Full car body painting

The car body is a complex and multifunctional structure, subject to wear and mechanical damage and from time to time in need of professional repair. Conventionally, body repair is divided into diagnostics of body geometry, restoration of frame and cabin geometry, application of paint and protective coatings.

At the service center, body repairs of Foton, Hyundai and other cars are performed at the highest level. At the same time, close attention is paid to restoring the rigidity and geometry of the lower part of the body, usually hidden from the eyes of an outside observer. It is the lower body elements that are responsible for the driving characteristics of the vehicle and driving safety, since all the suspension elements of the car are attached to them.

Professional car painting in Moscow

Full body painting
in Nova Verta paint booth (Italy).
Enamels and varnishes from European manufacturers.
Computer color matching
.
Lifetime guarantee
on the quality and durability of the coating.
Free consultation
on the range of work and alternative methods, for example, car vinyl plywood.
Cozy waiting room
, cafe, free Wi-Fi.

The car is completely painted:

In case of multiple surface defects (dents, areas of corrosion, scratches).
If most body parts are replaced due to corrosion or an accident.
When detailed painting does not allow you to match the exact tone of the factory coating.
Before sale, to increase the intensity of the tint and, accordingly, the price of the car.
For styling a car to give it an unusual look and stand out from the crowd.

FOTON car painting centers

On this page we have collected the best body centers for painting FOTON cars.

Search for a car service

In order to finally decide on a body shop where this service will be provided, you should decide on the following questions:

Where will it be geographically convenient to perform this service?

Speaking of location, where the body shop is located is one of the factors influencing the choice of business. As a rule, the client’s choice will fall on a station that occupies a convenient position in relation to home or, as often happens, work.

what day
what time
at what price

According to the above points, you can choose a body center that will suit all parameters. In order to decide on a body center faster, contact the call center manager.

Prices for body painting FOTON

It is hardly possible to indicate exactly what the price of body painting for FOTON will be. To clarify this issue, contact one of the craftsmen who is better versed in pricing for painting materials and the service itself. Call the help desk of our portal and you will be switched to the required specialist.

When calculating the price of painting a FOTON body according to a special program, reinforcement, preparatory work and the cost of paint and varnish materials are taken into account.

As for the approximate price, you can find it by following the link below.

Benefits of full car painting

Beautiful view
from close distance. In the process of complete painting, it is possible to repair absolutely all damage, chips and cracks, get rid of rusty elements, tarnished and burnt areas.
Painting possible outside and inside
. At your request, we will also paint internal parts and surfaces - the engine compartment, doorways, interior, etc.
Lifetime warranty
on new coating. High-quality work and paints from the best manufacturers guarantee the flawlessness and durability of the new coating.

Maintenance card

In order for a Foton car to serve its entire operational life without breakdowns, it is necessary to carry out scheduled maintenance in accordance with the manufacturer’s map (regulations). If your new car is under warranty, then all maintenance must be performed exclusively at a dealer service in compliance with all manufacturer requirements. In our company you can undergo scheduled maintenance of a Foton car, regardless of the brand and current mileage.

Scheduled maintenance must be carried out after a certain vehicle mileage interval. A deviation of no more than 1,000 km is allowed, both in one direction and the other. During maintenance, our technicians check the performance of all systems, diagnose components and mechanisms, and inspect body parts. Consumables and technical fluids are also replaced in accordance with the manufacturer’s regulations (map). Timely replacement of consumables allows you to extend the service life of important units and also ensures their normal operation.

In accordance with the maintenance card, the first maintenance is carried out after 2000 km. Further, according to the plan, Foton cars must undergo maintenance every 10,000 km. During each of these maintenance services, the engine oil and oil filter must be changed. The gearbox oil is changed once every 50,000 km. Clutch and brake fluids are replaced at approximately the same frequency. Power steering fluid, rear axle oil, alternator drive belts, timing belt are changed in accordance with the maintenance card for a specific Foton model.

During each scheduled maintenance, our service center specialists are required to lubricate all suspension components, linkage joints, steering knuckles, wheel bearings, brake levers and other elements. Using modern equipment, the operation of the engine and gearbox is diagnosed, the running engine, rear gearbox, and driveshaft are checked for noise. The condition of the seals in the units is also checked for leaks.

Without fail, specialists check the tension of the timing belt and drive belts, measure the oil level in the gearbox, rear axle and transfer case. If the level drops significantly, more in-depth diagnostic work is carried out, the causes are determined and eliminated. The technicians also look at the coolant level in the engines and check its density.

Carrying out scheduled maintenance

The table below gives you the opportunity to have a complete picture of the work being performed.

Type of service	TO 1	TO 2	TO 3	TO 4	TO 5	TO 6	TO 7	TO 8	TO 9	TO 10	TO 11
Interval: x 1000 km	2	10	20	30	40	50	60	70	80	90	100
Replace
Engine oil and oil filter (every 6 months) (1)* (3)*	+	+	+	+	+	+	+	+	+	+	+
Transmission oil and breather cleaning (once a year). (3)*	+	+	+
Oil in the rear axle, cleaning the breather (once a year). (3)*	+	+	+	+	+	+
Replacement of the generator drive belt, tensioner roller, timing belt (for some models).	+
Air filter element (once a year). (2)*	+	+	+
Clutch and brake fluid (once a year). (3)*	+	+
Lubricating the gear selection mechanism (every six months)	+	+	+	+	+	+	+	+	+
Power steering fluid (power steering), steering gear (once a year).	+	+
Interval: x 1000 km	2	10	20	30	40	50	60	70	80	90	100
Coolant (every two years)	+	+
Fuel filters (once a year)	+	+	+	+	+	+
Filter drier for pneumatic system	+	+
Lubrication of suspension components, driveshafts, steering column, steering rod joints, steering knuckle pins, wheel bearings, brake levers, clutch and clutch fork shaft (every 6 months) (7)*	+	+	+	+	+	+	+	+	+	+	+
Check:
The presence of extraneous noise and knocking in operation: engine, clutch, gearbox, driveshaft, rear gearbox and suspension bearings.	+	+	+	+	+	+	+	+	+	+	+
Tightness of seals of components and assemblies	+	+	+	+	+	+	+	+	+	+	+
Condition of fuel lines	+	+	+	+	+	+	+	+	+	+	+
Presence of water in the fuel system sump and draining it	+	+	+	+	+	+	+	+	+	+	+
Turbocharger efficiency	+	+	+	+	+	+	+	+	+	+	+
Thermal clearances of engine valves, adjust (except for Cummins engines)	+	+	+	+	+	+	+	+	+	+	+
Condition and tension of drive belts, timing belt (for some models)	+	+	+	+	+	+	+	+	+	+	+
Oil level in the gearbox, transfer case, rear axle.	+	+	+	+	+	+	+	+	+	+	+
Engine coolant level and density	+	+	+	+	+	+	+	+	+	+	+
Interval: x 1000 km	2	10	20	30	40	50	60	70	80	90	100
Power steering piping system and power steering performance.	+	+	+	+	+	+	+	+	+	+	+
Fluid level: in the brake system, clutch, power steering system and steering gear. Leak diagnostics.	+	+	+	+	+	+	+	+	+	+	+
Condition of threaded connections of the chassis, suspension, transmission. (4)*	+	+	+	+	+	+	+	+	+	+	+
Condition of cabin locks and hinges	+	+	+	+	+	+	+	+	+	+	+
Condition and efficiency of parking and service brake systems: checking mechanisms, diagnosing the thickness of friction linings, diagnosing the internal diameter of the brake drum and adjusting the gap, the condition of actuators and valves.	+	+	+	+	+	+	+	+	+	+	+
Operation and efficiency of the mountain brake.	+	+	+	+	+	+	+	+	+	+	+
Condition of brake pipes and hoses.	+	+	+	+	+	+	+	+	+	+	+
Free play of the brake and clutch pedals. (1)*	+	+	+	+	+	+	+	+	+	+	+
Adjusting wheel alignment angles. (6)*	+	+	+
The operation and condition of the steering, play of the steering wheel and steering rod joints. (5)*	+	+	+	+	+	+	+	+	+	+	+
Condition and play of wheel hub bearings and clearance adjustment.	+	+	+	+	+	+	+	+	+	+	+
Interval: x 1000 km	2	10	20	30	40	50	60	70	80	90	100
Cardan shaft: diagnostics and lubrication (crosspieces, splined joints of the cardan and the bearing of the driveshaft suspension support).	+	+	+	+	+	+	+	+	+	+	+
Condition of anthers, protective covers.	+	+	+	+	+	+	+	+	+	+	+
The tightness and efficiency of the cooling system, the presence of leaks, the performance of the elements, the level and density of the coolant.	+	+	+	+	+	+	+	+	+	+	+
Condition of suspension elements: springs, shock absorbers, cabin and its lifting mechanism. Tightening the nuts securing the spring ladders of the front and rear suspension. (5)*	+	+	+	+	+	+	+	+	+	+	+
Condition of the exhaust system and engine air supply system. Diagnostics for leaks and absence of damage. Cleaning the air filter.	+	+	+	+	+	+	+	+	+	+	+
Tire pressure and tread wear (wheel rotation). Wheel studs and nuts - checking the tightening torque.	+	+	+	+	+	+	+	+	+	+	+
Electrolyte level and density, sound signal, windshield wiper operation, external lighting and alarm operation; operation of the starter, generator, air heating in the intake manifold, central locking, electrically heated mirrors, interior heating and ventilation systems, air conditioning	+	+	+	+	+	+	+	+	+	+	+
Interval: x 1000 km	2	10	20	30	40	50	60	70	80	90	100
Checking the direction of the headlight beam	+	+	+	+	+	+	+	+	+	+	+
Work at the diagnostic station
Diagnostics of the internal combustion engine control system, fuel equipment, ABS, SRS.	+	+	+	+	+	+	+	+	+	+	+

Maintenance

List of daily care work:

Check the presence of coolant in the engine cooling system.
Check the engine oil level.
Check the gearbox and drive axles for oil leaks.
Check for brake fluid.
Check the status of the battery indicator.
Check for fluid in the windshield washer reservoir.
Check the amount of fuel.
Check that all headlights and signal lights are working properly.
Check the condition of the wheels (including the spare) for wear and damage.
Make sure there are no leaks of fuel, oil, liquids from engine components and assemblies.
Adjust the rear view mirrors.
Check the clutch and brake pedals for proper operation and free play.
Check that the handbrake is functioning properly.
Check that all switches are functioning properly.
Check the clutch fluid level.
Check the fluid level in the power steering system reservoir.
Check that the steering and brake systems are in good condition.
Check the condition of the tool.
Check the condition of the moisture separator.

Full painting in several stages

We inspect my car in detail
and identify defects. We remove optics, bumpers, handles and other parts.
We straighten
the damaged elements, restore the geometry,, if necessary, perform welding work, and putty the dents.
We select the shade of car enamel
taking into account the personal preferences of the car owner. We degrease the painted surfaces with special products.
We prime in several layers
. The primer hides the transitions between putty and old paint, prevents corrosion, and ensures high adhesion.
We paint the car in the paint booth
, observing the drying temperature conditions, in almost sterile conditions.
We polish the body
with special pastes.

Preparatory procedures, how to paint correctly

If you decide to carry out all the repair work on your own, then you should do everything as soon as possible. Once you discover damage, do not delay the process, as the problem may get worse.

Once the scratch reaches the metal, the oxidation process begins, leading to rust and corrosion. Because of these defects, more serious work will be required.

Before painting, the car is cleaned using conventional detergents. You need to wait until the surface is dry and then degrease it.

For this, special wipes and solvent are used. After saturating one napkin with it, wipe the surface dry with the second. To ensure greater comfort, you need to remove the part that will be worked on.

All other areas of the body that cannot be painted are covered with protective film and masking tape.

To prevent painting defects from appearing, a special chamber is needed; the room must be completely clean of dust and other contaminants. Lights, like devices, should be directed toward the work surface to avoid glare.

Work should not be carried out outdoors, as exposure to sunlight will negatively affect the result. At high temperatures outside, only the first layer is subject to drying out; it will take longer to wait for complete drying.

Therefore, before applying a new layer, wait until the previous one dries.

Before spraying the can, you should shake it well. Try not to go overboard and cover up the rest of the components.

If you are not sure of the result, then you can try your hand at an old part that you have.

Don't forget to follow the existing instructions and stock up on the following tools:

paint,
sandpaper of different levels,
putty and primer,
antisilicon,
polyethylene,
masking tape,
elements for protection.

When doing all the work yourself, be sure to consider hand protection; use a rubber or silicone spatula so as not to cause unnecessary damage to the surface.

The work of the aerosol begins only after the primer has been applied, dried and polished.