part of the working surface is covered with a metal strip, designed to increase its strength.
The handle is ergonomic, in the shape of the letter D. Working with the tool does not lead to overstrain of the back muscles. Price – 2,300 rubles.
How to choose a good wheel scraper
Manufacturers of garden tools constantly surprise us with their new products. One of them can be called a wheel scraper. This type of shovel is designed for effective snow removal. Like a regular scraper, it has a large tray for collecting snow and a handle or handle. A special feature of such equipment is the wheel axle attached to the bottom of the shovel. The manufacturing material and design of such a scraper may differ for each specific model. Let's try to understand in detail the wide variety of wheel scrapers.
Which scraper is the most reliable?
The durability and ease of use of a wheel scraper largely depends on the material from which it is made:
- A plastic shovel is very light and convenient, but, unfortunately, only high-quality polymer material can withstand severe frosts. The cost of high-quality plastic shovels is quite high.
- Metal scrapers can operate successfully for even several decades, but the disadvantage of metal is the bulkiness of the structure and its large weight. Of all the metal options, scrapers made of aluminum and duralumin have proven themselves to be the best.
- It will not be possible to find wooden scrapers for sale, but many craftsmen make such equipment on their own. Its disadvantages are fragility and significant mass. It is also worth considering that wet snow tends to stick to a wooden surface.
When purchasing a scraper on wheels, you need to carefully evaluate the price-quality ratio. If the budget allocated for the purchase is strictly limited, then it is better to purchase metal equipment. There is no doubt about its quality, and the price tag of such a shovel is quite affordable. A high-quality plastic shovel will be more convenient to use, but purchasing it will cost about 2-5 thousand rubles.
Variety of models
Choosing a convenient and productive scraper engine on wheels is not so easy, because the market offers a huge number of different models. Each of them has its own advantages, disadvantages, and features.
Most often, plastic scrapers are equipped with small wheels that help move snow from the collection site to the storage site by slightly tilting the shovel. In the photo below you can see such a scraper on small wheels:
It is worth noting that such equipment will only work effectively on a flat surface with a small layer of snow, since the maneuverability of small wheels is low.
More often, domestic and foreign manufacturers offer plastic scrapers on small wheels. The lion's share of the brand value can be invested in the price of such inventory. Thus, a shovel, 80 cm wide, made of frost-resistant plastic from Fiskars will cost the buyer 4-5 thousand rubles, while similar domestically made equipment costs only 2 thousand rubles.
A large wheel scraper is sometimes called a manual bulldozer. The shape of its bucket is non-standard. It is a curved, wide surface made of metal. A wheelbase and a handle are attached to it, allowing you to maneuver the structure. Such a scraper, without much human effort, can shovel a large volume of snow to the storage site, but it will not be possible to lift the load on such a bucket.
Scrapers can be equipped with two or four wheels. The ease of use and maneuverability of a snow shovel depend on their diameter.
The design with 4 wheels has one significant drawback: the bucket is located at a certain height from the surface of the ground, which does not allow snow to be removed as cleanly as possible. The rigid four-wheel base does not allow tilting or lifting the scraper. This feature makes the scraper suitable only for working on a flat surface.
Another version of the wheel scraper was invented not so long ago in Europe. Its design provides for only one large diameter wheel. A handle is attached to its axis using a hinge. At one end of the handle there is a bucket for collecting snow, and at the other end there is a handle. You can see this design and the principle of its operation in the photo:
It is worth noting that working with such a scraper is really convenient: the large wheel has good maneuverability, and the large lever of action allows you to dump snow from the bucket with minimal effort. At first glance, the bulky design is easy to disassemble and does not take up much space during storage.
Today, many owners of private farmsteads have appreciated the advantages of snow scrapers on wheels. Working with such a tool allows you to relieve the load from the worker’s shoulders, arms and back. The weight of the snow is transferred to the wheel during operation. It is this detail that you need to pay special attention to when purchasing a scraper. Wheels must be made of durable material. Rubber wheels withstand impacts, loads and low temperatures best. Their diameter should be as large as possible, because the permeability of the structure and the ease of its use depend on this.
The scraper handle is another important point of attention. A scraper with a wide bucket should have a U-shaped handle. This will allow you to make the most efficient efforts to move the bucket, but such equipment will not allow you to lift the shovel and makes the structure less maneuverable. The U-shaped handle and T-shaped handle must have a rubberized base to hold the tool. A special non-slip coating will make work convenient and comfortable.
Read also: Champion gb226, gbr333, gbv326s, ps257 blower: characteristics, reviews
Scraper vs shovel
Compared to a shovel, the engine is a more ergonomic tool. As a rule, it has a wide bucket that copes with snow drifts over a large area. In one pass you can clear up to 70-80 cm of snowdrifts, which significantly saves time and effort. The snow layer is moved forward by the engine bucket:
When cleaning,
follow the following rule : the lighter the snow, the wider the bucket, and for wet and heavy snow with crust, you need a tool with a small strong bucket, preferably with stiffening ribs.
The engine is suitable for operation only on level areas. It is less maneuverable than a shovel. Therefore, if you need to clean a wide driveway, for example to a garage, choose an engine, and for winding narrow paths a shovel is more suitable.
The shovel usually has a single handle, sometimes with an additional handle on top. The handle of the engine is wide, U-shaped, it is comfortable to hold. At the same time, the load on the back muscles is insignificant. An engine with such a handle can be controlled by two people at once, including children and the elderly. But there are scrapers with a single handle, like a shovel.
It's easy to make a scraper
If you have no money in your wallet, and the snow is increasingly covering the yard, then it’s time to make a snow removal engine yourself. The manufacturing process of such a tool is simple and does not require special knowledge or experience. Thus, we will offer craftsmen two options for manufacturing scrapers on wheels.
Manual bulldozer
To create a manual bulldozer you will need:
- Two wheels. You can buy them or take them from an old stroller or cart.
- Sheet steel. It is preferable to use sheets with a thickness of at least 1 mm. Sheet metal can be replaced with a pipe with a diameter of 30-40 cm. It will need to be cut.
- Steel pipe, diameters 20-40 mm.
- Swivel loop.
To make a scraper similar to a manual bulldozer, in addition to materials, you need a grinder and a welding machine. For greater understanding, the scraper manufacturing process can be described in stages:
- You can make a work surface from a sheet of steel or pipe. The optimal dimensions of the working surface are 70 by 40 cm. You need to cut a piece of the required dimensions from the sheet and bend it. If you decide to use a pipe, you need to cut it with a grinder and straighten it a little.
- Cut 2 metal plates measuring 20 by 10 cm. Make 3 holes in the resulting parts, located one above the other. Weld the plates on the back side of the paper clip horizontally at a distance of 5-7 cm from each other.
- Cut a stem from a steel tube that matches the height of the worker.
- At the lower end of the handle, weld another metal plate vertically to the surface of the ground and at an angle of 120-130 0 to the axis of the handle. The wheel axle and blade will be fixed on it.
- Weld a handle at the upper end of the handle.
- From a pipe with a diameter of 30 mm, cut a piece 60 cm long. The resulting tube must be used as a wheel axle.
- Make a hole in the plate welded on the handle, insert the wheel axle and weld it securely.
- Attach a rotating loop to the free end of the vertical plate. Secure its second flap to the back of the blade surface.
- Make a hook from thick wire. Insert it into the holes of the horizontal plates, thereby fixing the position of the blade.
You can see the design of such a scraper on wheels in the photo:
Making such a scraper with your own hands is not at all difficult. Anyone can cope with this task. For greater manufacturing accuracy, it is recommended to first make drawings and think through the sequence of actions.
Another option for making a scraper on wheels with your own hands can be seen in the video:
The video also shows the simplicity and effectiveness of using such equipment.
Helpful information
Tips for using a shovel on wheels:
It is necessary to keep the wheels clean. There should be no dirt, hair, dry grass or other debris wrapped around their axle that could impair rotation.- When cleaning the area, it is necessary to avoid large stones, bricks, and construction debris so as not to damage the bucket.
- If there are no rubber pads on the handle of the shovel, it is better to work with it while wearing construction gloves. This will prevent your palms from slipping.
Scraper selection options
Retail outlets offer a variety of snow scrapers, among which it is difficult to choose a convenient tool. Snow removal equipment has the following differences:
- size;
- material for making the handle and working surface;
- tool weight;
- shape of the working surface, handle;
- the presence of additional devices that simplify the removal of large snow drifts.
Usually, when buying a scraper, a person is guided by his financial capabilities, which is extremely wrong. The price is of great importance, but you also need to take into account the amount of work to be done.
First, scrapers are hand tools. Choose the size of the equipment according to your physical capabilities. The lighter and more convenient the scraper, the less fatigue you feel from clearing snow.
If you focus on lightness and long service life, preference is given to equipment made of aluminum or composite alloys.
Secondly, cleaning will be easier if a person does not bend over too much to scoop up snow. The scraper handle is selected according to your height. It is optimal to purchase a tool with a height-adjustable handle. Each family member can control the scraper, adjusting the handle to suit themselves.
Buckets of snow shovels and scrapers are made of plastic, composite alloys, plywood, aluminum, and galvanization. The cuttings are usually wooden or made from a thin-walled aluminum tube. The material of the handle only affects the ease of use of the scraper. The bucket is selected taking into account the surface on which snow removal is expected. To avoid damaging paving slabs or other types of decorative coating, cleaning is carried out with a plastic or wooden scraper. It is better to row on the ground or old asphalt with an aluminum or galvanized bucket. A plastic or wooden shovel will do, but they should have a steel blade on the edge that protects the blade from abrasion.
Shovels-scrapers for snow removal are produced with different bucket widths, and it varies on average from 25 to 80 cm. If you plan to perform a large amount of work, it is better to purchase equipment with increased bucket sizes, for example, a drag scraper. The tool can be operated even by two people. For easy movement, choose a model equipped with casters or small wheels.
Rules of operation and care
- Decide before purchasing where and for what you will use the tool. Use it for its intended purpose: do not try to chip ice or throw snow with it. A roof scraper is not suitable for removing large volumes of snow on personal plots and sidewalks.
- To break ice, you can use telescopic aluminum scrapers designed to clear roof slopes of snow and ice crust.
- To protect your hands from calluses and damage, use gloves.
- Choose lightweight models so you don’t get too tired after long work.
- Scrapers should be cleaned and dried immediately after use to prevent rust from forming on them. Dry the instrument away from heating devices. Lubricate metal parts and moving elements with machine oil.
DIY snow scraper
Many owners of private yards make snow scrapers and shovels themselves. Usually the structure is assembled from a sheet of tin or plywood and a handle. Craftsmen approach solving problems creatively. Draw up a drawing of a scraper for snow removal, which includes wheels, stops, skis and other devices.
Read also: Drainage pump for dirty water: rating
Wheeled scraper for snow removal
To clear large areas of snow, scraper blades are made, and wheels make them easy to move. To make a working surface, you will need a piece of pipe 60-80 cm long, 27-30 cm in diameter. The workpiece is opened lengthwise into 2 segments with a grinder. The solid semicircle for the blade is strongly bent. A strip 3-5 cm wide is also cut from it. You can try to slightly straighten the semicircular segment, but carefully to avoid the formation of dents from blows with a sledgehammer.
When the blade is ready, begin assembling the scraper on wheels:
- A steel plate is welded to the back side of the blade strictly perpendicularly in the center. At its edge, 5-7 holes are drilled in a semicircle. Another hole is drilled in the center of the plate.
- Take a piece of pipe. One hole is drilled at the end. The workpiece is connected with a bolt through the central hole of the plate. The tube will rotate up and down at the bolted connection. Now a second hole is drilled on it, matching those on the edge of the plate. The result is an adjusting mechanism for raising the blade. To fix it, use another bolt.
- The wheelset for the scraper is taken from an old stroller or made from a piece of pipe, with rubber wheels attached to the ends. The second end of the blade adjustment mechanism tube is welded to the center of the chassis.
- The handle in the shape of the letter “T” for the blade is made of steel pipe with a diameter of 20 mm. It can simply be welded to the center of the chassis at the desired angle, but it is better to make an adjustment mechanism, such as on the blade.
- The scraper is almost ready, but it will scratch the tiles and knock out crushed stone from the asphalt. You can improve it with a patch knife. It is cut in the form of a strip from a thick conveyor belt. Through matching holes are drilled along the entire length of the lining and the lower part of the blade, and the parts are connected with bolts. The finished structure for clearing a large area of snow is painted, providing protection against corrosion.
Before you start clearing layers of snow, set a comfortable angle for the bucket and handle. The elements are securely fixed with a bolt on the adjusting plate. They begin to shovel the snow with pushing movements forward.
A manual scraper on wheels can be easily converted into a shovel engine. The handle is disconnected from the chassis and placed on the walk-behind tractor using a hitch. If there is a motor lying around the farm, it is permanently installed on the scraper, having first welded a frame for it. Drive to the wheels is provided through a belt or chain drive.
Scraper with brush
When cleaning tile sidewalks and roofing, a telescopic snow scraper, additionally equipped with a brush, is convenient. The magazine version consists of an extendable aluminum rod with a comfortable handle attached to one end. A rectangular plate is attached perpendicularly to the second end. One of its edges is plastic or rubber, and the second is made of stiff bristles that form a brush. The hard side of the scraper is used to first remove thick layers of snow. Use a brush to sweep away the remaining thin layers.
You can assemble a similar scraper yourself, but it is better to attach the brush to the back of the blade on wheels. After one pass along the sidewalk path, the improved scraper leaves clean tiles without the slightest snow residue.
Ski scraper drawing
A traditional metal snow scraper in the form of a rectangular plate and a U-shaped handle is difficult to push. My back and arms get tired. In addition, the edge of the scraper often cuts into the ground if the tool is held at a shallow angle. The improved design shown in the drawing helps to simplify the removal of thin layers of snow. Essentially, the work consists of installing a finished scraper on the skis.
Skids 1 m long are made from corners. The edges are folded upward so that the skis do not crash into the ground. The scraper is fixed at an angle to the runners with bolts, having previously welded the eyes. The lower edge of the working plate should also rest on the skis, and not rest against the ground.
DIY snow scraper
Before you start making a scraper, you need to think about where the snow will be removed with the tool. Its shape and design will depend on this question. To remove a thin layer of snow from a flat surface, the simplest option with a U-shaped handle is suitable:
- A rectangle is cut out of an aluminum sheet 3 mm thick or plywood 5-6 mm thick. The width of the workpiece is taken as standard - 50 or 60 cm. The length depends on the physical capabilities of the operator. Usually they adhere to the parameter from 0.8 to 1.2 m.
- If plywood is chosen for the scraper, the edges are framed with steel tape to protect against abrasion.
- For a U-shaped handle, it is advisable to find a thin-walled tube. An excellent option is the frame of an old folding bed. It is made from an aluminum tube and it is already bent into a “P” shape. The handle is fixed to the plate with bolts.
The scraper is pushed through the snow with both hands, holding it at an angle toward you. Cleaning with a wide tool can be done by two people.
It is more convenient to remove large drifts and transport snow outside the territory using a drag scraper. The most difficult thing to make in such a tool is a ladle. It is cut out of thin galvanized steel or sheet aluminum. The joints of connected fragments are fixed with rivets or bolts with a diameter of 5-6 mm. A U-shaped handle is fixed to the bucket with a bolt connection. Fastening is carried out as often as possible so that when lifting a bucket loaded with snow, the sheet metal does not break.
To remove snow from the roof, a plastic scraper is used. The design consists of a handle with a rectangular plate at the end. When making it yourself, the working surface is cut out of a plastic barrel. It is advisable to make the handle collapsible from aluminum tubes. This scraper makes it more convenient to remove snow from slopes without climbing on them.
Read also: Minitractor Catmann XD-325 characteristics, attachments, video, price and owner reviews
For the collapsible handle, tubes of different diameters are used. If the workpieces are the same in thickness, adapters are used. We need to find at least small pieces of a smaller diameter pipe. Long pipes are placed on the workpiece at both ends. To prevent the scraper handle from coming apart while removing snow from the roof, the joints are reinforced with bolted joints.
The disadvantage of the end model is the cleaning process. You have to pull the snow on yourself. After passing one strip, the scraper is again thrown onto the top of the roof slope.
The best telescopic scraper for removing snow from the roof is a frame structure. In the home version, the handle is similarly assembled from aluminum tubes. A rectangular frame made of a rod or thin tube is attached to the end. The size of the part depends on personal preference. A long strip of waterproof fabric is fixed to the bottom element of the frame. A piece of old awning or thick film will do.
Snow removal is carried out by cutting layers. The scraper frame is pushed along the roof slope from bottom to top. The cut snow slides down the belt, falling under the foundation of the building.
The video will help you make a simple and reliable scraper:
Size and design
The size of the brush and the length of the handle are directly proportional to the size of the car and inversely proportional to the height of the owner. Short drivers of crossovers and SUVs should choose a brush longer than a meter that allows them to reach the opposite end of the roof. In addition to their great height, such cars have an impressive roof area: cleaning with a small brush can easily take half an hour. For owners of city sedans and hatchbacks and/or long arms, a simple brush of 50–70 cm is sufficient.
Brushes with complex designs with a telescopic or rotating mechanism are best avoided. In severe frost, plastic parts easily crack, and snow often clogs the mechanisms and blocks mobility. In addition, sliding brushes suffer from stiffness when shoveling heavy wet snow - they can fold or even break. The simpler the design, the stronger the brush and the longer it will last.
Length and stiffness of bristles
Long bristles bend easily and sweep away snow ineffectively; the optimal length is no more than 5 cm. Thick bristles are also not the best option; 5–6 rows of synthetic bristles are enough to sweep away snow. This brush is easier to clean afterwards and avoid puddles in the trunk from melted snow.
Brushes with hard bristles are convenient for removing stuck snow, but you need to be careful with the hardness. Even the stiffest bristles do not leave visible scratches, but over time the paintwork becomes dull from micro-scratches.
Scraper required
For a motorist, a scraper is a must in the trunk; some manufacturers even put them in the fuel tank filler cap. Most brushes have a built-in scraper, which is good. It’s even better if the scraper is removable: it’s more convenient to clean the glass and you can work together.
There are only two requirements for a scraper: it must be made of polycarbonate and have spikes. Polycarbonate is frost-resistant, and the spikes will help break ice in extreme situations - when an ice crust forms after a long period of inactivity or freezing rain.
What inventions of shovels and scrapers for snow removal do we see on our streets? 1
Winter, after the autumn slush and the dirty gray inhospitable surface of the earth, recently covered with grass, pleases us with the first snow and brightened streets. Children do not crawl out of the snowdrifts, and babies look in surprise at the white flakes continuously falling to the ground, at their faces and small palms...
Fiskars snow shovel
Snow scraper
But not everyone is not always happy about snow. Time will pass and not only the wipers in the morning, but also we, in a hurry going to work, will curse and grumble: “Well, where did so much snow come from?” And dream of having such a miracle snow shovel that would, without much difficulty, remove everything right down to the asphalt. But, alas, they have not yet invented a shovel-bulldozer so that each wiper is motorized. And that’s why simple homemade plywood shovels with a tin edge are still in use, and craftsmen are still thinking about new ideas for hand shovels for snow removal. In the meantime, we see various new plastic shovels that can generally be used comfortably to capture large volumes of snow.
Gardening tools and other products in this Chinese store.
How to use?
to use a shovel according to the following algorithm:
- if the shovel is disassembled, it must be assembled by fixing the working surface on the frame, connecting the stand to the handle, and installing the wheels;
- before each use of the shovel, it is necessary to check the reliability of all fastenings;
- The product, ready for use, is rolled out onto the site and snow removal begins;
- it is necessary to ensure that there are no stones or other debris on the path along which the shovel will pass - a collision with an obstacle at speed can cause damage to the product;
- resting your palms on the handle, push the shovel forward, shifting the snow masses in the desired direction;
- After cleaning is completed, snow and dirt are removed from the working surfaces, the bucket is wiped with a dry cloth and sent for storage.
For the summer, the shovel can be disassembled, the wheels and handle removed. In this form, the tool is put in a box in which it will take less time.
Plow for clearing snow from areas by hand
A more advanced means of small-scale mechanization for cleaning is a manual snow blade from Ukraine. This, one might say, is a manual excavator; a person pushes the bucket of such an excavator, and to facilitate his work, the friction force is reduced with the help of wheels.
Characteristics of a manual snow blower: Blade: metal sheet 2 mm, size LxW 1000x400 mm with a rubber plate at the bottom. Handle: T-shaped (pipe DN 20x2.8 mm with two rubber handles) Chassis: axle made of pipe DN 15x2.5 equipped with two pneumatic wheels measuring 260x85 mm. The design of the blade allows for adjustment of the angle of the working surface.
The video shows a manual snow plow in action.
How to make a snow scraper from 0SB
When you urgently need to remove snow, and you only have a piece of OSB board at hand, you can make a scraper using simple manipulations with a jigsaw. To assemble a scraper with your own hands for clearing snow, you don’t need drawings, but you need to build a pattern.
On the OSB board, draw the shape of the future scraper with a pencil. Towards the bottom, the drag scraper is expanded to 1 m. The corners are slightly rounded. Toward the top, the plate is narrowed approximately 30 cm from each edge. Two oblong holes for handles are drawn on the pattern. Now all that remains is to cut off the excess parts of the OSB board using a jigsaw according to the markings. The area near the handles is carefully sanded with sandpaper. For convenience, they can be wrapped with electrical tape.
A slightly unusual snow shovel “Sno Wovel”
Foreigners have come up with a somewhat strange, innovative shovel on a wheel for clearing snowdrifts. It's called "Sno Wovel". It can easily be classified as a snow miracle shovel, because like its summer counterparts, it is designed to help relieve the back from stress and injuries. Well, since a lever is used, by applying a little effort, you can pick up large volumes of snow with a shovel and carry them and even throw them away. Manufacturers estimate that the required force is reduced by 80 percent thanks to the lever system and wheel. Like riding a bicycle, we travel a long distance, and we are several times less tired than walking.
Technical features of the shovel. Weight: 19.5 kg; Total length: 188 cm; Height adjustment; Tire diameter: 89 cm; Scoop width: 66 cm. Overall dimensions for storage and transportation: 86 cm x 20 cm x 50 cm
Look how cute the child laughs as he looks at his dad deftly handling this excavator
What it is?
A wheeled shovel is a modified version of the classic snow shovel. The main difference is the wheels, which help increase productivity and make work easier.
The design is simple, even a child can operate it. The mechanism is represented by the following elements:
- bucket fixed on the frame;
- wheels;
- stalk;
- handle in the shape of the letter D or P;
The tool can be used both within the city and beyond. It will be an excellent solution for cleaning relatively small areas.
Main stages of work
Next, you will need to make the side walls of the scraper, which will be attached to the plywood. And for this, the master cuts two blanks from the board. If you have an edged board available, the work will not take much time.
At the next stage, you will need to screw the plywood to the side walls with self-tapping screws. For reliability, it is better to glue the boards and plywood together. PVA is not suitable for this purpose - it is afraid of moisture, but you can use polyurethane foam.
Then all that remains is to strengthen the lower part of the bucket with a galvanized strip and attach the handles, which the master made from wooden slats. To protect it from moisture, it is better to coat the scraper with a layer of varnish.
You can watch the detailed process of making a homemade snow scraper from plywood and boards in the video on our website.
High quality and expensive
FISKARS 1019352
The brush is frost resistant. Its purpose is to clean the windows and car body from snow and formed ice. The reverse side of the scraper is equipped with a comb, its task is to remove water. Thanks to the movability of the comb blade, the user can use the device at the desired angle. The bristle of the brush is made of silicone. It will not scratch the body coating.
The equipment can easily clean side mirrors and car windows, as it can be used as several separate snow removal tools.
Users who have used the FISKARS 1019352 brush-scraper note the versatility of this model. One of the weaknesses of the tool was the not very reliable fastening of the scraper. And a small lever will require significant effort to clear the elements of the car from adhering wet snow.
FISKARS 1019352Advantages:
- high-quality material;
- multifunctionality;
- no accumulation of ice and snow;
- compactness of the model.
Flaws:
- unreliable fastening at the scraper;
- short handle.
Michelin 6866MCH
The Michelin 6866MCH sliding brush is an effective and high-quality product from a tire manufacturer from France. Thanks to it, the owner of the car will be able to complete all the preparatory work before the trip without any problems. The length of the tool is varied through the retractable part of the handle. On the back of the handle there is a scraper with a width of 9 cm. The length of the brush pile, which allows you to quickly and efficiently remove snow from the car, is up to 25 cm.
After using the scraper, there will be no marks or scratches left on the car body. Experts liked the ergonomic design of the handle and the excellent quality latches. Users note that it is inconvenient to extend the handle; to do this, you will have to hold the metal part of the handle, which is not very convenient. Scrolling some elements of the model also causes discomfort while working.
Michelin 6866MCHAdvantages:
- quality of materials;
- frost resistance;
- no accumulation of snow;
- perfect length.
Flaws:
- inconvenience of extending the handle.
Karcher EDI 4
The KARCHER EDI 4 battery-type scraper aroused genuine curiosity among car owners. The work of breaking ice will be performed by a rotating part of the equipment, which has durable disks made of plastic. Activation of the “standby” mode is carried out by pressing on the upper part of the scraper. You can change the blades without a specialized tool. Just one battery charge will allow you to clean your car windows several times. When the battery is very low, an LED indication appears.
Motorists are just starting to look at the KARCHER EDI 4 scraper, as it has a very high cost. The convenience of the unit and cleaning efficiency attracts the interest of car enthusiasts.
KARCHER EDI 4Advantages:
- comfort and convenience;
- high efficiency;
- ease of maintenance;
- modern design.
Flaws:
- high price.
A brush-scraper is indispensable in the winter. Without it, it is difficult to clear snow and ice from car windows. The rating of popular models will help the car owner make the right choice. It is worth paying attention to the functionality of the device and its practicality. As well as positive ratings from users who have tried this or that model.
