Characteristics of the onboard GAZelle Next
Characteristics (dimensions) GAZelle Next on-board standard
Characteristics (dimensions) GAZelle Next onboard extended
Specifications
| GAZelle Next (onboard) | A21R22 (short wheelbase) | A21R32 (long wheelbase) |
| dimensions | ||
| Length, width, height, mm | 5630x2068x2137 | 6709х2068х2137 |
| Wheelbase, mm | 3145 | 3745 |
| Ground clearance, mm | 170 | 170 |
| Front track, mm | 1750 | 1750 |
| Rear track, mm | 1560 | 1560 |
| Tire turning radius, m | 5,6 | 6,5 |
| Trunk volume, l | n/a | n/a |
| Engine Cummins ISF 2.8 | ||
| engine's type | 4-cylinder turbodiesel | 4-cylinder turbodiesel |
| Maximum power, hp | 120 at 3600 rpm | 120 at 3600 rpm |
| Maximum torque, Nm | 270 at 1400-3000 rpm | 270 at 1400-3000 rpm |
| Engine volume, l | 2,8 | 2,8 |
| Compression ratio | 16,5 | 16,5 |
| Cylinder diameter, mm | 94 | 94 |
| Piston stroke, mm | 100 | 100 |
| Weight | ||
| Curb weight MT/AMT, kg | 2060 | 2230 |
| Load capacity MT/AMT, kg | 1440 | 1270 |
| Transmission | ||
| type of drive | Rear | Rear |
| checkpoint | 5-speed manual transmission | 5-speed manual transmission |
| Dynamic characteristics | ||
| Maximum speed, km/h | 134 | 132 |
| Acceleration 0-100 km/h, s | n/a | n/a |
| Fuel consumption | ||
| Urban cycle, l/100km | n/a | n/a |
| Extra-urban cycle, l/100km | 10.3 (speed 80 km/h) | 10.3 (speed 80 km/h) |
| Mixed cycle, l/100km | n/a | n/a |
| Fuel type | Diesel | Diesel |
| Fuel tank volume, l | 70 | 70 |
Onboard vehicle Gazelle Next GAZ-A21R22 (4×2) with Hyva HA 28 hydraulic CMU inside the side
The Gazelle Next GAZ-A21R22 (4×2) onboard vehicle with a Hyva HA 28 hydraulic crane inside the side is designed to perform loading and unloading operations and transport light-tonnage cargo on general roads. This truck with CMU is often used for auxiliary transportation work with construction materials.
The maximum boom reach of the Hyva hydraulic manipulator allows you to work with loads located at a distance of 5.19 m from the crane column. The installation of the CMU was carried out inside the on-board platform, driven by a 12V hydraulic station. The crane has 3 hydraulically extendable boom sections and 1 with mechanical extension.
CMU Hyva - made in Holland CMU warranty - 12 months
Steel side platform: length - 4000 mm, height - 400 mm.
Vehicle delivery time: In stock Crane delivery time: In stock CMU installation time: 4-6 working days
Car price: On request The car price may vary depending on the configuration
Make a request
Technical characteristics of the onboard vehicle Valdai GAZ-A21R22
| Basic chassis: | GAZ-A21R22 |
| Wheel formula: | 4×2 |
| Total weight, kg: | 3 500 |
| Curb weight, kg: | 2 800 |
| Weight of transported cargo, kg: | 700 |
| Engine power, hp: | 150 |
| Body length, mm: | 4 000 |
| Crane diagram | Load capacity diagram of the Hyva HA 28 hydraulic crane |
Technical characteristics of the hydraulic crane Hyva HA 28:
| Load moment, tm: | 2,75 |
| Maximum load capacity, kg: | 2085 |
| Maximum reach, m: | 5,19 |
| Maximum working height, m: | 7,19 |
| Weight, kg: | 321 |
| Load capacity at maximum boom reach, m/kg: | 5,19 / 465 |
| Rotation angle, degrees: | 335 |
| Width of supports, m: | 2,8 |
| Supports: | 2 pcs. |
| Control: | From the ground, 1 remote control on one side |
| Number of hydraulic sections: | 3 + 1 mechanical |
- We provide the following services and documentation:
- We carry out installation, service and warranty repair of manipulator cranes (CMU, hydraulic manipulators) on our own and customer-supplied vehicle chassis.
- We issue a new PTS in exchange for the PShTS for registration with the traffic police.
- We issue a passport for an Automotive Crane Manipulator (AKM) for registration with ROSTEKHNADZOR of the Russian Federation.
Regarding the purchase of an onboard vehicle Gazelle Next GAZ-A21R22 with a Hyva HA 28 hydraulic CMU inside the side, please contact our specialists by phone or toll-free hotline 8-800-250-45-59, they will advise you on the cost of the vehicle with CMU, its characteristics and delivery times.
- Other recommended cranes:
- Palfinger PC 1500
- Palfinger RS 2700
- Palfinger PC 3800
- Fassi M 15A
- Fassi M 30A
- Hiab 026 T
- Hiab 033 T
- All onboard vehicles with CMU:
- Onboard vehicle GAZon Next GAZ-C41R33 (4×2) with Unic UR-V374 manipulator
- Onboard vehicle GAZon Next GAZ-C41R11 (4×2) with Unic UR-V373 crane
- Onboard vehicle GAZon Next GAZ C41R33 (4×2) with cable manipulator Daehan NC 330
- Onboard vehicle GAZon Next GAZ-C41RB3 (4×2) with hydraulic CMU Hyva HB 100E2
- Onboard vehicle Gazelle Next GAZ-A22R32 (4×2) with hydraulic CMU Fassi M 30A
- Flatbed vehicle GAZelle GAZ-3302 (4×2) with Palfinger PC 1500A hydraulic control unit
- Fassi M 30A crane mounted on an onboard GAZelle GAZ-3302 (4×2) vehicle
- Onboard vehicle Valdai GAZ-331061 (4×2) with hydraulic CMU Fassi M 30A
- Onboard vehicle GAZelle GAZ-3302 (4×2) with a Fassi M 30A manipulator inside the side
- Onboard vehicle Gazelle Next GAZ A21R22 (4×2) with hydraulic CMU Fassi M 15A
- Onboard vehicle Gazelle Next GAZ-A21R22 (4×2) with a Fassi M 15A manipulator inside the side
- Onboard vehicle GAZon Yeger GAZ-33088 (4×4) with Hyva HA 28E3 hydraulic CMU on the rear overhang
- Onboard vehicle Gazelle Business GAZ-330252 with a Hyva HA 28 crane
- Onboard vehicle Gazelle Next GAZ-A21R22 (4×2) with Hyva HA 28 hydraulic CMU inside the side
- Onboard vehicle Gazelle GAZ-A22R33 (4×2) with a Hyva HA 28 crane
- Flatbed vehicle Gazelle Next GAZ-A21R22 (4×2) with a Hyva HA 15 crane inside the side
- Onboard vehicle Gazelle GAZ-330232 (4×2) with a double-row cabin and a Fassi M 30A CMU
- Gazelle Next GAZ A21R22 (4×2) flatbed car with Amco Veba 103 manipulator crane
- Onboard vehicle KAMAZ-65207 (6×4) with cable manipulator Hangil HGC 756
- Onboard vehicle KAMAZ-65117 (6×4) with cable mounted hydraulic control unit Hangil HGC 756
- Onboard all-terrain vehicle KAMAZ-43118 (6×6) with cable-mounted CMU Hangil HGC 756
- Onboard truck KAMAZ-65117 (6×4) with a cable mounted crane HKTC HLC-7016L
- Onboard all-terrain vehicle KAMAZ-43118 (6×6) with cable CMU HKTC HLC-7016L
- All-terrain vehicle KAMAZ-43118 (6×6) with Hyundai HKTC HLC-8026 control unit
- Special vehicle KAMAZ T2640 (6×4) with a cable-type CMU HKTC HLC-7016L and a multi-lift Unilift T26 NC
- Onboard all-terrain vehicle KAMAZ-43118 (6×6) with cable-operated CMU HKTC HLC-5013.4
- Flatbed vehicle KAMAZ-65117 (6×4) with hydraulic CMU Hyva HB 230E2
- Onboard vehicle KAMAZ-65117 (6×4) with Fassi F 275A hydraulic manipulator
- Onboard all-terrain vehicle KAMAZ-43118 (6×6) with Fassi F 215A hydraulic CMU
- All-terrain vehicle KAMAZ-43118 (6×6) with Palfinger PK 16001-KA CMU
- Onboard truck KAMAZ-65117 (6×4) with a Hiab X-CL 16 B-2 crane
- Onboard vehicle KAMAZ-65115 (6×4) with hydraulic CMU Hiab X-Duo 218B2
- Flatbed vehicle KAMAZ-65117 (6×4) with a Palfinger PK 18500A crane
- Onboard vehicle KAMAZ-65117 (6×4) with a Palfinger PK 18500A manipulator on the rear overhang
- Onboard vehicle KAMAZ-65117 (6×4) with hydraulic CMU Palfinger PK 23500A
- KAMAZ-65117 (6×4) flatbed vehicle with Palfinger PK 23500A CMU on the rear overhang
- Flatbed vehicle KAMAZ-65117 (6×4) with a Ferrari 148 A2 crane
- KAMAZ-65117 (6×4) flatbed vehicle with a Hiab XS 144B-3 CMU on the rear overhang
- Onboard vehicle KAMAZ-4308 (4×2) with hydraulic CMU Hiab XS 077B-2
- Flatbed truck KAMAZ-4308 (4×2) with Hyva HV77 E2 loader crane
- Onboard vehicle KAMAZ-4308 (4×2) with a hydraulic CMU Ferrari 571A2
- Onboard vehicle KAMAZ-65117 (6×4) with cable-operated CMU Soosan SCS 746L
- Palfinger PK 10000A crane mounted on a military all-terrain vehicle KAMAZ-53501 (6×6)
- Special all-terrain vehicle KAMAZ-53228 (6×6) with a Palfinger PK 8501A manipulator
- Onboard vehicle KAMAZ-43118 (6×6) with Kanglim 1256G-II CMU
- Onboard vehicle KAMAZ-65117 (6×4) with Kanglim 1256G-II CMU
- Flatbed vehicle KAMAZ-65117 (6×4) with a Hiab XS 144B-2 manipulator on the rear overhang
- All-terrain vehicle KAMAZ-43118 (6×6) with a CSS 106 cable crane
- KAMAZ 65117 (6×4) flatbed truck with Daehan NC 760+ manipulator crane
- Onboard vehicle KAMAZ-43118 (6×6) all-terrain vehicle with Daehan NC 760+ manipulator
- Flatbed truck KAMAZ-65117 (6×4) with cable manipulator Daehan NC 860
- Ford Cargo 2532 (6×2) flatbed truck with HKTC HLC-7016L crane
- Flatbed Ford Cargo 1832 (4×2) with cable manipulator HKTC HLC-7016L
- Ford Cargo 1832 (4×2) flatbed truck with Daehan NC 860 crane
- Flatbed vehicle FORD CARGO 2532 (6×2) with cable-operated CMU Daehan NC 760+
- Copma 870.6 crane mounted on a Ford Cargo 4136 (8×4) truck
- Ford Cargo 4136 (8×4) flatbed truck with Copma 810.6 manipulator crane
- Flatbed vehicle FORD CARGO 2532 (6×2) with Palfinger PK 16001-KA CMU
- Ford Cargo 4136 (8×4) flatbed truck with Copma 510.3 loader crane
- Flatbed vehicle FORD CARGO 2532 (6×2) with Kanglim KS 2056 CMU
- Onboard vehicle MAZ-6312C5 (6×4) with cable CMU HKTC HLC-7016L
- Onboard vehicle MAZ-6312B5 (6×4) with cable CMU Daehan NC 760+
- Onboard vehicle MAZ-6312V9 (6×4) with hydraulic crane Hyva HB 150E2
- Onboard vehicle MAZ-6312B5 (6×4) with Hiab XS 188B3 CMU on the rear overhang
- Palfinger PK 18500B crane with winch on an onboard vehicle MAZ-6312B5 (6×4)
- MAZ-6312B9 (6×4) flatbed vehicle with Palfinger PK 23500A hydraulic crane
- Onboard vehicle MAZ-6312B5 (6×4) with a Palfinger PK 15500A crane
- Flatbed vehicle MAZ-6312V5 (6×4) with a Kanglim KS 1256G-II crane
- Onboard all-terrain vehicle UAZ-390945 (4×4) with a Fassi M 30A crane
- Isuzu FVR 34 (4×2) onboard vehicle with INMAN IT 150 cable manipulator
- Isuzu FVR 34 (4×2) onboard vehicle with HKTC HLC-7016L cable manipulator
- Isuzu GIGA CYZ52 (6×4) onboard vehicle with Hyundai HKTC HLC-7016 cable-operated CMU
- Isuzu GIGA CYZ52Q (6×4) flatbed vehicle with Fassi F155A CMU on the rear overhang
- Flatbed truck Isuzu FVR 34 (4×2) with cable manipulator Daehan NC 760+
- Flatbed vehicle Isuzu FVR 34 (4×2) with cable CMU Daehan NC 860
- Palfinger PK 18500A loader crane on an onboard Isuzu FVR 34 (4×2)
- Flatbed truck Isuzu FVR 34 (4×2) with Palfinger PK 16001-KA automanipulator
- Isuzu FSR 90 (4×2) onboard vehicle with Palfinger PK 10000A hydraulic manipulator
- Isuzu NPR 75 (4×2) flatbed vehicle with Unic UR-V373 crane
- Palfinger PK 76002C crane on an onboard Hyundai HD 320 (8×4)
- Hyundai HD-78 (4×2) onboard vehicle with HKTC HLC-3015.4 cable-operated CMU
- HYUNDAI HD-78 (4×2) on-board vehicle with Palfinger PK 8500A hydraulic CMU
- JAC N120 (4×2) onboard truck with Hyva HB 60 E2 crane
- Onboard all-terrain vehicle Iveco AMT ML210 (6×6) with cable-operated CMU HKTC HLC-7016L
- Iveco AMT 633943 (6×4) onboard vehicle with HKTC HLC-7016L cable-operated CMU
- Flatbed vehicle IVECO EuroCargo ML180 (4×2) with Kanglim KS 1256G-II CMU
- Onboard all-terrain vehicle Iveco AMT 633944 (6×6) with Unic UR-1504F manipulator
- Onboard vehicle IVECO Daily 50C (4×2) with a double-row cab and Fassi F 50A CMU
- IVECO Daily 50C (4×2) flatbed vehicle with a double-row cabin and a Fassi M 30A CMU inside the side
- Flatbed vehicle IVECO Daily 45C (4×2) with a double-row cabin and a Fassi M 30A hydraulic CMU
- Flatbed vehicle MAN TGS 33.440 (6×4) with Palfinger PK 30002-KA CMU
- Flatbed vehicle MAN TGS 33.350 (6×4) with Palfinger PK 30002-KB CMU
- Flatbed vehicle MAN TGS 33.430 (6×4) with Palfinger PK 23500B CMU on the rear overhang
- Onboard vehicle MAN TGM 18.290 (4×2) with Palfinger PK 18500A manipulator
- Special vehicle Scania P360 (6×2) with a Hiab XS 144B-3 manipulator and a Multilift XP 18S hook loader
- Hino 700 (6×4) flatbed vehicle with HKTC HLC-7016L cable manipulator
- Palfinger PK 6500A manipulator on a Hino 300 (4×2) on-board vehicle
- Onboard vehicle AVIA D120 (4×2) with cable-operated CMU UNIC UR-V504
