Beam crane 10t technical specifications

The drawing does not define the design of the crane.

1. Load capacity, t		10
2. Crane span L, m		4,5	7,5	10,5	13,5	16,5	19,5	22,5
3. Hook lifting height, m		6…36 (more on special order)
4. Dimensions, mm	Amin	2000			2600		4000
	Bmin	2640			3240		4700
	B1 max	180					230
	B2 min	depends on the type of electric hoist
	H1 max**	1020					1530
	H2 max	200
	H3 max	depends on the type of electric hoist
5. Crane operating mode group according to GOST 34017 (ISO 4301)		A3, A4, A5
6. Speed, m/min	lifting hoist	depends on the type of electric hoist
	movement of the hoist	depends on the type of electric hoist
	crane movement	12 (from 3 to rated speed - with installation of a frequency converter with smooth acceleration/deceleration functions)
7. Crane control		from the floor, radio control
8. Current supply		cable; open trolley; indoor trolley
9. Type of current and voltage		alternating - 380 V; 50 Hz
10. Total power of electric motors kW (max)*		For A3: 2x0.75 + electric power. electric hoist motors For A4, A5: 2x1.1 + electric power. electric hoist engines
11. Crane weight, t		5,1…9,5
12. Loads on the crane wheel, kN		66,9…77,23
13. Crane rail type	railway	R 24 GOST 6368-82
	special	Square 50 GOST 2591-88 St3 GOST 535-88
14. Climatic modification, placement category		U1, U2, U3
15. Ambient temperature, °C		-20…+40 (-40…+40)
16. Crane version		general industrial; fireproof; explosion-proof

*The total power of the crane will be no more than 10 kW, if you count on an electric hoist made in Russia or Bulgaria.
**Standard size shown. This size can be reduced upon customer request.

Technical characteristics of the 10t beam crane

Wide coverage of the working area, high speed and technical characteristics of the 10t beam crane allow you to perform a full range of lifting operations in production and warehouse premises.
Single-beam lifting equipment is used for work on construction sites, when loading and unloading railway cars and sea vessels.

Technical characteristics of a 10 ton beam crane depend on:

- type of bridge span structure: single-beam or double-beam,

- type of support: suspended or supporting,

— type of control: manual or electric.

The main characteristics of the 10 ton double girder electric overhead traveling crane include:

• Load lifting height.
• Span length – determines the width of the load.
• Travel speed of the undercarriage.
• Operating voltage.

Support crane beams are capable of lifting loads to a height of 6-18 meters. The structures, made to special order, can lift to a height of up to 36 meters. Suspended cranes lift loads from 6 to 36 meters.

The span is the operating area of ​​the load-handling device. For supporting structures this value varies from 3 to 28.5 meters. According to their structure, crane beams can be single-span or double-span.

The speed of movement of the undercarriage is from 0.4 to 1 m/s for support ones, 0.3-0.5 m/s for suspended ones.

All types of lifting and transport equipment operate from an electrical network with a voltage of 380V with a frequency of 50 Hz. Power supply is provided via a flexible cable.

The currently produced beam cranes are adapted to work in harsh weather conditions - the performance of most models in the usual version is maintained in the temperature range from -20 to + 20 degrees.

For the operation of lifting equipment in special areas, special cargo equipment is manufactured to special order.

In addition to the main structural elements, during the production of the crane mechanism, depending on the operating conditions and customer requirements, the following can be installed on it:

• Remote radio control.
• Brake buffers.
• Chemically protected, marine and tropical design.
• Micro speed for lifting and moving.

Finished structures are supplied with a package of documentation: production drawings, electrical control and power supply diagrams. The data contained helps to quickly troubleshoot and replace a damaged unit.

Custom manufacturing of electric overhead cranes single-girder support 10 t

Our company offers to manufacture to order (according to your technical characteristics and requirements), install and put into operation a 10t single-girder electric overhead overhead crane for open areas and premises.

The technological capabilities of the crane allow it to be used in production, warehouses and transport terminals, equipment repair and maintenance enterprises.

Electric support cranes are produced with a span length from 4.5 to 22.5 m with a lifting height from 6 to 36 m (more on special order). Depending on the operating conditions, we will manufacture a crane with an operating mode up to A5 standard - intensive use of the crane, as a rule, when working in two shifts, or when working in 3 shifts (rarely), and higher - on special order. There is also a choice of crane design according to its operating environment:

• general industrial (GPI);
• fireproof (FBI);
• explosion-proof (VZI);
• special (foundry, marine, tropical...)

The typical design of the crane supplied by our plant is in the form of an I-section, but a perforated I-beam, a reinforced I-beam, or a box-shaped structure can be used according to the technical specifications and the characteristics of your premises and operation.

If necessary, the beam crane is equipped with an electric hoist (rope or chain hoist made in Bulgaria, Russia or China), as well as additional options, for example:

• radio control from the operator's console;
• system of smooth inverter control of movement speed (frequency converters);
• installation of power trolls with boxes, fasteners, copper contact conductors (plates);
• load limiters to protect the crane from overloads and others.

Assembly to operational condition is carried out on site from the delivered machine kit. The customer is provided with a full package of documents and crane test reports.

You can order and buy an electric overhead support crane for 10 tons in a general industrial, explosion- and fire-proof design at the customer’s request. Our specialists are ready to provide professional advice on the choice of equipment and advise you on selecting the optimal option for specific operating conditions.

Support crane beam 10 t. (support crane beam 10 t.)

According to modern rules and regulations in the field of industrial safety, a 10-ton support crane beam (a 10-ton support beam crane) is not subject to mandatory registration with Rostechnadzor. The design of the crane beam manufactured by the UniTrade enterprise fundamentally implies the presence of two end beams , on which wheels, axle boxes, shafts, gear motors, bumpers and housings of electrical control cabinets, as well as a crane bridge or span beam and hoist are installed ( electric hoist ).
The hoist ensures lifting and lowering of the load, as well as movement to the left and right, and the beam crane itself moves the load along the entire workshop. The name "beam crane" means that the crane rests on the crane runway (as opposed to an overhead crane, which is suspended). As a rule, a steel square or rail is used as a crane runway, which in turn determines the number of flanges - the support crane beam has two flanges (suspended cranes use 1 flange or none at all). There are versions of support crane beams when the wheels of the support crane beam do not have flanges, but this is a special version for increased speeds. Rollers on bearings or highly wear-resistant bearings, which are located below the level of the raceway and act as flanges, are used as flanges for the wheels of crane beams with increased speeds. The distance between them is usually adjustable. Cranes with a similar design can reach speeds of up to 200 m/min. (compared to the standard version 20 m/min.

Request a commercial offer by phone. +7 (343) 219-21-47. We will answer quickly.

The support crane beam produced by UniTrade is painted, most often, in golden yellow color. Primer enamel provides anti-corrosion protection for the crane placement category U1 (outdoors, in the open air, under direct exposure to sunlight).

The housings of the electrical cabinets of the crane-beam support are installed with a degree of protection of at least IP54. The tensioning station is made of galvanized elements.

Crane beam with a lifting capacity of 10 tons. has the following standard technical characteristics and parameters (general industrial version):

Design features of the 10 t support unit

The base of the support unit, which is sold by the PTM company, is a load-bearing beam. It is fixed so that the plane is at an angle of 90 degrees to the floor surface. A controlled mechanism—a hoist—moves along the beam.

The operation of an overhead crane has three successive stages:

1. The load is captured and raised to a height.
2. The cargo is moved and unloaded at the required location.
3. The crane idles to return to the starting point of loading.

Suspended crane beams

The company's production is focused on the manufacture of suspended cranes of various lifting capacities 1, 2, 3.2, 5 and 10 tons in accordance with GOST 7890-93 and TU. The necessary equipment of modern and high-precision metalworking equipment allows us to produce composite components and assemblies strictly in accordance with design requirements and in the required time frame. Due to the wide geography of equipment supplies, we deliver equipment using a transport company convenient for the customer.

Our company sells lifting equipment throughout Russia and the CIS countries , fulfilling all the necessary procedures provided for by law, including the preparation of customs declarations. For the convenience of our customers, equipment can be delivered to the customer’s door.

Below you can see the drawing and characteristics of the crane you are interested in. cost of the equipment also indicated in the table.

Price of suspended electric single-girder, single-span crane (without electric hoist)

Characteristics and drawing of a suspended single-span crane beam

Load capacity 1t

1. Load capacity, t

2. Crane span Ln, m

3. Hook lifting height H, m

4. Length of consoles l, m

5. Number of the I-beam profile for the crane runway according to GOST 19425

depends on the selected electric hoist

7. Crane operating mode group according to GOST 25546-82 (ISO 4301/1-86)

9. Crane control

from the floor; radio control

Cable; open trolley;

11. Type of current and voltage:

alternating - 380 V; 50 Hz

12. Total power of electric motors (PV 40%), kW (max)*)

2x0.37 + 1.5 + 0.18 (2x0.18 at N.>9m)

13. Crane weight, t (max)

14. Load on one two-wheeled trolley during crane operation, kN (max)

15. Climatic version, placement category

16. Ambient temperature, °C

17. Crane version

*) These characteristics depend on the type of electric hoist being installed. The questionnaire indicates the characteristics of a standard hoist manufactured by B. Echo, R. Bulgaria

Main technical characteristics of the electric support crane beam

Load capacity 10t

1. Load capacity, t			10
2. Crane span Ln, m			4,5	7,5		10,5		13,5		16,5		19,5		22,5
3. Hook lifting height H, m*)			6…36
4. Dimensions, mm	A min		2000					2600				4000
	Bmin		2600					3200				4600
	B1 max		210
	B2 min*)		1300					1600				2300
	H1 max**)		780		855		1035	1155			1465
5. Crane operating mode group according to GOST 25546-82 (ISO 4301/1-86)			3K (A3)
6. Speed, m/s	lift*)		0,067*)
	movement of the hoist*)		0,33; 0,53*)
	crane movement		0,36
7. Crane control			from the floor, radio control
8. Current supply			Cable; open trolley; indoor trolley
9. Type of current and voltage:			alternating - 380 V; 50 Hz
10. Total power of electric motors (PV 40%), kW			2x0.75 + 8 + 0.37 (2*0.37 if Hunder>9m)
11. Crane weight, t			1,7		2,21		2,71	4,06	4,71		7,376		8,14
12. Crane wheel load, kN			61,595		63,84		71,535	75,47	78,965		92,895		96,07
13. Crane type rail		railway	R 24 GOST 6368-82
		special	Square 50 GOST 2591-88 St3 GOST 535-88
14. Climatic modification, placement category			U1, U2, U3
15. Ambient temperature, °C			-20…+40 (-40…+40)
16. Crane version			general industrial, fireproof

*) These characteristics depend on the type of electric hoist being installed. The questionnaire indicates the characteristics of a standard hoist manufactured by B. Echo, R. Bulgaria

**) Standard size shown. This size can be reduced upon customer request.

Crane support beam 10 tons is very often used in sea and river ports, railway stations, as well as in car repair shops. Depending on your requirements, we can offer you the following options: a beam crane for a garage, a beam crane for a loader, a beam crane for engine removal, a beam crane for a car service center, an industrial beam crane and many more different options.

The 10 ton beam crane has a number of advantages:

— affordable cost of construction;

— long service life;

— fast production times for equipment;

— the crane beam equipment is resistant to high and low temperatures;

- simplicity and reliability of the design.

A 10-ton beam crane can improve safety and reduce time wasted on loading and unloading operations.

Beam crane 10 tons price depends on the following indicators:

— additional equipment;

— technical characteristics of the equipment.

Price of a suspended electric two-span single-beam crane (without electric hoist)

Characteristics and drawing of a two-span suspended crane beam

Load capacity 1t

• Travel speed: 20 m/min;
• Operating mode: A3 (ISO 4301);
• Ambient temperature: from –20° to +40°С.

Additional options for the basic hoist package:

• Explosion-proof design;
• Fireproof design;
• Ambient temperature environments from –40° to +55°С;
• Operating mode A4, A5 (ISO 4301);
• A frequency converter;
• Soft start device;
• Travel brake;
• Radio control;
• Imported gear motors.

Load capacity 2t

• Travel speed: 20 m/min;
• Operating mode: A3 (ISO 4301);
• Ambient temperature: from –20° to +40°С.

Additional options for the basic hoist package:

• Explosion-proof design;
• Fireproof design;
• Ambient temperature environments from –40° to +55°С;
• Operating mode A4, A5 (ISO 4301);
• A frequency converter;
• Soft start device;
• Travel brake;
• Radio control;
• Imported gear motors.

Load capacity 3.2t

• Travel speed: 20 m/min;
• Operating mode: A3 (ISO 4301);
• Ambient temperature: from –20° to +40°С.

Additional options for the basic hoist package:

• Explosion-proof design;
• Fireproof design;
• Ambient temperature environments from –40° to +55°С;
• Operating mode A4, A5 (ISO 4301);
• A frequency converter;
• Soft start device;
• Travel brake;
• Radio control;
• Imported gear motors.

Electric support crane 10 t

Make a request

Overhead cranes are designed for lifting and moving cargo indoors or under a canopy at temperatures from -20C to +40C. Single-beam overhead overhead cranes move on rails located on fixed supports.

It is not allowed to operate the crane in explosive and fire hazardous environments, in rooms with high humidity in an atmosphere saturated with vapors of acids and alkalis.

SPECIFICATIONS

1. Load capacity, t

10
2. Crane span L m		4,5	7,5	10,5	13,5	16,5	19,5	22,5
3. Hook lifting height H, m		6…36
4. Dimensions, mm	Amin	2000			2600		4000
	Bmin	2640			3240		4700
	B1 max	180					230
	B2 min***	1075		1325	1650		2325
	H1 max	1020**					1530**
	H2 max	350
5. Crane operating mode group according to GOST 25546-82 (ISO 4301/1-86)		3K (A3); 4K(A4); 5K(A5)
6. Speed, m/s	lifting hoist	depends on the type of electric hoist
	movement of the hoist	depends on the type of electric hoist
	crane movement	0.35 (from 0 to 35 m/s - with installation of a frequency converter with smooth acceleration/deceleration functions)
7. Crane control		from the floor, radio control
8. Current supply		cable; open trolley; indoor trolley
9. Type of current and voltage		alternating - 380 V; 50 Hz
10. Total power of electric motors kW (max)*		For A3: 2x0.75 + electric power. electric hoist motors For A4, A5: 2x1.1 + electric power. electric hoist engines
11. Crane weight, t		5,1…9,5
12. Loads on the crane wheel, kN		66,9…77,23
13. Crane rail type	railway	R 24 GOST 6368-82
	special	Square 50 GOST 2591-88 St3 GOST 535-88
14. Climatic modification, placement category		U1, U2, U3
15. Ambient temperature, °C		-20…+40 (-40…+40)
16. Crane version		general industrial, fireproof

*The total power of the crane will be no more than 15 kW, if you rely on an electric hoist made in Russia or Bulgaria. **Standard size shown. This size can be reduced upon customer request. ***These characteristics depend on the type of electric hoist being installed. This table shows the characteristics of a standard electric hoist produced in Bulgaria (Balkansko ECHO plant).

ADDITIONAL OPTIONS FOR THE CRANE:

• frequency converter for crane movement;
• brake for crane movement;
• remote control with emergency stop;
• installation of imported components;
• ambient temperature Wednesdays up to -40 C;
• crane operating mode ISO 4301/1: 5K (A5), 7K (A7).

ADDITIONAL OPTIONS FOR ELECTRIC HOIST:

• crane version;
• radio control;
• load limiter;
• second brake for lifting;
• remote control with emergency stop;
• ambient temperature Wednesdays up to -40 C;
• ambient temperature Wednesdays up to +60 C;
• chemically protected design;
• tropical design;
• marine execution;
• operating mode FEM (3m, 4m);
• micro speed for ascent;
• microspeed for movement.

For prices and availability of products in stock, please check with our specialists by phone: +7 (499) 288-75-46 – mnc