Excavators
The Turkish company HIDROMEK was founded in 1978 in Ankara, where the headquarters of the company is still located. At first, the company produced units that made it possible to convert wheeled tractors into backhoe loaders. HIDROMEK began producing its own excavators in 1989, being the first manufacturer of such equipment in the country.
Today, this company has more than 15 years of experience in accordance with the international requirements of ISO 9001. This fact alone indicates that the quality of HIDROMEK equipment meets the highest level. The company is known for using high-quality foreign components along with its own engineering developments. Today, the share of components produced by HIDROMEK's own production is almost half of all parts used for the production of excavators.
Today, the equipment of this manufacturer not only occupies a leading position in the domestic market, but is also exported to more than fifty countries around the world. This includes most CIS countries.
The highest quality of components is the result of strict control. Each part, both produced at the HIDROMEK factory and purchased from suppliers, undergoes an appropriate check, according to the results of which the slightest deviations from the norm are recorded, subject to further correction. Typically, no more than 0.1 percent of all cars coming off the assembly line are subject to modification.
Technical specifications
The Hydromek backhoe loader is manufactured in Turkey and is equipped with components from well-known brands, which significantly increases its reliability. Excellent performance characteristics are ensured:
- Engine with four cylinders and a power of one hundred horsepower. The volume of the unit is 4.4 liters.
- German automatic transmission with eight speeds, of which five are forward and three are rear.
- Electronic control program AutoShift.
- Powerful hydraulic power steering.
- The volume of the bucket is 0.17 m3 for digging, 1.1 m3 for loading.
- Maximum loading height is 3.47 m, digging depth is up to 6 m.
- Support feet for increased stability.
- Weight 9 tons.
- The ability to brake with only one pair of wheels.
Backhoe loader Hydromek 102s
Additional components
They will help expand the functionality and increase the efficiency of the unit
- Ripper.
- Hydraulic hammer.
- Grader bucket.
- Logger.
- Buckets of different widths.
- Drilling rig.
Cabin
Additional comfort for the operator is provided by air conditioning and forced air purification systems, a small refrigeration compartment for braking, and adjustable steering wheel and seat positions. The interior decoration meets all sanitary and technical standards in accordance with international standards. The removable metal flooring under your feet can be easily removed and cleaned of dirt. A large number of glasses increase the operator's viewing angle. All control nodes are located in one place, which significantly increases the speed of operation. Additionally, the cabin is equipped with an audio system for listening to music from removable media.
Cabin Hydromek 102s
Specifications
Depending on the model, HIDROMEK excavators may have different characteristics. However, there are a number of features that are characteristic of the entire model range of these machines. Let's look at them in more detail:
- Power units designed to operate in harsh winter conditions. According to testing results, engines start even at a temperature of -40 degrees Celsius.
- Relatively low noise level and minimal amount of harmful emissions into the atmosphere.
- Many models of wheel loaders have the possibility of a so-called “crab” move, in which all wheels of the machine simultaneously turn in the required direction. This ensures high maneuverability of the excavator, which does not need a full turn in order to move in the right direction.
- Even HIDROMEK mini loaders are equipped with very powerful hydraulic units. For example, the HMK 62SS model has a hydraulic operating pressure that can reach 220 atmospheres. If you connect an additional pump to the system, this figure can be doubled.
- The latest developments are used in the manufacture of the cabin. In particular, a color display is installed here, on which all the necessary information can be displayed.
Device
The wheel arrangement is equipped for two modes of movement: “trail to trail”, as well as “crab travel”. The identical diameter of four wheels allows you to develop high speed while maintaining maneuverability. Control of four wheels at the same time makes it possible for the loader to turn around its axis. The Hidromek HMK 102s backhoe loader has increased reliability during operation, achieved by this design of the chassis system. The hydraulic system is equipped with a gear hydraulic pump capable of withstanding a pressure of 230 bar.
Be sure to read: Buy a new and used tow truck
Description of HIDROMEK backhoe loaders
Turkish construction equipment produced at the HIDROMEK plant are reliable and high-tech machines designed to work in difficult conditions. Thanks to the use of attachments, the functionality of these machines is significantly expanded.
They can be used to perform the following work:
- Loading and unloading various materials. In its basic configuration, the excavator is designed to work with bulk materials, but by using attachments it can be used to transport various construction raw materials.
- The main purpose of any excavator is land work of varying complexity, including the development of territory.
- Carrying out road works, etc.
Today, backhoe loaders are simply indispensable in road construction, the construction of various industrial and residential facilities, etc. The HIDROMEK company produces professional equipment that performs well when carrying out a wide range of work in difficult conditions.
Advantages and disadvantages
With careful operation and timely maintenance, the loader is capable of trouble-free operation. Reliability and durability are guaranteed by internationally renowned component manufacturers. According to consumer reviews , it has no significant drawbacks; relatively inexpensive spare parts ease the material burden of maintenance. The most common repairs are replacing spark plugs. The technical characteristics of Hydromek 102s have repeatedly proven their effectiveness in extreme weather and landscape conditions.
Excavator loader Hydromek (Hidromek HMK)
The Turkish engineering company Hidromek began its production activities relatively recently, in 1986, when its own plant came into operation in the country's capital.
The first products were mounted units for converting wheeled tractors into loader-excavators. Already in 1989, the production of Turkey's first backhoe loaders of its own design under the HMK-80 brand was launched. Almost every 10 years a new enterprise was put into operation in Ankara, and in 2001 a modern assembly plant was opened in Izmir for the production of special equipment of the Hidromek brand. .
For more than 15 years, the company has been operating in accordance with the requirements of ISO 9001, which indicates a high potential for quality and production technology. In the design of manufactured equipment, the presence of Turkish and foreign components is approximately equal. The most important components are purchased from well-known global manufacturers such as John Deere (USA). Perkins (England), Mitsubishi (Japan), Bosch Rexroth (Germany), etc.
Over the past 25 years, Hidromek has taken a strong position in the Turkish market of wheeled and tracked small excavators and loaders, and exports its equipment to 50 countries, including most of the CIS countries.
Particular attention is paid to the quality indicators of equipment and technology. For each part of our own production, a special card is created, in which the slightest deviations from the working documentation are recorded. All purchased materials, semi-finished products and components are subject to multi-stage input control. The norm is a situation in which no more than 0.1% of cars are sent off the assembly line for revision.
The products of this Turkish company deservedly enjoy a stable reputation as reliable and durable equipment, including Hydromek excavator loaders.
Hidromek in Russia
The Russian market is an important segment of Hidromek's export strategy, both in terms of logistics and market capacity. The Turkish Gidromek excavator loader competes very successfully with products from other manufacturers, since its cost is significantly lower than that of its European and American counterparts, and its quality and reliability indicators are not fundamentally different.
The positive aspects of Hidromek's export policy include the company's focus on a decent level of after-sales service and uninterrupted supply of spare parts to consumers, especially during the warranty period. In specialized warehouses, as a rule, 95 percent or more of the entire list of spare parts, components and assemblies are in stock.
Russian official dealers of Hidromek declare that if the required part or assembly is not available, any request will be satisfied within up to 2 days by fast courier service.
Hidromek 102S and 102B excavator wheel loaders with a telescopic boom have become especially popular, and the Turkish company supplies them in the required quantities. It should be noted that Turkish specialists have carefully studied the issues of operating their equipment in Russian winter conditions and achieved reliable start-up of power units at air temperatures down to – 40˚C. According to information received from trading organizations, there were no complaints from consumers.
In recent years, Russia has become the leader in sales of Hidromek products, even ahead of Bulgaria. The company's management plans to create an assembly plant and a large warehouse terminal for spare parts in Russia.
Hidromek 102S
The Hidromek HMK 102S backhoe loader is equipped with an English power plant of the Perkins 1104 D brand. The diesel volume of 4.4 liters allows it to develop power up to 100 hp. With. with an acceptable noise level and a low volume of harmful emissions.
An open-type hydraulic system with an English-made tandem gear pump is effectively used. The maximum hydraulic pressure can be 230 atmospheres, which ensures powerful performance of the working bodies.
Hidromek HMK 102S is equipped with a German-made ZF AUTOSHIFT automatic transmission, Carraro (Italy) axles designed for harsh operating conditions, and has 5 forward and 3 reverse gears. The maximum speed of independent movement can be 40 km/h. A distinctive feature of the chassis of the Gidromek102S excavator loader is the possibility of using the so-called crab drive, when all wheels simultaneously turn in the desired direction. This innovation significantly increases the maneuverability of the machine when working in cramped conditions.
The performance characteristics of the front loader allow a 2.4 m front to capture 1.1 cubic meters. m of soil and raise it to a height of 3.5 m.
The performance characteristics of an excavator with a telescopic boom provide a digging depth of up to 5.7 m with a 200-liter bucket and an unloading height of up to 6.6 m with a rotation angle of more than 180 degrees.
The manufacturer offers a wide range of additional attachments:
- bucket size range;
- Euro pallet forks;
- hydraulic hammer;
- gripper for round timber;
- grab grip;
- grader blade;
- hydraulic drill
It should be noted that installing a clamshell transforms the machine into a jaw excavator loader.
The cabin meets modern ergonomic requirements and provides the operator with extensive visibility, a comfortable microclimate, and ease of operation and maintenance.
Hidromek 102B
This Maestro series machine is in many ways close to the product described above. The main differences are that the Hidromek HMK 102B backhoe loader is equipped with a more reliable and more economical engine produced by the American corporation John Deere. Hidromek HMK 102B does not have a crab drive function. The rest of the technical characteristics are the same or close to the characteristics of its brother HMK102S.
Mini backhoe loader Hidromek HMK 62 SS
The latest development of Turkish manufacturers of special equipment is the mini excavator loader Hidromek HMK 62SS. This model is designed for work in public utilities and rural areas. It has small dimensions, amazing maneuverability and weighs half as much as previous machines. At the same time, it is equipped with an economical Japanese turbodiesel engine of the Kubota brand with a power of 50 hp. and complies with EU environmental directives.
Hidromek HMK 62SS has very powerful hydraulics with a working pressure of 220 atm, and when an additional pump is connected, this figure can double.
The cabin is made taking into account all the latest developments and is equipped with a color display to display the necessary information.
