Gas C41r13 Fuel consumption per 100 km • With UMZ evotech engine

My seat is on the left

It should be said that Putin did not compliment GAZ’s new development unfoundedly, but based on personal impressions. Recently, Vladimir Vladimirovich, during a visit to the RusVinyl plant, had the opportunity not only to inspect Lawn-Next, but also to drive the new Russian truck. Familiarity with the units of the new Lawn and the aesthetic impressions obtained during the inspection of the truck’s exterior prompted the leader of our country to want to take part in the ceremony for the start of mass production of the model.

Gas C41r13 Fuel consumption per 100 km

Technical features:

The lift is equipped with additional supports at the front.

telescopic boom (main boom + 2 sections)

chain synchronization of sections extension;

Hydraulic hoses and wiring are routed inside the boom to protect against damage;

electro-hydraulic control from the operator's seat, from a remote control panel and from a cradle;

stopping the car engine from the cradle;

a device that ensures horizontal orientation of the cradle in space, hydraulic alignment of the cradle;

cradle dimensions 1400 x 700 x 1100 mm;

electrical insulation of the cradle up to 1000 V;

lift angle indicator;

load limiter;

a fully rotating column that allows the boom to rotate 360 ​​degrees without restrictions;

cradle with boom in transport position located at the rear of the vehicle

hour meter next to the outrigger control panel;

plastic chair at the operator's seat.

Description of the cabin and interior – Engine and its characteristics

As you can see, the technical characteristics of the new GAZon Next truck really meet the requirements of the time, and the vehicle itself will become a formidable competitor to foreign manufacturers, such as IVECO or Fiat. 400 TruckTractor 4×2 6L 400 12.78 16M 18.2D Freight liner FreightlinerCentury Conventional ST 120 6L 430 12.684 10M 23.6D FreightlinerColumbia CL120 6L 450 14.0 10M 24.4D Kenworth Kenworth T2000 6L 475 14.9 10M 22.7D Tatra Tatra T815-290N3T 8V 408 12.667 14M 29.4D.

Options © With UMZ evotech engine

My clear light • Onboard all-terrain vehicle KAMAZ-43118 6 6 with Hyundai HKTC HLC-8026 control unit.

Equipment Lawn Next

You can buy Lawn Next with the following changes:

• a power steering steering wheel is installed, which is indispensable on the road;
• the presence of a cruise control system, which helps to relax during a long journey;
• improved level of noise insulation, reduced amount of vibration when driving;
• ergonomic interior – when the necessary elements are placed at hand.

A special step is provided for quick and safe entry into the cabin. Trading House "GAZavto" recommends buying a new Lawn Next with the described basic equipment: air conditioning; central locking, interior heater, on-board computer and power windows.

The target audience

As of 2022, the Lawn Next machine has become popular among various categories of citizens, naturally used for personal purposes. But this truck is best suited for the needs of medium and small businesses.

In order not to pay more than the price and not have to wait up to 5 months for a car, Russian residents began to give preference to domestic manufacturers. After all, the car plant began to produce models that are not inferior in quality to brands like Hyundai (foreign). In this regard, the target audience has expanded significantly.

You can buy Lawn Next in Russia for the following purposes:

• transportation of goods weighing up to 5 tons (from 2022 up to 20 tons);
• transportation of products that do not require special storage conditions;
• moving office and apartment furniture.

Today, cargo transportation is a developing industry, so you cannot do without a good truck.

GAZon Next models

This brand is produced in two models, with different body types: extended (C41R31) and standard (C41R11) and two-row or seven-seater (C42R31). The latest model includes the ability to install a sofa in the back, which will become an excellent sleeping place. Such comfort allows the machine to be used in cargo transportation over long distances. The manufacturer has produced one cabin module for all GAZ trucks.

Basic equipment GAZon Next:

Equipment

Dealers offer several types of equipment: “Comfort 1” and “Comfort 2”. In the first case, the car will be installed:

• Power steering with adjustable column;
• on-board computer;
• electric windows.
• high-speed cruise control;
• engine speed controller;
• multimedia system.

Type “Comfort 2” includes all the above components, as well as pre-entry. engine heater.

The increased level of comfort and safety is due to good visibility, a modern braking system and a designed reserve for cabin deformation in an emergency. The driver's seat is complemented by a comfortable seat, an improved control system, etc.

Motor YaMZ-5344-20

The basis for the 10-ton GAZon-Next was the PAZ-320405-04 Vector-Next bus, which is produced by the Pavlovsk Bus Plant, which is part of the GAZ Group. The cross-section from oval has been replaced with a rectangular one, which, firstly, looks more aesthetically pleasing and this is an important factor for a tanker designed for urban operating conditions, and, secondly, there is space for placing additional equipment for the drum for the fuel delivery hose, a box for spare parts and accessories.

Cost and service

Regular service guarantee to avoid serious breakdowns. It is better to bring the car for service after every 20,000 km. A warranty is also issued for a period of 3 years or the first 150 thousand km.

Before choosing a car, you are naturally interested in: how much does Lawn Next cost? Some consumers compare the model with foreign analogues. The amount is formed based on various factors and depends on the configuration. For the basic version of gas lawn next, the price is set at 1,600,000 rubles.

Overall dimensions of the car GAZ Lawn-Next C41R31 Gasoline engine

• lifting capacity up to 6.2 tons
• volume of transported cargo up to 45 m³
• number of seats from 3 to 7
• fuel consumption from 13.6 l/100 km
• warranty 3 years or 150 thousand km
• Maintenance interval - 20,000 km
• spare parts are up to 10 times cheaper compared to foreign analogues
• guarantee against through corrosion - 8 years

Options • allowances for running-in vehicles that have undergone major repairs D 10; to work in quarry D 25.

GAZ Next C41R13 - technical specifications and description

The GAZon NEXT City model began production and went on sale in the spring of 2015; it was immediately appreciated by car enthusiasts due to its maneuverability and comfort. The vehicle's ground clearance is reduced due to the wheel diameter of 19 inches. In many respects, NEXT City is superior to its predecessor (Valdai) and foreign analogues. This is a very functional car at an adequate and attractive price, with a favorable cost of ownership. More than a hundred types of various special equipment can be created on the chassis of the new LAWN. The car can be equipped with 2 cab options (3 or 7 seats), several types of wheelbase and on-board platforms. The vehicle's carrying capacity is about 5 tons, the volume of the cargo compartment can range from 12 to 40 cubic meters. The car cabin is very spacious, with great visibility, and has all the necessary and modern requirements of the automotive industry. The driver's seat has several adjustment options, the cabin is equipped with a locking system, electric lifts, and an air conditioning system. A reinforced gearbox, power steering and spring suspension will definitely please the owner of the new LAWN. All components are from world-famous manufacturers, which makes LAWN NEXT City very reliable and modern. You will also be pleasantly surprised by the prices for servicing this vehicle: the service life of the truck has been increased, and the warranty on the vehicle has also been extended. All these characteristics make the new urban mid-ton truck extremely attractive.

There are three main types of NEXT City:

GAZ-C41R13 with a three-seat cabin and a standard wheelbase, GAZ-C41R33 also with a three-seat cabin with an extended wheelbase, GAZ-C42R33 with a two-row seven-seat cabin and an extended wheelbase.

Distinctive features and advantages of Next City Lawn

Unlike the base model LAWN NEXT, the City medium-duty urban vehicle has a smaller wheel diameter - 19 inches (R19.5) - in contrast to the standard model with 20-inch wheels (R20). Externally, the changes are little noticeable, but this parameter affects the maneuverability of the vehicle and is a huge advantage when organizing loading and unloading operations. In addition, vibration during movement is reduced, as well as the load on the transmission. GAZON City tires are tubeless, which makes balancing faster and easier.

Compared to its predecessor GAZ 33106 Valdai, the new LAWN NEXT City has a greater load capacity - 4870 kg, in contrast to 4075 kg of Valdai.

The cab design is also a distinctive feature of the truck. We wrote about it in more detail above; in addition, it is worth noting that in the modification with a seven-seat cabin, the second row of seats can be transformed into a berth.

Where to buy LAWN NEXT CITY

Auto managers will provide you with all the necessary information on the price and modification options for this truck, and, of course, will familiarize you with all the financial programs and promotions that operate in our dealership. Please note that we strive to create an individual approach to each client, so we will be happy to help in the implementation of all wishes regarding add-ons and modifications to GAZ vehicles.

Options and types of GAZon NEXT

Buying GAZ Next special equipment is a profitable decision given the best price of a domestic truck in its class, the cheapness of parts for Nizhny Novgorod cars and the most developed network of service centers in the country that service equipment produced at the Gorky Automobile Plant. All this is confirmed by statistics and experience!

The Next lawn, whose price is significantly lower than similar foreign-made trucks, is actively used as a chassis in the production of special equipment. Depending on the customer’s wishes, Lawn Next cars are equipped with a number of additional options, for example, a tachograph, pre-heater and others. But the main price of the truck is still determined by the type of superstructure (special equipment), the options for which are best discussed with the manager by phone. The base price of the LAWN NEXT chassis is determined by the wheelbase, cab type, and configuration.

Lawn Next - model features

Serial production began back in 2014.
Modern models contain some changes in various respects, in particular comfort and safety. Engineers used innovations, thanks to which they managed to create a vehicle that competes equally with imported trucks. In the price list for purchasing a Lawn Next car, the model range is presented in several types to choose from:

• board-awning;
• isotherm van;
• Eurovan;
• van wet;
• van with refrigeration equipment.

Thanks to the wide range of GAZ C41R13 series cars, you will not have any difficulties choosing the right option.

Description of the cabin and interior

The production and assembly of the machine was carried out in accordance with GOST. As a result of the assembly, the Lawn Next car rolled off the assembly line, which fully meets the established standards.

The shape of the cabin has a slightly pointed, angular appearance from the outside. However, this does not affect the interior. Inside, the trim is designed to enhance driver comfort. The cabin accommodates two passengers. A version with a double cab is also available - in this case there will be six seats, not counting the driver.

You can enter the cabin through large doorways. Maximum attention was paid specifically to driver comfort. As a result, the interior received a soft, adjustable chair. The seat offers a complete overview of the situation on the road. Wide side-view mirrors anticipate emergency situations.

Engine and its characteristics

Lawn Next modifications are due to different types of motors. Among them:

• Power unit YaMZ-53441. It is a powerful diesel engine. Equipped with a turbocharging and rapid cooling system. The engine weight is 470 kg, the power reaches 148 l/s, and the volume is 4.43 l. Installing such an engine is a logical solution for a car.;
• There are also models with a YaMZ-534 CNG engine. This is a modern and promising unit, developed at the plant in Yaroslavl. Such units run on liquefied gas and have 4 cylinders. The characteristics include: power – 170 l/s, torque reaches 750 N.m.
• Foreign alternative: Cummins ISF 3.8 E4R. The engine from the Chinese manufacturer has excellent performance characteristics - power 152 horsepower, volume - 3.76 liters. Runs on diesel.

The first and last options meet Euro4 standards, are environmentally friendly, and emit a minimal amount of waste into the atmosphere.

Car body: side with awning

The basic version of the car body is made of steel. The manufacturer also suggests using aluminum. This material is highly resistant to atmospheric conditions, which guarantees the absence of corrosion on the surface.

A massive radiator grille is installed in the front part. Fog lights are built into the metal bumper. Modernized turn signals and daytime running lights help highlight the decor. The wings are made of high-strength plastic.

Advantages of the new LAWN NEXT

For cars that comply with the Euro 4 environmental standard, the consumption is no more than 5, for the Euro 5 standard - no more than 6 and Euro 6 - no more than 7 of the amount of fuel consumed by the car. Adblue reagent consumption table. The municipal KO-C41R1 vacuum sweeper and vacuum cleaner on the GAZ-C41R13 chassis is designed for mechanized cleaning of city roads, asphalt and cement concrete surfaces, squares, airports from sand, dust, crushed stone, leaves.

Interior - Specifications

Loading is carried out sequentially from the upper platform; if necessary, you can use the auxiliary hydraulic winch located in the front of the car transporter. Modern electronic systems of the Lawn ABS, ASR, EBD worked extremely correctly, preventing it from spinning in an uncontrolled slide, but also did not intervene earlier than expected, as happens on many cars.

Features of a van in Nizhny Novgorod

A modern trench box allows you to secure the load more efficiently. Galvanized exterior upholstery with polymer paint reliably protects from snow and rain (all joints are sealed). The width of a regular platform is 2.2 m. But in some modifications it can be larger in order to easily fit two Euro pallets in a row.

• Load capacity is about 5,000 kg, which is slightly higher than that of previously released models.
• Extended versions available. Standard – 3.5 m, extended – 7.1 m.
• Components from world famous manufacturers CLIMATIC, Dakar, WABCO, etc. are used.

Description of the cabin and interior

The cabin is designed for 3 people. It is as comfortable as possible even for long-term cargo transportation thanks to:

• 1. Lots of space for drivers, passengers and luggage.
• 2. Increased noise insulation, reduced vibration load.
• 3. Spacious engine compartment, providing quick access for repairs.
• 4. Possibility of installing a behind-the-cabin sleeping bag.
• 5. Steering mechanism, supplemented by a hydraulic booster.

Car body: manufactured goods

The galvanized van is available in several colors. At the request of the customer, Lawn NEXT, manufactured goods sheathing can be insulated. The design allows for unhindered rear loading only.

The van has rear swing gates. The floor is made of plywood 2.7 cm thick. 3. The internal lining is reinforced with timber. 4. Models with top loading or with a sliding curtain on wheels are made to order.

Engine and its characteristics

A YaMZ-5344 engine is installed on the lawn next (manufactured goods van). It is equipped with turbocharging and a charge air cooling system. Engine power – 148 hp. The car on the highway can accelerate to speeds of up to 110 km/h.

Terms of purchase of GAZ-C41RB3 (GAZon-Next 10-ton truck):. Gasoline engine

Other recommended cranes:
• Palfinger RK 6500
• Palfinger RK 8500
• Palfinger PC 3800
• Fassi F 65A
• Fassi F 80A
• Hiab XS 066
• Hiab XS 077

All onboard vehicles with CMU:

• Onboard vehicle GAZon Next GAZ-C41R33 (4×2) with Unic UR-V374 manipulator
• Onboard vehicle GAZon Next GAZ-C41R11 (4×2) with Unic UR-V373 crane
• Onboard vehicle GAZon Next GAZ C41R33 (4×2) with cable manipulator Daehan NC 330
• Onboard vehicle GAZon Next GAZ-C41RB3 (4×2) with hydraulic CMU Hyva HB 100E2
• Onboard vehicle Gazelle Next GAZ-A22R32 (4×2) with hydraulic CMU Fassi M 30A
• Flatbed vehicle GAZelle GAZ-3302 (4×2) with Palfinger PC 1500A hydraulic control unit
• Fassi M 30A crane mounted on an onboard GAZelle GAZ-3302 (4×2) vehicle
• Onboard vehicle Valdai GAZ-331061 (4×2) with hydraulic CMU Fassi M 30A
• Onboard vehicle GAZelle GAZ-3302 (4×2) with a Fassi M 30A manipulator inside the side
• Onboard vehicle Gazelle Next GAZ A21R22 (4×2) with hydraulic CMU Fassi M 15A
• Onboard vehicle Gazelle Next GAZ-A21R22 (4×2) with a Fassi M 15A manipulator inside the side
• Onboard vehicle GAZon Yeger GAZ-33088 (4×4) with Hyva HA 28E3 hydraulic CMU on the rear overhang
• Onboard vehicle Gazelle Business GAZ-330252 with a Hyva HA 28 crane
• Onboard vehicle Gazelle Next GAZ-A21R22 (4×2) with Hyva HA 28 hydraulic CMU inside the side
• Onboard vehicle Gazelle GAZ-A22R33 (4×2) with a Hyva HA 28 crane
• Flatbed vehicle Gazelle Next GAZ-A21R22 (4×2) with a Hyva HA 15 crane inside the side
• Onboard vehicle Gazelle GAZ-330232 (4×2) with a double-row cabin and a Fassi M 30A CMU
• Gazelle Next GAZ A21R22 (4×2) flatbed car with Amco Veba 103 manipulator crane

• Onboard vehicle KAMAZ-65207 (6×4) with cable manipulator Hangil HGC 756
• Onboard vehicle KAMAZ-65117 (6×4) with cable mounted hydraulic control unit Hangil HGC 756
• Onboard all-terrain vehicle KAMAZ-43118 (6×6) with cable-mounted CMU Hangil HGC 756
• Onboard truck KAMAZ-65117 (6×4) with a cable mounted crane HKTC HLC-7016L
• Onboard all-terrain vehicle KAMAZ-43118 (6×6) with cable CMU HKTC HLC-7016L
• All-terrain vehicle KAMAZ-43118 (6×6) with Hyundai HKTC HLC-8026 control unit
• Special vehicle KAMAZ T2640 (6×4) with a cable-type CMU HKTC HLC-7016L and a multi-lift Unilift T26 NC
• Onboard all-terrain vehicle KAMAZ-43118 (6×6) with cable-operated CMU HKTC HLC-5013.4
• Flatbed vehicle KAMAZ-65117 (6×4) with hydraulic CMU Hyva HB 230E2
• Onboard vehicle KAMAZ-65117 (6×4) with Fassi F 275A hydraulic manipulator
• Onboard all-terrain vehicle KAMAZ-43118 (6×6) with Fassi F 215A hydraulic CMU
• All-terrain vehicle KAMAZ-43118 (6×6) with Palfinger PK 16001-KA CMU
• Onboard truck KAMAZ-65117 (6×4) with a Hiab X-CL 16 B-2 crane
• Onboard vehicle KAMAZ-65115 (6×4) with hydraulic CMU Hiab X-Duo 218B2
• Flatbed vehicle KAMAZ-65117 (6×4) with a Palfinger PK 18500A crane
• Onboard vehicle KAMAZ-65117 (6×4) with a Palfinger PK 18500A manipulator on the rear overhang
• Onboard vehicle KAMAZ-65117 (6×4) with hydraulic CMU Palfinger PK 23500A
• KAMAZ-65117 (6×4) flatbed vehicle with Palfinger PK 23500A CMU on the rear overhang
• Flatbed vehicle KAMAZ-65117 (6×4) with a Ferrari 148 A2 crane
• KAMAZ-65117 (6×4) flatbed vehicle with a Hiab XS 144B-3 CMU on the rear overhang
• Onboard vehicle KAMAZ-4308 (4×2) with hydraulic CMU Hiab XS 077B-2
• Flatbed truck KAMAZ-4308 (4×2) with Hyva HV77 E2 loader crane
• Onboard vehicle KAMAZ-4308 (4×2) with a hydraulic CMU Ferrari 571A2
• Onboard vehicle KAMAZ-65117 (6×4) with cable-operated CMU Soosan SCS 746L
• Palfinger PK 10000A crane mounted on a military all-terrain vehicle KAMAZ-53501 (6×6)
• Special all-terrain vehicle KAMAZ-53228 (6×6) with a Palfinger PK 8501A manipulator
• Onboard vehicle KAMAZ-43118 (6×6) with Kanglim 1256G-II CMU
• Onboard vehicle KAMAZ-65117 (6×4) with Kanglim 1256G-II CMU
• Flatbed vehicle KAMAZ-65117 (6×4) with a Hiab XS 144B-2 manipulator on the rear overhang
• All-terrain vehicle KAMAZ-43118 (6×6) with a CSS 106 cable crane
• KAMAZ 65117 (6×4) flatbed truck with Daehan NC 760+ manipulator crane
• Onboard vehicle KAMAZ-43118 (6×6) all-terrain vehicle with Daehan NC 760+ manipulator
• Flatbed truck KAMAZ-65117 (6×4) with cable manipulator Daehan NC 860

• Ford Cargo 2532 (6×2) flatbed truck with HKTC HLC-7016L crane
• Flatbed Ford Cargo 1832 (4×2) with cable manipulator HKTC HLC-7016L
• Ford Cargo 1832 (4×2) flatbed truck with Daehan NC 860 crane
• Flatbed vehicle FORD CARGO 2532 (6×2) with cable-operated CMU Daehan NC 760+
• Copma 870.6 crane mounted on a Ford Cargo 4136 (8×4) truck
• Ford Cargo 4136 (8×4) flatbed truck with Copma 810.6 manipulator crane
• Flatbed vehicle FORD CARGO 2532 (6×2) with Palfinger PK 16001-KA CMU
• Ford Cargo 4136 (8×4) flatbed truck with Copma 510.3 loader crane
• Flatbed vehicle FORD CARGO 2532 (6×2) with Kanglim KS 2056 CMU

• Onboard vehicle MAZ-6312C5 (6×4) with cable CMU HKTC HLC-7016L
• Onboard vehicle MAZ-6312B5 (6×4) with cable CMU Daehan NC 760+
• Onboard vehicle MAZ-6312V9 (6×4) with hydraulic crane Hyva HB 150E2
• Onboard vehicle MAZ-6312B5 (6×4) with Hiab XS 188B3 CMU on the rear overhang
• Palfinger PK 18500B crane with winch on an onboard vehicle MAZ-6312B5 (6×4)
• MAZ-6312B9 (6×4) flatbed vehicle with Palfinger PK 23500A hydraulic crane
• Onboard vehicle MAZ-6312B5 (6×4) with a Palfinger PK 15500A crane
• Flatbed vehicle MAZ-6312V5 (6×4) with a Kanglim KS 1256G-II crane

• Onboard all-terrain vehicle UAZ-390945 (4×4) with a Fassi M 30A crane

• Isuzu FVR 34 (4×2) onboard vehicle with INMAN IT 150 cable manipulator
• Isuzu FVR 34 (4×2) onboard vehicle with HKTC HLC-7016L cable manipulator
• Isuzu GIGA CYZ52 (6×4) onboard vehicle with Hyundai HKTC HLC-7016 cable-operated CMU
• Isuzu GIGA CYZ52Q (6×4) flatbed vehicle with Fassi F155A CMU on the rear overhang
• Flatbed truck Isuzu FVR 34 (4×2) with cable manipulator Daehan NC 760+
• Flatbed vehicle Isuzu FVR 34 (4×2) with cable CMU Daehan NC 860
• Palfinger PK 18500A loader crane on an onboard Isuzu FVR 34 (4×2)
• Flatbed truck Isuzu FVR 34 (4×2) with Palfinger PK 16001-KA automanipulator
• Isuzu FSR 90 (4×2) onboard vehicle with Palfinger PK 10000A hydraulic manipulator
• Isuzu NPR 75 (4×2) flatbed vehicle with Unic UR-V373 crane

• Palfinger PK 76002C crane on an onboard Hyundai HD 320 (8×4)
• Hyundai HD-78 (4×2) onboard vehicle with HKTC HLC-3015.4 cable-operated CMU
• HYUNDAI HD-78 (4×2) on-board vehicle with Palfinger PK 8500A hydraulic CMU

• JAC N120 (4×2) onboard truck with Hyva HB 60 E2 crane

• Onboard all-terrain vehicle Iveco AMT ML210 (6×6) with cable-operated CMU HKTC HLC-7016L
• Iveco AMT 633943 (6×4) onboard vehicle with HKTC HLC-7016L cable-operated CMU
• Flatbed vehicle IVECO EuroCargo ML180 (4×2) with Kanglim KS 1256G-II CMU
• Onboard all-terrain vehicle Iveco AMT 633944 (6×6) with Unic UR-1504F manipulator
• Onboard vehicle IVECO Daily 50C (4×2) with a double-row cab and Fassi F 50A CMU
• IVECO Daily 50C (4×2) flatbed vehicle with a double-row cabin and a Fassi M 30A CMU inside the side
• Flatbed vehicle IVECO Daily 45C (4×2) with a double-row cabin and a Fassi M 30A hydraulic CMU

• Flatbed vehicle MAN TGS 33.440 (6×4) with Palfinger PK 30002-KA CMU
• Flatbed vehicle MAN TGS 33.350 (6×4) with Palfinger PK 30002-KB CMU
• Flatbed vehicle MAN TGS 33.430 (6×4) with Palfinger PK 23500B CMU on the rear overhang
• Onboard vehicle MAN TGM 18.290 (4×2) with Palfinger PK 18500A manipulator

• Special vehicle Scania P360 (6×2) with a Hiab XS 144B-3 manipulator and a Multilift XP 18S hook loader

• Hino 700 (6×4) flatbed vehicle with HKTC HLC-7016L cable manipulator
• Palfinger PK 6500A manipulator on a Hino 300 (4×2) on-board vehicle

• Onboard vehicle AVIA D120 (4×2) with cable-operated CMU UNIC UR-V504