Benefits of using IVECO with a refrigeration unit
- A powerful and reliable IVEKO vehicle simply must have a refrigeration unit - this will expand its capabilities and bring additional profit by expanding the services offered
- Features of the IVECO van allow you to install most popular refrigeration units from inexpensive to technically complex.
- With our refrigeration units, you will be able to transport perishable food products, for which there are not so many carriers.
note
By purchasing a new refrigerator for an Iveco-based isothermal van in our center, you will receive a wide range of installation and maintenance services for this equipment, as well as a guarantee of the quality of the refrigeration unit.
ISOTHERMAL van made of SANDWICH PANELS
Isothermal vans are designed for transporting goods that require protection from the effects of the atmospheric environment and maintaining a certain temperature regime inside the body. Most insulated vans are equipped with refrigeration units; such vans are called refrigerators. Depending on the temperature requirements of the transported products, isothermal bodies of three degrees of isothermality are installed on vehicles: low; medium or high.
SANDWICH van options: | Clad » HIT SELLING » | Plastic |
Cladding material: | Clad metal | Reinforced plastic |
Thermal insulation material: | Polyurethane foam (PPU) | |
KFG Color: | White | |
KFG design: | Frameless |
Table of correspondence between vehicle modification and standard dimensions of the chassis superstructure:
MODIFICATION IVECO 35C15 Single Cab (single cab) | Short wheelbase 3000 mm | Average wheelbase 3450 mm | Long wheelbase 3750 mm | Long wheelbase 4100 mm |
Dimensions of KFG (mm.) | 3100x2200x2015 | 3750x2200x2015 | 4350x2200x2015 | 4600x2200x2015 |
- It is possible to manufacture and install CFGs with modified (increased/reduced) overall dimensions within the limits permitted by OTTS. Detailed information from our specialists.
As standard, the vans are equipped with:
- The outer frame is made of galvanized steel with an enamel coating. The roof and front wall frames have a rounded profile, which improves the aerodynamic properties of the van. Vans are equipped with side lights (2 front white and 2 rear red)
- Rubber bumper (2 pcs.)
- Handrail
- Retractable ladder
- Plastic fender liners with mudguards
- Floor covering - laminated plywood mesh wear-resistant
Optionally, vans can be equipped with:
- Additional doors
- Changing standard sizes of KFG
- Imported stainless steel fittings
- Rings for securing cargo
- Rigging rail for securing cargo
- Aluminum frame KFG outside (semicircular corner)
- The inside of the van is covered with 6mm plywood.
- Aluminum/steel quintet flooring
- Filled floor
- Placing your advertisement on the van
Chassis Specifications
Modification of the IVECO 35C15 Single Cab car | Single cab chassis | |||
Code | 35C15 | 35C15 | 35C15 | 35C15 |
Wheelbase | 3000 | 3450 | 3750 | 4100 |
Gross weight (kg) | 3500 | 3500 | 3500 | 3500 |
Load capacity (kg) | 1580 | 1560 | 1550 | 1540 |
Vehicle's own weight (unloaded) (kg) | 1920 | 1940 | 1950 | 1960 |
Maximum permissible load on the front axle (kg) | 1900 | |||
Clearance | 177 | |||
Number of seats | 2+1 | |||
Wheel formula | 4×2(spark) | |||
Engine | F1С turbo with intercooler | |||
Number and arrangement of cylinders | 4, in-line | |||
Working volume (cm3) | 2998 | |||
Maximum EC power: kW (hp) at rpm | 107,38 (146) | |||
Maximum torque according to EC: Nm (kgm) at rpm | 350`0-2600 | |||
Environmental class | Euro 4 | |||
Gas distribution system | Timing chain | |||
Fuel | DT | |||
Fuel supply system | Common Rail Multijet | |||
Transmission | ||||
Drive unit | Rear | |||
Clutch | Single disc, dry | |||
Gearbox: number of steps | 6 + 1 | |||
Gear ratios 1st stage | 5.37 | |||
6th | 0.79 | 0.79 | 0.79 | 0.78 |
Steering | ||||
Type | Rack and pinion with amplifier | |||
Brake system | ||||
Type | Hydraulic with ABS, EBS | |||
Front brakes | Disk | |||
Rear brakes | Disk | |||
Suspension | ||||
Front | Front independent suspension, torsion bar | |||
Rear | Dependent with longitudinal parabolic leaf springs, telescopic shock absorbers and elastic travel limiters. | |||
Wheels | ||||
Tires | 195/75R16C | |||
Total information | ||||
Fuel tank capacity | 70 | 70 | 70 | 70 |
Maximum speed (km/h) | 130 | 90 | 90 | 90 |
Dimensions, mm | ||||
Wheelbase | 2900 | 3000 | 3450 | 3750 |
Length | 5540 | 5334 | 5899 | 6509 |
Width | 2066 | 1996 | 1996 | 1996 |
Front track | 1700 | 1696 | 1696 | 1696 |
Rear track | 1560 | 1541 | 1541 | 1541 |
Height (no load) | 2570 | 2295 | 2285 | 2280 |
Front overhang | 1030 | 998 | 998 | 998 |
Rear overhang | 1550 | 1240 | 1355 | 1665 |
Frame height | 780 | 779 | 785 | |
Permissible rear overhang of the body relative to the axis of the rear axle | 1240 | 1355 | 1665 | |
Loading height (unloaded) | 960 | |||
Fuel consumption, l/100 km | 13 | 9 | 9 | 9 |
Iveco Daily
At Van-Auto you can buy a new isothermal van made of sandwich panels (polyurethane foam insulation) on an Iveco Daily . This can be a standard sandwich van from stock, or one made to your individual order.
Installation of the van and additional equipment on the vehicle chassis is carried out on the territory of the Furgon-Avto production base in Naberezhnye Chelny.
Van configurations.
Iveco Daily sandwich vans are made from monolithic sandwich panels using polyurethane foam . Depending on the thickness of the sandwich panels, the sandwich van can be made in any of four configurations:
- Economy
- Standard
- Maximum
- Maximum plus
The thickness of the platform (floor) of a sandwich van on the Iveco Daily is:
- 78 mm. (chassis 35C) or 87 mm. (chassis 50C15, 65C15, 70C15) - for “Economy” and “Standard” versions
- 118 mm. (chassis 35C) or 127 mm. (chassis 50C15, 65C15, 70C15) - for “Maximum” and “Maximum +” versions
>>> More details about the configurations of isothermal sandwich vans
Dimensions | Useful volume.
Standard overall dimensions of an insulated van made of sandwich panels on an Iveco Daily :
Iveco Daily chassis 35C Gross weight 3.5 tons. | Iveco Daily chassis 50C15, 60C15, 70C15 Gross weight 5.2…7 tons. |
3.1 x 2.2 x 2.015 m. 3.75 x 2.2 x 2.015 m. 4.35 x 2.2 x 2.015 m. 4.6 x 2.2 x 2.015 m. | 3.75 x 2.2 x 2.2 m. 4.35 x 2.2 x 2.2 m. 5.335 x 2.2 x 2.2 m. 6.19 x 2.2 x 2.2 m. |
useful volume 10.9…17.8 m³ | useful volume 14.6…24.5 m³ |
The length of the van depends on the modification of the vehicle chassis. We can make custom size sandwich van to order.
Basic equipment.
The basic equipment of an isothermal sandwich van on the Iveco Daily chassis includes the following elements:
- The interior and exterior of the van are white clad metal
- The floor covering is mesh metallized plywood 9 mm (chassis 35C) or 18 mm. (chassis 50C15, 65C15, 70C15)
- Gates - rear, swing, double-leaf, with opening 270º, on 2 or 3 hinges each gate
- Door seal - imported TPE multi-leaf profile with anti-friction linings
- Door latches in open position
- Rod locks - steel, galvanized, one or two for each gate leaf
- External frame rounded, galvanized
- Marking - reflective tape around the perimeter of the van
Refrigerator.
To transport temperature-sensitive products, you can buy or order a refrigerated van on an Iveco Daily (sandwich van with a Zanotti or Global Freeze refrigeration and heating unit). Refrigeration and heating equipment (RHE) is selected individually. >>> More details about refrigerators
Tail lift.
To raise the transported cargo to the level of the van platform and lower it to the ground level, we can install a DHollandia tail lift (hydraulic lift) on the van. Iveco Daily sandwich van, it is recommended to install the Dhollandia DH-LM.10 tail lift. >>> More details about tail lifts
Additional options.
Upon individual order, the isothermal sandwich van on the Iveco Daily can be equipped with additional options:
- Van heater
- Strengthening walls
- Strengthening the platform
- Additional side doors
- Hatches for various purposes
- Aluminum flange
- Floor covering aluminum “Quintet”, plastic “Anthracite” or poured polyurethane with abrasive filler
- Welding the seams of the floor and flanging according to the “Trough” type
- Rings for securing the load to the floor
- Rigging rail
At Van-Auto, they will help you individually select and buy an insulated van made of sandwich panels or a refrigerated van on an Iveco Daily .
Russian package:
Front mudguards | + |
Cabin rear wall trim | + |
Crankcase gas exhaust with heating | + |
Daytime running lights (DRL) | + |
Bracket for installing a fire extinguisher | + |
First aid kit | + |
Emergency lamp | + |
Reinforced suspension (from model 40C) | + |
Heated electric mirrors | + |
Interface in Russian | + |
Electric windows | + |
Audio preparation | + |
Spare wheel bracket | + |
Spare wheel | + |
Warning triangle | + |
Refrigerated van based on IVECO Daily 50C15 chassis
9th generation ESP system (stabilization system) Hand (parking) brake Battery 110 Ah
Engine
Generator 150 A (12 V) Speed limiter 90 km/h Engine capacity 2998 cm3 Number of cylinders 4 Speed limiter 3500 rpm Engine model F1C Fuel type diesel Max. torque 350 Nm at 1400-3000 rpm
Cabin
Window in the rear wall of the cabin Digital tachograph Driver's seat adjustable in 3 directions Seat belts in standard color Standard panel Fabric seat upholstery Power windows Steering wheel with soft trim Indication of not fastened seat belt Instrument panel with service mileage Instrument panel in Russian Central locking (CL) ) with remote control (remote control) Audio preparation (antenna + 4 speakers) Standard seat with headrest Open storage compartment Smoker's package Double passenger seat with 3-point belts Heated and electrically adjustable outside rear view mirrors Cab width 2000 mm Standard steering wheel Front grille black Long side mirror brackets Internal upholstery of the rear wall of the cabin
Gearbox, PTO
6-speed manual transmission
A/M equipment
Spare wheel holder under the frame Standard frame Front mudguards Preparation for a fire extinguisher (bracket) Warning triangle Preparation for a 7 t towing hook Rear bumper Foot clutch First aid kit of the European standard Wheel chocks (2 pcs)
general information
Standard painting External noise according to Directive 92/97/EC Marking 3.0L EURO 5 Additional body reinforcement Crankcase gas exhaust with heating Left-hand drive for right-hand traffic IVECO badge 12-pin connector for connecting external electrical equipment Adaptation for Russia
Lighting and light signaling
Daytime running lights
Axles
Steel wheels Gear ratio 4.18
Suspension
Axle load 2100-3700 kg Maximum weight (GVW) 5t Semi-elliptic rear springs Standard front suspension
Compliance with legislation
Complies with national legislation of all EU member states (WVTA)
Fuel and air
Cabin fuel filler 100 l fuel tank Center exhaust system DPF filter Heated fuel filter Aluminum radiator
Tires
Spare wheel Tires 195/75R16
Add-on/conversion specification
Refrigerated van body
Overall dimensions, mm
Length: 4600 Width: 2200 Height: 2200
Purpose
Isothermal from monolithic sandwich panels
Insulation
polyurethane foam – HANSMAN (Holland)
Coefficient of thermal conductivity
0.39 W/m², density 70 kg/m3
Isothermal degree
High: platform panel thickness – 120 mm; side walls – 60 mm; front wall - 90 mm and roof - 90 mm; doors – 86 mm
External cladding
Clad metal 0.8
Internal lining
Clad metal 0.55
Floor
Inset sandwich - panel with transverse stiffeners made of plywood bars: - outer covering: one-sided laminated plywood S 9 mm - insulation: polyurethane foam - internal covering: laminated plywood
Front wall
- external covering: clad metal - insulation: polyurethane foam - internal covering: clad metal - reinforcements (mortgages): for installation of a refrigeration unit
Roof
— external covering: clad metal — insulation: sandwich panel: polyurethane foam. — internal covering: clad metal
Side walls
- external covering: clad metal - insulation: sandwich panels: polyurethane foam, - internal covering: clad metal
Body harness
— external: galvanized steel + synthetic enamel Procoat white — internal: galvanized steel
Back frame
Galvanized steel coated with Procoat synthetic enamel
Accessories
Galvanized: - 6 hinges, 2 locking rods (with cast locking knuckles) - fixing round rod handles with a protective cover
Van equipment
— door latches in the open position; — on the side walls the door impact protection is galvanized; — two rubber bumpers on the rear frame; — galvanized stairs between the longitudinal beams; — handrail on the right side; — plastic mudguards; — mudguard mounting brackets
Electrical equipment
— marker lights, side marker lights – 2 pcs. on each side - interior lighting - lighting in the roof panel - 1 pc.
Optional equipment
— Refrigeration and heating unit Carrier Viento 300 (cold/heat) — Heater Webasto EVO 40 — Fuel tank 100 l with installation
Chassis equipment:
IVECO 35C15 S/C | |
ABS + ASR + Electronic Stability Program (ESP) | + |
Generator 110A (12V) | + |
Chassis without superstructure | + |
Rear wall of the cabin without windows | + |
Driver's seat with three adjustments | + |
Exhaust in the center | + |
Multi-leaf rear springs | + |
Fuel filler neck on the cabin | + |
Standard heated fuel filter | + |
Fuel tank 70 l | + |
Standard stove | + |
Instrument panel "Comfort" | + |
12-pin connector for connecting external electrical equipment | + |
Standard key with immobilizer | + |
External rear view mirrors on short brackets | + |
2-person passenger seat with 3-point safety belts | + |
Gear ratio of the main pair 4.18 | + |
Rear bumper | + |
Seat upholstery - fabric | + |
Standard chassis color | + |
Forced speed limiter up to 160 km/h | + |
Standard steering wheel | + |