UAZ-31514 SUV (UAZ with a metal roof) in Moscow - sale and leasing

For questions regarding the purchase of this equipment (UAZ-31514 SUV (UAZ with a metal roof)), terms of credit and leasing, service and warranty, please contact the plant’s dealers or official representative offices. Delivery of the UAZ-31514 SUV (UAZ with a metal roof) can be carried out either directly from the manufacturer or from sites in Moscow and other regions of the Russian Federation.

For comfortable driving on all types of roads and off-road, the UAZ-31514 (31519) passenger car was produced with a metal roof and improved interior trim (standard equipment includes adjustable comfortable seats, soft upholstery, decorative trim, front wheel disconnect clutch "ELMO", "Kengurin" " and etc.)

You can choose a car with front spring suspension or leaf springs, with conventional axles or those equipped with wheel reduction gears, the so-called “military” axles. There are modifications with a ventilation hatch, a radio, with different levels of comfort (including “super-lux” 31519-080) - for every taste.

The car was equipped with one of 3 engines:

• carburetor produced by Zavolzhsky (ZMZ-402) or Ulyanovsk (UMZ-4178) motor plants with a capacity of 92 hp. (volume 2.445 l, installed on models of the 31514 family);
• so-called “three-liter” (power 98-100 hp, carburetor, volume 2.89 liters, installed on all types of UAZ-31519) UMZ-4218 (manufacturer - Ulyanovsk Motor Plant).

UAZ-31514 SUV (UAZ with a metal roof) in Moscow - sale and leasing

For questions regarding the purchase of this equipment (UAZ-31514 SUV (UAZ with a metal roof)), terms of credit and leasing, service and warranty, please contact the plant’s dealers or official representative offices. Delivery of the UAZ-31514 SUV (UAZ with a metal roof) can be carried out either directly from the manufacturer or from sites in Moscow and other regions of the Russian Federation.
For comfortable driving on all types of roads and off-road, the UAZ-31514 (31519) passenger car was produced with a metal roof and improved interior trim (standard equipment includes adjustable comfortable seats, soft upholstery, decorative trim, front wheel disconnect clutch "ELMO", "Kengurin" " and etc.)

You can choose a car with front spring suspension or leaf springs, with conventional axles or those equipped with wheel reduction gears, the so-called “military” axles. There are modifications with a ventilation hatch, a radio, with different levels of comfort (including “super-lux” 31519-080) - for every taste.

The car was equipped with one of 3 engines:

• carburetor produced by Zavolzhsky (ZMZ-402) or Ulyanovsk (UMZ-4178) motor plants with a capacity of 92 hp. (volume 2.445 l, installed on models of the 31514 family);
• so-called “three-liter” (power 98-100 hp, carburetor, volume 2.89 liters, installed on all types of UAZ-31519) UMZ-4218 (manufacturer - Ulyanovsk Motor Plant).

Lubricants and working fluids for UAZ vehicles

List of recommended lubricants, working fluids and substitutes for UAZ

Lubricants

1. motor oil
   M-8-V, GOST 10541-78 or M-6z/10-V (DV-ASZp-10V) OST 38.01370-84. Northern automobile oil M4z/6V1 OST 38.01370-84.
2. transmission oil
   TSp-15K GOST 23652-79. Substitute: automotive transmission oil TAP-15V or TAD-17I OST 23652-79. At temperatures below minus 20 °C, automotive transmission oil TSp-10 GOST 23652-79.
3. Lubricant
   "Litol-24" GOST 21150-87, "Lita" TU 38.1011308-90 or "Litol-24RK" (grease SHRUS-4 - an analogue of "Litol" with the addition of molybdenum disulfide and other additives that reduce wear)
4. Graphite lubricant
   USSA GOST 3333-80.
5. Grease
   CIATIM 201 GOST 6267-74, CIATIM-221 GOST 9433-80.

Working fluids

1. Coolant
   TOSOL-A40M, TOSOL-A65M TU 6-02-751-86 (use in winter OZH-40, OZH-65 GOST 28084-89 is allowed) or “Lena-40”, “Lena-65” TU 113- 12-11.104-88. The water is clean and “soft” (rain, snow, boiled).
2. Shock absorption fluid
   AZh-12T GOST 23008-78. Substitute: spindle oil AU OST 38.01.412-86.
3. Brake fluid
   “Tom” TU 6-01-1276-82, “Rosa” TU 6-55-37-90, “Neva” TU 6-01-1163-78, GTZh-22 TU 6-01787-75 (see . also opinions about different brake fluids)
4. Electrolyte
   with density, g/cm3: 1.25 - for areas with temperatures up to -10 ° C; 1.27 - for areas with temperatures up to -30 ° C; 1.29 - for areas with temperatures up to -40 ° C (see also the article “Battery”)
5. Gasoline
   A-76 GOST 2084-77, summer or winter grades.

up

Refueling data for wagon-type vehicles

Name

Car models

* It is possible to install only the main tank ** Including starting heater Engine 417 mod., 4-speed gearbox top

Standards for consumption of fuels and lubricants in road transport Р3112194-0366-97

approved by the Ministry of Transport of the Russian Federation on February 18, 1997. Valid until 01/01/2002) (Only basic figures, only in relation to UAZ vehicles. Full document: local copy from the Avto-Garant website)

Fuel consumption rates

The standards include the fuel consumption required to carry out the transport process. Installed for general purpose vehicles. basic rate in liters per 100 km of vehicle mileage.

Fuel consumption rates increase (including) under the following conditions:

• work in winter: in the southern regions of the country - up to 5%, in the northern regions of the country - up to 15%, in the Far North and areas equivalent to the Far North - up to 20%, in other regions of the country - up to 10% ( the maximum values ​​of winter allowances for almost all regions of central Russia are 10%, valid for 5 months a year);
• work in cities with a population of over 2.5 million people - up to 20%; with a population of 0.5 to 2.5 million people - up to 15%; with a population of up to 0.5 million people - up to 10%;
• when driving the first thousand kilometers with cars that have undergone major repairs and new ones, as well as. when driving such vehicles under their own power - up to 10%;
• for cars that have been in operation for more than 8 years - up to 5%;
• work in difficult road conditions during seasonal thaw, snow or sand drifts, floods and other natural disasters - up to 35%;

Fuel consumption rates are decreasing (including):

• when working on roads outside the suburban area made of cement concrete, asphalt concrete, paving stones, mosaics on flat, slightly hilly terrain (altitude up to 300 m) - up to 15%.

In the case when the car is operated outside a city with a population of more than 2.5 million people. in a zone up to 50 km from the city border, as well as for cities with a population of 0.5 to 2.4 million people. in an area up to 15 km from the city border and with a population of less than 0.5 million people. in a zone of up to 5 km, correction factors (increasing or decreasing) are not applied. If it is necessary to apply several surcharges simultaneously, the fuel consumption rate is set taking into account the sum or difference of these surcharges.

. For internal garage travel and technical needs. fuel consumption increases to 1.0% of the total; when vehicles are idle. in the winter and cold seasons with the engine running, set the standard fuel consumption at the rate of one hour of idle time corresponding to 5 km of vehicle mileage. For vans working on an hourly basis, the standard fuel consumption value is determined similarly to passenger cars, taking into account the surcharge for work with an hourly rate (10%).

Basic linear fuel consumption rate for vehicle mileage, l/100 km:

Lubricant consumption rates

Lubricant consumption rates are set per 100 liters of total fuel consumption, calculated according to the standards for a given vehicle. Oil consumption rates are set in liters per 100 liters of fuel consumption, lubricant consumption rates are set in kilograms per 100 liters of fuel consumption, respectively. Oil and lubricant consumption rates are reduced by 50% for all vehicles in use for up to three years. Oil consumption rates increase to 20% for vehicles that have been in operation for more than eight years.

Consumption rates per 100 liters of total vehicle fuel consumption for models UAZ-469, -3151, -452, -2206, -3962, -450, -451, -452, -3303, -3741, -450A, -451A, -374101 , 396201 of all modifications is: Engine oil 2.2 l Transmission oil 0.2 l Special oil 0.05 l Grease 0.2 kg

Source

Technical characteristics of UAZ 31514:

Filling volumes and brands of fuel and lubricants UAZ Hunter

1

votes: average:

1,00

Other parameters of UAZ 31514:

Data are presented in kilograms (kg)

Caution: the above data are official figures from manufacturers, however, please note that the information is for reference only and does not guarantee absolute accuracy.

Source

What oil should be used for UAZ Hunter

Original

For the UAZ Hunter SUV, semi-synthetic or synthetic motor oil is recommended. The viscosity of the lubricant depends on the operating conditions. For example, 10W-40, 10W-40 or 5W-40 are suitable for all-season use. When used in summer, 20W-40 or 25W-50 is recommended, and mainly in winter, 0W-30, 0W-40 or 5W-30 is used.

Unoriginal

For the UAZ Hunter SUV, you should use proven engine oil from a reputable manufacturer. Among the most famous brands are Kixx, Mannol, Shell, Valvoline, Motul, Castrol, Liqui Moly, Mobil and others. In addition, the API tolerance indicator, which is selected depending on the year of manufacture of the car and engine type, is important. For example, for a 2003 gasoline Hunter, all-season semi-synthetics with SAE 10W-30 viscosity and API-SJ approval are recommended. For cars manufactured in 2014, API-SM should be used, and for cars after 2015, the manufacturer recommends API-SM or SN. As for diesel engines, in this case the API-CG-4 and CJ-4 approvals for the 2003 and 2022 models should be considered. respectively. Below are the recommended motor oils for UAZ Hunter.

Also read: Engine oil for Volvo XC70 engine

For gasoline: Mobil 1 5W-30

For diesel engines: Agip 5W-40.

Technical characteristics of UAZ 31514

Operational characteristics of UAZ 31514

Maximum speed: 110 km/h Fuel tank volume: 78 l Vehicle curb weight: 1750 kg Permissible gross weight: 2500 kg Tire size: 225/75 R16

Engine characteristics

Position: front, longitudinal Engine capacity: 2450 cm3 Engine power: 76 hp Torque: 189/2200 n*m Power system: Carburetor Turbocharging: no Gas distribution mechanism: OHC Cylinder arrangement: In-line Number of cylinders: 4 Number of valves per cylinder: 2 Recommended fuel: AI-92

Brake system

Front brakes: Drum Rear brakes: Drum ABS: ABS

Steering

Power steering: Hydraulic booster Steering type: Worm gear

Transmission

Drive: Fully pluggable Number of gears: manual transmission - 4

Suspension

Front suspension: Solid beam axle Rear suspension: Solid beam axle

Body

Body type: station wagon Number of doors: 5 Number of seats: 7 Vehicle length: 4025 mm Vehicle width: 1785 mm Vehicle height 2022 mm Wheelbase: 2380 mm Front track: 1445 mm Rear track: 1445 mm Ground clearance (clearance): 220 mm

Source

How much oil to fill

First generation 31519, since 2003

The UAZ Hunter is an improved version of the 469 model, as well as the UAZ-3151. The car has an identical body with minor modifications. Among them are black window frames with rivets, a plastic trim on the radiator grille, sliding door windows, improved bumpers, and a one-piece tailgate. In 2019, Hunter received ABS and the Era-GLONASS module for the first time. Also for this model they began to offer Spicer axles as standard. Since 2003, Hunter has been equipped with a 16-valve ZMZ-409 engine with distributed injection and an electronic unit, but at the first stage of sales the car was offered with the older UMZ-421. Hunter was also produced for some time with the ZMZ-514 diesel engine.

Also read: Engine oil for Renault Arkana engine

Gasoline engines since 2003

• 2.7 112 l. With. (ZMZ-4091.13), oil volume - 7 liters, tolerance and viscosity: API-SJ, SH, SL, SM, SN; SAE 5W-40, 10W-40, 5W-30, 10W-30, 0W-40, 0W-30
• 2.7 128 l. With. (ZMZ-40905), oil volume - 7 liters, tolerance and viscosity: API-SJ, SH, SL, SM, SN; SAE 5W-40, 10W-40, 5W-30, 10W-30, 0W-40, 0W-30
• 2.7 135 l. With. (ZMZ-40906), oil volume - 7 liters, tolerance and viscosity: API-SJ, SH, SL, SM, SN; SAE 5W-40, 10W-40, 5W-30, 10W-30, 0W-40, 0W-30
• 2.9 84-104 l. With. (UMZ-4218.10; 4213), oil volume - 5.8 liters, tolerance and viscosity: API-SJ, SH, SL, SM, SN; SAE 5W-40, 10W-40, 5W-30, 10W-30, 0W-40, 0W-30

Diesel engines since 2003

2.2 113 l. With. (ZMZ-51432), oil volume - 5.5 liters, tolerance and viscosity: API-CG-4, CH, CH-4, CI, CI-4, CJ, CJ-4; SAE 5W-40, 10W-40, 5W-30, 10W-30, 0W-40, 0W-30

UAZ 31514

UAZ 31514 - photo 1

UAZ 31514 - photo 2

UAZ 31514 - photo 3

UAZ 31514 - photo 4

UAZ 31514 - photo 5

Lubricants and working fluids for UAZ vehicles

List of recommended lubricants, working fluids and substitutes for UAZ

Lubricants

1. motor oil
   M-8-V, GOST 10541-78 or M-6z/10-V (DV-ASZp-10V) OST 38.01370-84. Northern automobile oil M4z/6V1 OST 38.01370-84.
2. transmission oil
   TSp-15K GOST 23652-79. Substitute: automotive transmission oil TAP-15V or TAD-17I OST 23652-79. At temperatures below minus 20 °C, automotive transmission oil TSp-10 GOST 23652-79.
3. Lubricant
   "Litol-24" GOST 21150-87, "Lita" TU 38.1011308-90 or "Litol-24RK" (grease SHRUS-4 - an analogue of "Litol" with the addition of molybdenum disulfide and other additives that reduce wear)
4. Graphite lubricant
   USSA GOST 3333-80.
5. Grease
   CIATIM 201 GOST 6267-74, CIATIM-221 GOST 9433-80.

Working fluids

1. Coolant
   TOSOL-A40M, TOSOL-A65M TU 6-02-751-86 (use in winter OZH-40, OZH-65 GOST 28084-89 is allowed) or “Lena-40”, “Lena-65” TU 113- 12-11.104-88. The water is clean and “soft” (rain, snow, boiled).
2. Shock absorption fluid
   AZh-12T GOST 23008-78. Substitute: spindle oil AU OST 38.01.412-86.
3. Brake fluid
   “Tom” TU 6-01-1276-82, “Rosa” TU 6-55-37-90, “Neva” TU 6-01-1163-78, GTZh-22 TU 6-01787-75 (see . also opinions about different brake fluids)
4. Electrolyte
   with density, g/cm3: 1.25 - for areas with temperatures up to -10 ° C; 1.27 - for areas with temperatures up to -30 ° C; 1.29 - for areas with temperatures up to -40 ° C (see also the article “Battery”)
5. Gasoline
   A-76 GOST 2084-77, summer or winter grades.

Refueling data for wagon-type vehicles

* It is possible to install only the main tank ** Including starting heater Engine 417 mod., 4-speed gearbox top

Standards for consumption of fuels and lubricants in road transport Р3112194-0366-97

approved by the Ministry of Transport of the Russian Federation on February 18, 1997. Valid until 01/01/2002) (Only basic figures, only in relation to UAZ vehicles. Full document: local copy from the Avto-Garant website)

Fuel consumption rates

The standards include the fuel consumption required to carry out the transport process. Installed for general purpose vehicles. basic rate in liters per 100 km of vehicle mileage.

Technical characteristics of UAZ 31514

UAZ Patriot refueling tanks

The design of absolutely every modern car necessarily requires the presence of a power plant, tank, gearbox, and other units and various parts that have their own volumes. It is in these same volumes that diesel fuel is placed, as well as brake fluid, of course, gasoline or antifreeze, but all the fluids listed for each individual model are individual. We invite you to learn in detail about the filling tanks on the UAZ Patriot, which is popular in our country, plus we’ll look at what they essentially are and how much this car model requires to fill certain mechanisms.

Modifications of UAZ 31514

UAZ 315143

UAZ 315148

UAZ-3151 device, maintenance, diagnostics, repair

Replacing the coolant pump Remove the radiator of the cooling system. Remove the fan with viscous coupling. Remove the accessory drive belts. Using a 12mm wrench, unscrew the bolts securing the coolant pump pulleys. Remove the washer, outer and inner pump pulleys. Use pliers to loosen the hose clamps. Disconnect the heating system hose from the pump. Remove the tee along with the hoses. Unscrew the bolt securing the bar to the generator. Using a 13mm wrench, unscrew the nut securing the adjusting bar to the block. Remove the bar from the stud. Using a 13mm wrench or a high socket, unscrew the five nuts securing the pump to the cylinder block.

We remove the pump. Using a wrench or a 10mm socket, unscrew the bolt securing the pump cover. Using a copper hammer, carefully tap the pump cover and gasket. We clean the cylinder block and pump from the remains of old gaskets. Apply a thin layer of sealant to the new gaskets on both sides. We assemble and install the pump in the reverse order.

Replacing the coolant It is more convenient to work in the inspection ditch. We open the heater tap; if the cooling system is filled with water, it can be drained directly onto the ground. To do this, open the radiator tap and the tap on the cylinder block and drain the water from the cooling system. If the cooling system is filled with antifreeze, then it can only be drained into a container. Unscrew and remove the radiator and expansion tank caps. Remove the front engine mudguard. We put a hose of a suitable size on the radiator tap pipe, and opening the tap, drain the liquid into a container with a volume of at least 14 liters. We put the hose on the valve fitting of the cylinder block and similarly drain the liquid from the block. Using a 10mm socket, unscrew the nut of the clamp securing the expansion tank. Having removed the corrugated air intake hose from the radiator casing pipe, lift the tank to completely drain the liquid from its hose. Close all taps and install the expansion tank in place.

Fill the system with new coolant. We fill the cooling system through the radiator, and then replace the filler plug. Fill the liquid into the expansion tank to a level 3–4 cm above the “min” mark. Reinstall the expansion tank plug. After starting the engine and letting it run for 2-3 minutes, add fluid to the expansion tank, bringing its level to normal.

All filling capacities of the Patriot SUV

Everyone knows that filling tanks are units that require the presence of working fluid. By the way, the UAZ Patriot is equipped with two refueling tanks at once, and this allows the SUV to fill almost 2 times more fuel, almost up to 80 liters. Not all cars in this class can boast the same gas tank design.

The refueling volumes in the SUV we are considering are determined by the following parts and mechanisms:

• Auto clutch system;
• Transmission;
• Power unit lubrication system;
• Transfer case;
• Gasoline tanks;
• Power steering mechanism system;
• Window washer pump reservoir;
• Engine cooling system 409;
• Brake system;
• Carters of 2 bridges.