The MKT-25.5 truck crane is designed to perform loading and unloading, installation and construction work, and is also used for large-scale assembly. The maximum weight of cargo that this model of equipment can lift is 25,000 kilograms. In addition to these works, the crane installation is capable of performing others.
For example, when equipped with a cradle lift, a truck crane is capable of lifting people and cargo with a total weight of 300 kilograms to a great height - this will allow it to perform some specialized tasks. Thus, having decided to buy MKT-25.5, you get a truck crane capable of performing a wide range of tasks, which will contribute to its all-season profitability and quick payback.
Usage
Domestic ones are adapted to local operating conditions and are considered quite unpretentious. This equipment is distinguished by good maneuverability and relatively small overall dimensions and can be easily moved even in dense traffic. The range of lifting equipment of this brand is represented by crane units on a three-, four-axle or special chassis. Ulyanovets truck cranes can be used on any construction sites, including those with poor road conditions. Depending on the expected operating conditions, the customer can choose the most optimal option.
If the access roads to the site are in poor condition, then it is advisable to opt for an all-wheel drive vehicle. Truck cranes on a chassis that does not have all-wheel drive are suitable for operation within the city - they are characterized by more economical fuel consumption and better driving characteristics.
Production
Back in Soviet times, the plant launched the production of powerful cranes with a lifting capacity exceeding 100 tons. Such equipment was adapted for installation work at a height of up to 100 m. The most powerful Ulyanovets crane with a lifting capacity of 250 tons was produced for use in heavy industry.
Today the plant is a leader in the production of Ulyanovets truck cranes, which are always in demand by construction organizations, thanks to:
- compact size, allowing easy maneuvering in traffic;
- economical fuel consumption;
- excellent driving performance, allowing you to work off-road;
- easy to operate and reliable design;
- a wide range of models from which the customer can always choose the right one;
- quite reasonable prices;
- availability of spare parts;
- excellent maneuverability;
- unpretentiousness in maintenance;
- adaptability to local conditions.
Design Features
The length of the boom of the truck crane allows you to lift the load to the height of a 7-story residential building. When using a nine-meter jib, the reach increases to 30 meters. “Chelyabinets” and “Galichanin” have similar indicators, but the working platform of “Ulyanovets” rotates 360 rather than 240 degrees.
The base vehicle is the Ural 4320, which is equipped with a YaMZ 236 engine with a power of 230 hp. Some design features that the MKT 25 Ulyanovets has are listed below:
- a boom of three sections, each of which is extended by a hydraulic cylinder;
- boom load limiter;
- voltage protection device when working near power lines;
- possibility of equipping with attachments (certified by the manufacturer).
The use of a jib is allowed if you need to lift a load weighing no more than 100 kg. Otherwise there is a risk of overloading the boom.
Specifications
It is known that Ulyanovets truck cranes have excellent technical characteristics that are not inferior to foreign ones:
- the equipment can be operated in a temperature range from -40 to +40 degrees;
- all models cover a working area of 360 degrees;
- load capacity, depending on the model, varies between 20-50 tons;
- the size of the support contour is proportional to the load capacity;
- crane installations are mounted on 2-, 3-, 4-axle and special chassis based on Kamaz, MAZ, Ural trucks;
- The cranes can also be mounted on foreign Ford or Volvo platforms.
Models
Each Ulyanovets truck crane model was developed to work in certain conditions, therefore it has its own load capacity, maneuverability and cross-country ability. Truck cranes mounted on a 4x2 or 6x4 chassis are convenient for working in city conditions and for traveling on regular roads. Their use will also save fuel. Working on hard-to-reach objects and off-road conditions will require an all-wheel drive truck crane.
MKT-20
The MKT-20 truck crane is designed to perform lifting work in urban conditions. The equipment is produced on a two-axle Kamaz or MAZ chassis and is distinguished by its mobility and functionality.
- This Ulyanovets truck crane has a lifting capacity of 20 tons.
- The length of the telescopic boom is 8-18 m, and the working area is 360°.
- The total weight of the crane with the main boom is 15.5 tons, and the travel speed is 60 km/h.
MKT-25
The Ulyanovets MKT-25 truck crane has a lifting capacity of 25 tons and a simple and reliable design and is one of the most popular models of such equipment. The weight of the loads lifted by the crane should not exceed 25 tons - for this purpose the equipment is equipped with a 22-meter three-section boom.
This series is characterized by the largest selection of models. Perhaps this is explained by the high demand for this particular load capacity, as well as constant design work to improve the reliability and quality of the technical device. A wide range of models of the MKT-25 series will allow each consumer to choose equipment that meets his requirements. When using jib, the lifting height of loads and the service area of the crane are significantly increased. At the same time, the production of this series is carried out using components from Europe or the USA. They are thoroughly tested for wear resistance.
It is also important to provide comfortable working conditions for the operator:
- a significant amount of glazing allows for increased visibility and accuracy of the operation;
- excellent sound insulation protects against extraneous sounds;
- the cabin is equipped with a heating and ventilation system;
- a comfortable chair reduces operator fatigue;
- the accessibility of all instruments ensures simplicity and ease of operation of the crane.
The crane's operating area is 360°.
It is possible to install jibs 6 or 9 m long, a drill (with a drilling depth of up to 3 m) or various hydraulic tools.
The boom radius is 2.3-19 m.
The crane is mounted on 3-axle platforms. It is used for installation of various structures, as well as in construction and loading and unloading operations.
MKT-25 models can be mounted on road or all-terrain chassis MAZ, KamAZ, Ural or KRAZ. European and American components are used in the production of this series.
The total weight of the equipment with the main boom is 20.4 tons.
The price for a truck crane of this model starts from 4.5 million rubles.
Control of the crane is quite simple; the working process is carried out using a hydraulic drive.
MKT-30
Ulyanovets MKT-30 truck cranes with a lifting capacity of 30 tons belong to medium-heavy equipment. MAZ, KamAZ or Ford Cargo with 3 axles can be selected as the chassis. The equipment is distinguished by a high level of productivity and cargo-height characteristics. Truck cranes of this series reach speeds of up to 90 km/h, which allows you to quickly cover the required distance from one object to another. The equipment is equipped with a powerful diesel engine.
MKT-40
The Ulyanovsk MKT-40 is equipped with a 4-section boom of 9-30 m, the winches are controlled by joysticks. A truck crane weighing 30 tons can move at a speed of 60 km/h on domestic or imported platforms.
- The length of the jib can be 6, 9 or 13 m.
- Work area – 360°.
- The winch is controlled using joysticks.
- The crane unit is mounted on a Ford or Volvo or Kamaz chassis.
- The speed of the truck crane is 60 km/h.
MKT-50
Taking into account the latest achievements in global crane construction, the MKT-50 model was developed. The boom lifting height is from 11 to 35 m. The crane installation can be equipped with an 8- or 14-meter jib.
This powerful equipment, with a lifting capacity of up to 50 tons, is designed to work in difficult conditions. Four-axle, including all-terrain, Kamaz, Volvo or Iveco chassis can be used as a chassis. The total weight of the truck crane is 40 tons. The cost of this truck crane is from 7, 8 to 9.5 million rubles.
The Ulyanovets MKT-50 crane is different:
- large support contour;
- sufficient margin of safety;
- powerful slewing bearing;
- four-axle or all-terrain chassis;
- boom reaching 35 m.
It is made of high-quality steel made in Sweden, and is lifted using cylinders.
Chassis
MKT-25.5 is mounted on an all-terrain chassis URAL 4320-1911 (6x6). The power unit is a diesel four-stroke (compression ignition) turbocharged engine of the YaMZ-236NE2 brand.
Its design allows for 50% efficiency when burning fuel, which allows for more efficient use of diesel, as well as increased power. The maximum power that this engine can produce is 230 horsepower.
The power unit is designed for operation at ambient temperatures from minus 60°C to plus 50°C, relative humidity up to 98% at a temperature of 25°C, air dust content up to 0.4 g/m3.
Thus, taking into account the all-terrain chassis, it becomes possible to operate the MKT-25.5 in almost all climatic zones.
