KS 35715 Ivanovets is a truck crane with outstanding capabilities, highly in demand in the professional field. Its potential can be unleashed in construction, as well as in agricultural and search and rescue operations. Thanks to its relatively compact dimensions, low weight and dynamic characteristics, this self-propelled vehicle demonstrates high maneuverability, smooth running and ease of control in cramped conditions. The equipment is suitable for any task, because it was originally designed for operations where all the power, reliability and stability of operation under enormous loads are required from the equipment. This model is ideal for fulfilling orders of national importance, as well as for meeting the needs and requirements of private entrepreneurs.
Description and purpose
KS-35715 Ivanovets is built on the basis of the MAZ-533702 automobile chassis and has a load capacity of 16 tons. The equipment is relatively compact and maneuverable, endowed with outstanding off-road capabilities. The universal characteristics of the truck crane allow the operator to adapt to specific tasks without fear of damage to moving parts. The high-performance chassis MAZ-533702, as well as the crane module, have been tested under harsh conditions.
All controlled mechanisms of the truck crane can be adjusted to the type of cargo, its dimensions and weight. The main area of use of the MAZ-533702 is moving objects over certain distances, installing buildings and structures, as well as bulky technical devices in both horizontal and vertical positions. This model is in demand in logistics centers and other large organizations - where low-power manipulators need to be replaced. Moreover, this self-propelled vehicle is adapted for search and rescue operations, which require active participation in dismantling and removing rubble by special forces of the Russian Ministry of Emergency Situations.
Chassis advantages
In the construction of Ivanovets truck cranes, 9 MAZ chassis were used in six models of equipment. The operational advantages of cars from the Minsk Automobile Plant are as follows:
Minsk Automobile Plant
- high reliability and adaptability to any weather conditions;
- maintainability and availability of parts for repair;
- simple maintenance and prevention;
- simplicity of design of power units;
- long engine life;
- low cost of service.
The production offers a variety of vehicles with different powers, engine versions, body volumes and carrying capacity, which allows you to select the most compatible equipment. The machines are characterized by good maneuverability, simple operation and ergonomics, which makes them suitable for working in difficult operating conditions.
Specifications
- Chassis – MAZ-533702
- Wheel layout – 4x2
- Engine type – diesel, YaMZ-236NE2
- Power – 230 horsepower
- Load capacity – 16 tons
- Load moment – 48 tm
- Boom parameters: reach – 1.9-17 meters; lifting height with jib – 9.1 – 18.4 meters; Boom length – from 8 to 18 meters; jib length – 7 m; boom height with jib – 25 m
- Speed when lifting/lowering loads – 8.5 m/min
- Dimensions, mm: Length – 10,000, Width – 2500, Height – 3850
- Total weight with boom – 17 tons.
MAZ truck crane - features, scope of application
The MAZ-5337 truck crane is used for:
- loading and unloading operations;
- work in production;
- construction and installation works.
Features and advantages of the MAZ truck crane:
- maneuverability;
- modified driver's cab . There is no sleeping place in the cabin; the seat has a sprung base. It is possible to adjust the distance to the control panel, seat height, seat angle, and chair back;
- the dashboard and interior trim elements have special pads designed to absorb impact energy ;
- improved sound and heat insulation , heating and ventilation systems;
- multifunctionality;
- the installations are reliable and safe to operate ; it is possible to perform several crane operations simultaneously;
- ease of control and choice of operating speed;
- versatility in repair;
- ability to work in any weather conditions , operation at temperatures ±40C;
- adaptation to unpaved roads , gravel roads, off-road;
- low cost;
- low maintenance , simple connection of the crane to the vehicle chassis.
Features of the device and operation
Thanks to the lifting capacity of 16 tons, the equipment exceeds the average class, and due to this, it demonstrates its advantageous qualities against the background of classic medium-tonnage truck cranes. The KS-35715 model has a special graphic card with which you can determine the load capacity by weight. The map is provided in the user manual. The truck crane of the same name is equipped with actuators that are controlled by a drive independently of hydraulics. This mechanism is simple and reliable to use, quite functional and has good maintainability. The hydraulic drive is designed to provide smooth adjustment of outriggers and crane mechanisms. Speeds can be adjusted over a wide range, allowing you to increase productivity and perform multiple operations simultaneously.
In addition, the three-section telescopic boom, which is considered more in demand compared to booms with fewer sections, deserves special attention. When retracted, such a boom has compact dimensions, which has a positive effect on maneuverability, comfort and ease of movement in cramped conditions. In addition, compared to the 2-section model, the 3-section boom allows loads to be moved to noticeably greater heights and distances. In addition, in order to expand the service area and increase the space under the boom, the developers equipped the crane with a so-called jib, which is a lattice boom extension. It is attached to the side of the boom and allows you to extend the height of movement of objects. To move the jib into the working position, no technical devices are required, because for this a light movement of one adult is enough.
KS-35715 is equipped with a YaMZ-236NE2 diesel power unit, which is supplied with the chassis of the Belarusian MAZ-533702 truck. This power plant is designed for operation in severe climatic zones ranging from minus 60 to plus 50 degrees Celsius. In this case, the permissible relative air humidity should be 98% at +25 degrees. Due to the power of 230 hp. With. we can talk about excellent dynamic characteristics by cargo standards.
The truck crane chassis can be used comfortably in urban and suburban areas. The compact 4x2 wheel arrangement made it possible to reduce the overall weight of the car, and thereby increase the already good maneuverability when cornering. In addition, these benefits have a positive impact on fuel efficiency. Thus, the truck crane can cover long distances without fear of running out of fuel. In urban conditions, the transport speed of the Ks-35715 can reach 60 km/h, which allows it to keep up with other cars.
All work operations are performed at high speed, and this has a positive effect on labor efficiency and productivity. Judging by the speed of raising and lowering the boom, lifting capacity, rotation speed and other indicators, which are decent compared to its competitors, the KS-35715 truck crane gives the impression of being a technologically advanced vehicle suitable for one-time work at dispersed sites.
The truck crane is able to quickly reach its destination, and in a short time transform from the transport position to the working position for the subsequent performance of various procedures. After completing the assigned tasks, the equipment is quickly folded into a transport position and sent to another object, and so on.
The design of the truck crane is simplified as much as possible, and this, of course, has an impact on ease of use and low cost of ownership. In addition, the developers did not forget about the safety system, which prevents overload or overheating of the working parts, and, if necessary, notifies the driver of a problem. Thus, the operator will be able to eliminate the problem in advance, and thereby eliminate the occurrence of larger problems.
Crane device
The design of the KS-35715 truck crane is conventionally divided into rotary and stationary working parts. Main components:
- supporting structures made of metal;
- drive units;
- chassis with supports, stand, hydraulic equipment;
- rotating part with a working platform, boom structure, counterweights, operator's cabin.
The rotating and stationary parts of the KS-35715 crane are connected by a rotating support mechanism.
Construction of the KS-35715 truck crane
The main working device of the Ivanovets KS-35715 truck crane is a telescopic boom, consisting of three sections. The latter are welded from steel with a low content of alloying elements and high strength.
Ivanovets KS-35715 can be additionally equipped with a lattice extension of 9 meters. Load-grasping organ – grappling hook. Its vertical movement is carried out with a load by a winch. The MAZ-5337 chassis is controlled from the driver's cab. The control levers of the crane installation are located both in the cabin and on the chassis frame.
Control drives for truck cranes KS-35715
Joysticks in the cabin control the following operations performed by the truck crane:
- rotation of the turntable;
- changing the angle of inclination of boom equipment;
- moving the hook;
- extension of boom sections.
The devices are driven by a hydraulic drive. The latter is powered by the chassis base engine. The truck crane operates on two support circuits.
Model cost
Today, the MAZ-5337 truck crane is no longer in production, but more modern vehicles are being produced. You can buy a truck crane on the secondary market.
The cost of a MAZ-5337 truck crane is determined based on:
- Technical condition and percentage of wear of the vehicle, crane.
- Truck crane configurations, number of additional options.
- Sales region.
The cost of the 1990-1994 model ranges from 300,000 to 700,000 rubles.
Model price 2004-2008 release starts from 1,000,000 rubles. It is possible to purchase on credit or draw up a leasing agreement.
A crane sold in Moscow, but geographically located, for example, in Izhevsk, costs less and will last longer.
The cost of renting a MAZ-5337 truck crane is 800-1500 rubles/hour.
All MAZ-5337 cranes are distinguished by good load-height characteristics and reliability of the main components.
Truck crane KS 35715-2 “Ivanovets” MAZ-5337
ATTENTION color! The site presents cars of different colors. All requirements and wishes regarding the color and finishing of products should be agreed upon at the stage of developing technical specifications and concluding a contract.
Also for this truck crane you can purchase: slings, chains, chucks [open order sheet]
Load-height characteristics of the Ivanovets KS 35715-2 truck crane
The technical characteristics of the vehicles given on this page are for reference only , because parameters and other performance indicators depend on the vehicle configuration desired by the buyer.
At the same time, the manufacturer reserves the right to change the technical characteristics of the vehicle, as well as the composition and list of components used for its manufacture, if these measures are aimed at improving the design parameters and performance of the vehicle and do not change its purpose.
