Walk-behind tractors sold in Russia under the Carver brand are typical representatives of Chinese agricultural machinery. They are assembled in Perm by UralOptInstrument LLC, which also owns the Rezer and Parma brands.
Their design uses well-known solutions that allow, in the absence of a developed dealer and service network of the manufacturer, to service and repair them without much difficulty, guided by analogies with other Chinese walk-behind tractors.
The power units of Carver walk-behind tractors are familiar copies of Honda GX series engines, but their service life is usually less than that of “branded” Chinese engine manufacturers like Lifan or ZongShen.
see also
Comments 14
Guys, how do you define, CHINA, JAPANESE, AMERICAN... They all look the same, the difference is in the stickers... My snow thrower (China) has been working for 5 years without any complaints, and the motorized cultivator worked for a season on the ground in the summer, on snow and ice in the winter, both they work great... and are not expensive...
Mainly it's the price.
A copy of my Khoper engine, complete nonsense, the vibration at idle is transmitted right to the cart, this is the only negative, I installed it on my walk-behind tractor while I was repairing BRIGSS & STRATON, the repair cost 7500 rubles more than a new engine (5000 rubles)
Yes, it is similar to the Chinese, but there is one big problem, namely in Ukraine, for Chinese engines (as strange as it sounds), there are all sorts of fakes from the CIS countries and there are plenty of all sorts of basement workshops, I won’t specify specifically, but there are big manufacturers and in Ukraine and Russia that operate under a license from China, at the same time the price is many times higher than the original China, in my area, more than one hectare of Chinese motors have been tested, from companies such as Forte and Damask Veima, the last two are purely Chinese brands that are produced in Veima factory and, as expected, it is tested, so to speak, a factory product, although there are no complaints about other brands. They themselves have been using the Chinese motor on the MB1 for ten years, from transporting manure to mowing, in short, it performs all operations including a grain crusher, in short, so to speak, a pioneer in 2008, the word Chinese caused ridicule if you take a normal pure Chinese. Regarding the above, it is said that there are no sweaty or high-torque gasoline engines, all engines from 5 hp to 7.5 hp, have a maximum speed of 3600, they pull everything from the bottom, the crankshaft stroke and the crankshaft itself are the same everywhere, 5.5 hp 165 cc, 6, 5,190 cc, 7 hp, 200 cc, 7.5, 212 cc, because of the cylinder diameter, horses and torque increase; the brand of the company does not affect how the engine behaves.
I installed this one instead of the broken one, I had no desire to go through it, it’s been working for 5 years without any complaints
The cost of such a motor is not even the cost of its assembly, it is the quality of the metals from which it is assembled. The cheaper the metals and components, the cheaper the motor itself. If you need a “motor” for several seasons of work, or you rarely use a walk-behind tractor, then buy such a disposable motor.
But if you regularly and often work on a walk-behind tractor, then I advise you to buy either a Brigs & Stratton officially assembled in China, or a Honda engine assembled in Taiwan. By the way, there is a difference in the use of Honda and Briggs engines! Honda engines are high-quality and high-speed engines, they are good for mowing grass, as well as for quickly transporting not very heavy loads. But if you need to regularly plow the garden or cut the beds, then it is better to use low-speed, and more powerful Briggs! Briggs & Stratton also copes well with the transportation of wet and heavy manure, and with the transportation of heavy loads. I have verified all this from my own experience, so I am writing. A cultivator with a 5.5 liter Honda engine was also working in the garden. With. And now a walk-behind tractor with a Briggs&Stratton 6.5 hp engine is working in the garden.
Complete nonsense! A cascade walk-behind tractor, installed one of the cheap 6-5 hp motors. Working for the 5th season on 2 hectares to the fullest! This is milling and hilling.
The cost of such a motor is not even the cost of its assembly, it is the quality of the metals from which it is assembled. The cheaper the metals and components, the cheaper the motor itself. If you need a “motor” for several seasons of work, or you rarely use a walk-behind tractor, then buy such a disposable motor.
But if you regularly and often work on a walk-behind tractor, then I advise you to buy either a Brigs & Stratton officially assembled in China, or a Honda engine assembled in Taiwan. By the way, there is a difference in the use of Honda and Briggs engines! Honda engines are high-quality and high-speed engines, they are good for mowing grass, as well as for quickly transporting not very heavy loads. But if you need to regularly plow the garden or cut the beds, then it is better to use low-speed, and more powerful Briggs! Briggs & Stratton also copes well with the transportation of wet and heavy manure, and with the transportation of heavy loads. I have verified all this from my own experience, so I am writing. A cultivator with a 5.5 liter Honda engine was also working in the garden. With. And now a walk-behind tractor with a Briggs&Stratton 6.5 hp engine is working in the garden.
This is all lyrics, now there are quite a lot of good engines that are assembled in the same factories as famous brands, the Chinese don’t care what to copy or what to call them. Actually, Carver is a registered trademark or brand of a Perm company that has been on the market for several years and whose products I am familiar with firsthand. When the first Chinese Lifan engines went on sale, there was a lot of negativity about them, saying that China would fall apart in the first season, but whoever installed them on MB-1 walk-behind tractors was among the first, no one complained, and the engines are still alive.
The cost of such a motor is not even the cost of its assembly, it is the quality of the metals from which it is assembled. The cheaper the metals and components, the cheaper the motor itself. If you need a “motor” for several seasons of work, or you rarely use a walk-behind tractor, then buy such a disposable motor.
About company
The Carver brand belongs to Perm and became famous in 2009, when it launched a range of gardening equipment on the market.
The products have proven themselves well in the agricultural machinery market.
The Perm assembly of these units is distinguished by good quality, reasonable price, simplicity of design and interchangeability of most components.
The easy assembly of walk-behind tractors implies hassle-free service, ease of repair and debugging, even without using professional tools and without resorting to the services of specialized workshops.
The engines installed on walk-behind tractors are analogues of Honda GX series engines, therefore they work well in tandem with a gearbox.
Description
Russian history goes back only two decades. However, in this short period of time, a small company of several people has turned into a powerful enterprise that today produces dozens of types of products: heating and pumping equipment, engines and boat motors, lawn mowers and snow removal equipment, generators and compressor equipment, circular and chain saws, spare parts and consumables.
The company owns the famous brands Parma, CARVER, REZER. Dealer relations are associated with large companies, Minsk-Moto, Mogilevliftmash. Carver motor-cultivators and walk-behind tractors occupy a worthy niche in the company’s product segment.
The young brand CARVER, known since 2009, offers a wide range of garden equipment. The company has its own production of ignition systems. The engines are manufactured in accordance with the EPA EU-II standard, they are analogues of the Honda GX, the use of patented developments has reduced fuel consumption by 20% and significantly facilitated engine starting.
List of sources
- vsemotobloki.com
- stroy-podskazka.ru
- sadovij-pomoshnik.ru
- ProOgorod.com
Model range of walk-behind tractors
The Carver T-400 motor-cultivator is a lightweight small unit weighing 29 kg, equipped with a four-stroke 4 hp engine.
It does not have a gearbox; torque is transmitted through a belt to a worm gearbox.
The clutch is operated by adjusting the degree of belt tension.
The crankshaft is located vertically, which simplifies the design of the walk-behind tractor and reduces the cost of its production. Ideal for cultivation, plowing and other work in small areas.
The motor-cultivator is designed for cultivating the surface layer of soil (soil) on small plots of land using milling cutters. Not for use with cart
Specifications
| Engine model | 168FB-2 (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 196 |
| Maximum power, hp, (kW)/rpm | 4,0 (3,0)/3600 |
| Working width | 380 mm` |
| Tillage depth | 220 mm |
| Speeds | 1 forward, neutral |
| Clutch | Belt |
| Weight | 28 kg |
MT-650M
The Carver MT-650 walk-behind tractor has compact dimensions and a simple design, and is also effective in operation. Equipped with a 4-stroke engine with an operating power of 6.5 hp. and a volume of 196 cm3, using gasoline as fuel.
Can be used for mowing grass, as a snow blower, and also for processing soil of various densities.
It has 2 forward gears and a reverse, which increases its maneuverability.
The air oil filter copes well with dusty air.
The model is equipped with wheels size 4.00-8, which provide improved maneuverability. The gear reducer easily transmits torque from the motor to the wheels.
The unit weighs 105 kg, can process a row 80-120 cm wide, and can also go deep into the soil up to 35 cm.
The walk-behind tractor is designed for cultivating soil, mowing grass, removing snow (with the help of an additional attachment-snow blower) in small and medium-sized areas, as well as performing a transport function.
Specifications
| Engine model | ZONGSHEN XP140A (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 196 |
| Power at 3600 rpm | 4.8 kW / 6.5 hp |
| Fuel tank volume, l | 4,8 |
| Working width | 800-1200 mm` |
| Tillage depth | 100-350 mm |
| Speeds | 2 forward, neutral, 1 reverse |
| Clutch | Belt |
| Weight | 97 kg |
MTL-650
The Carver MTL-650 walk-behind tractor weighs 91 kg, which allows it to be used for cultivating soil without weights.
Equipped with a 4-stroke gasoline engine producing 6.5 hp, with a working volume of 196 cm3.
Thanks to the presence of tillers, the unit can plow the ground to a depth of up to 20 cm, be used as a snow blower, or transport loads using a trailer.
The device has 2 forward gears and one reverse gear, which significantly increases maneuverability.
Wheels on tubeless tires measuring 4.00-8 do not get stuck on wet ground, and a capacious 4.8-liter gas tank allows you to work for about 5 hours without refueling.
The processing width of a row can vary from 50 to 100 cm. The unit is equipped with an air-oil filter, which increases the service life of the motor, and also has a transport wheel for ease of movement.
Specifications
| Engine model | 168FB-2 (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 196 |
| Maximum power, hp, (kW)/rpm | 4.8 kW / 6.5 hp |
| Fuel tank volume, l | 4,8 |
| Working width | 500-1000 mm` |
| Tillage depth | 150-250 mm |
| Speeds | 2 forward, neutral, 1 reverse |
| Clutch | Belt |
| Weight | 83 kg |
MT-900
The CARVER MT-900 walk-behind tractor is a professional-level model, as it is equipped with a 9 hp engine.
Its significant weight of 141 kg allows it to be used without weights, and large pneumatic wheels can easily overcome off-road conditions.
The unit is equipped with reverse and two forward gears, thanks to which improved maneuverability is achieved.
Although it is worth noting that with such large dimensions as the MT-900, it is difficult to achieve effective maneuvering.
The plowing width varies depending on the amount of rototiller use. The launch is carried out manually, but additional effort on the part of the operator is not required.
Equipping with a power take-off shaft allows you to connect additional equipment.
Specifications
| Engine model | 177F (4-stroke petrol), OHV |
| Engine displacement, (cm. cubic meters) | 270 |
| Power at 3600 rpm | 6.5 kW / 9.0 hp |
| Fuel tank volume, l | 6.0 |
| Working width | 800-1200 mm` |
| Tillage depth | up to 350 mm |
| Speeds | 2 forward, neutral, 1 reverse |
| Clutch | Gears |
| Weight | 83 kg |
Types and models
The most popular models are Carver MT-650, Carver MT-900, Carver MC-650, Carver 900-DE. Let's take a closer look at the most popular walk-behind tractors of this brand.
This is a fairly light unit, its weight is 29 kg, the device runs on a four-stroke engine with a power of 4 hp. With. There is no gearbox; torque is transferred to the gearbox using a special belt. The clutch is activated by adjusting the belt tension level. The crankshaft is vertical, making the design simple and understandable, and the cost low.
Important Characteristics and dimensions of ambulance vans based on GAZelle vehicles
MT-650
The walk-behind tractor is compact and simple in design. The unit is very efficient, runs on a four-stroke engine, the potential power is 6.5 liters. m. Optimal for haymaking, clearing snow or cultivating soil of different types of hardness. It has two forward gears and one reverse, making it characterized by increased maneuverability. Air and oil filter The package includes 5 wheels, thanks to which the walk-behind tractor has high maneuverability. The weight of the device is 105 kg, the working width of the land row varies from 80 to 120 cm, and the plowing depth is 35 cm.
MTL-650
This is a fairly heavy walk-behind tractor weighing about 91 kg, so it can be used without special weights. The unit is equipped with a four-stroke engine running on gasoline, power – 6 liters. s., tank volume – 196 cm3. Equipped with a rotary cutter, it allows you to dig up the ground with a depth of 20-25 cm. It is also used for clearing the area of snow. The set includes a cart for transporting heavy loads. Has 2 forward speeds and one reverse. Wheels with tubeless tires do not get stuck in wet ground. The walk-behind tractor can work without interruption and refueling for 7-8 hours, while the width of the land varies from 50 to 110 cm. The system is equipped with an air-oil filter and a transport wheel.
MT-900
Carver MT-900 is a professional walk-behind tractor, reinforced with a 9 hp motor. With. The weight of the unit is 141 kg, so it works without any weights, and thanks to the wide pneumatic wheels it can easily overcome even severe off-road conditions. It has 2 forward and reverse transmission speeds, this significantly improves the maneuverability of the walk-behind tractor. The width of plowing the land can be different depending on the number of rotary cutters used; the start is done manually, and no special effort is required on the part of the operator.
Attachments
Due to the fact that Carver models are equipped with a power take-off shaft, it is possible to use various attachments, which not only expand the capabilities of the walk-behind tractor, but also simplify many works on the farm.
Below is a list of additional equipment that is used with Carver walk-behind tractors:
- A rotary mower is designed for cutting grass or trimming a lawn. As a result of the work, all the grass is folded into rows, which facilitates its further raking.
- Grousers are used when performing complex work such as plowing, hilling or harrowing. Moving the walk-behind tractor on loose soil is greatly simplified.
- A plow with a hitch is capable of not only digging up the ground, but also making even furrows, which can later be used for planting.
- Cultivators "Crow's feet" are non-separable equipment with a specific design. Used for weeding a large number of weeds.
- The trolley is used to transport various goods. A special feature of the model is the ability to fold down the side to facilitate loading and unloading.
- A potato digger is the most necessary equipment, which is purchased additionally, as it greatly facilitates the harvesting of root crops.
- The two-row hiller is used to create furrows when sowing various crops.
- The segment mower is designed for cutting grass on the lawn. As it moves, the landscape of the soil is repeated, which makes it possible to use it in areas with uneven surfaces.
General information and design features
Carver MT-900 is quite compact, and this allows it to work even in hard-to-reach places - due not only to its dimensions, but also thanks to special attachments. The universal flexible design of the walk-behind tractor supports a large number of attachments. Thus, the developers tried to satisfy the needs of every business executive so that he could be convinced of them not only in technical specifications, but also in practice.
Carver MT-900 is designed for various types of agricultural work, including mowing grass, harvesting crops and territories, and snow removal. Also available are types of work such as cultivation, plowing, planting and digging up root crops, hilling, and transporting loads up to 500 kg. All this is possible thanks to the support of mounted options, and in this regard this model is not inferior to most of its analogues.
Features of use
An important factor for extending the life of cultivators is timely maintenance.
The instructions for use provide a table according to which maintenance is carried out, including such operations as changing the oil, replacing the air filter, spark plugs, adjusting the gaps between the valve stem and the pusher, tensioning belts, etc.
When using the walk-behind tractor in dusty conditions, it is recommended to carry out more frequent maintenance and inspections.
Changing the engine oil is carried out while the engine is still warm, because otherwise not all the lubricant will leak out. A container is placed under the drain neck, the plug is turned out and the oil is drained by gravity.
Fill in a new lubricant only according to the manufacturer's recommendations: SAE 80W-90, SAE 85W-90 or similar.
It is advisable to dispose of used oil properly, namely by handing it over to a waste disposal service.
Preparation for long-term storage
If you plan not to use the walk-behind tractor for a long time, adhere to the following storage rules:
- The fuel needs to be drained.
- Clean the machine from dirt and adhering grass.
- Remove the spark plug and add 15 ml of engine oil, then install the spark plug in place.
- Pull the starter until resistance is felt. Continue pulling until the mark on the starter pulley aligns with the hole on the housing.
- Wipe all unpainted surfaces with a cloth lightly moistened with oil. This will prevent the occurrence of corrosion.
- Cover the walk-behind tractor from dust.
- Store in a dry and ventilated area.
Trouble-shooting
| Engine doesn't work | The ignition is not turned on; There is no fuel or oil, they may be out of date; No spark; Dirty air filter; |
| The engine stalls | The air damper or fuel valve is closed; The filter is clogged; Faulty spark plug. |
| Noise from gearbox | Bearing wear, which is better replaced with a new one; Deformation of sprocket teeth; Little lubricant or poor quality |
| V-belt slipping | Oil on belt or pulley; Weak belt tension; The belt is worn or deformed. |
For more information, please follow the link—>
Run-in
The cycle of procedures that are necessary for the successful operation of a walk-behind tractor is called running-in. It is usually carried out after purchase, while the walk-behind tractor is new, or after long-term storage of the unit.
The manufacturer strongly recommends running-in according to all the rules without neglecting it, since at this time the engine parts and large components of the unit are being ground in.
Features of operation, maintenance
Carver walk-behind tractors are distinguished by high-quality assembly and a reliable, well-thought-out design. According to reviews from owners, walk-behind tractor engines are characterized by good torque and long service life, but are demanding on fuel quality. Carver walk-behind tractors are equipped with tires of our own production; the main components are made in China and combine decent quality at an affordable price.
The manufacturer recommends using SAE 10W-30 engine oil and SAE 80W-90, SAE 85W-90 transmission oil. The first engine oil change is performed during break-in after 5 hours, then after 20 hours, then after 100 hours of operation. The oil in the gearbox is filled for the entire service life of the transmission; it is not changed, but only the level is monitored.
Also, before starting operation, it is necessary to pour oil into the oil bath of the air filter. They use high-quality gasoline, not lower than AI-92, it is necessary to control the fuel level - it should not exceed the red limit line.
The Carver walk-behind tractor must be stored in a dry place. Preservation for long-term storage involves performing certain works:
- drain the fuel completely
- clean the unit from dirt and dust
- unscrew the spark plug, pour 15 ml of engine oil into the cylinder, return the spark plug to its place
- turn the engine 2-3 turns
- treat control levers with silicone grease, unpainted surfaces with universal waterproof lubricants.
You can get acquainted in detail with the features of the device, safety rules, schedule of routine maintenance in the operating manual of the Carver MT-900 walk-behind tractor:
Run-in, first launch of Carver walk-behind tractors
To better grind in the main components and mechanisms, the Carver walk-behind tractor should be properly run-in. The machines go on sale without oil in the engine and gearbox. Therefore, before running in, the unit is filled with fuel, transmission and engine oil. Then start and warm up the engine for 10 minutes. This is followed by testing the operation of different gears and attachments in a gentle mode, no more than 2/3 of the power. After 10 hours, the running-in is considered complete.
Important: TOP 3 models of domestic assembly cranes based on MKT tractors
Major faults, repairs
Carver walk-behind tractors are distinguished by their rational, well-thought-out design and reliability. Malfunctions that arise during operation can often be caused by non-compliance with basic operating rules. If the engine does not start, there may be no gasoline in the tank or it is of poor quality, the fuel valve is closed, or the ignition is not turned on.
A clogged air filter and low oil level can cause the engine to stall after starting. Due to incorrect installation, the cutters may rotate when the clutch is disengaged. Defects and malfunctions can be avoided by following the manufacturer's instructions. Proper maintenance of the Carver walk-behind tractor is the key to its long-lasting operation.
Owner reviews
Owners of Carver walk-behind tractors note a weak protective structure and inconvenient placement of spark plugs. But in general, we can conclude that there are more positive emotions during exploitation than dissatisfaction.
Artem : “I really like the Carver MT-650 walk-behind tractor, as it allows you to quickly plow 50 acres of virgin land. However, the lump protection is very weak and quickly cracked. Difficult to shift gears, they don’t immediately go into place. If you tilt the walk-behind tractor, oil flows into the cylinders, which can lead to problems when starting. Among the advantages I would like to include the engine, which, despite all the difficulties, works properly.”
We invite you to leave a review if you are the owner of CARVER walk-behind tractors. The information you provide can help our readers choose a cultivator model.
The Carver walk-behind tractor belongs to the category of small agricultural equipment for individual use and public utilities. This unit was developed in Omsk, which has a harsh climate and unpredictable weather. It was for operation in such conditions that the Carver MT-900 walk-behind tractor and its modification MT-650 were created. The manufacturer has provided for the increased loads that the equipment will experience when operating on heavy soil, at high and low temperatures. The Carver 650 walk-behind tractor is assembled from components and mechanisms that have an increased safety margin. The highest quality materials and advanced technologies are used in its assembly. Engines for Carver walk-behind tractors were originally manufactured in Omsk.
Specifications
The Carver MT-650 and MT-900 products are delivered to retail outlets in Omsk assembled or packaged. Before leaving the factory, equipment undergoes multi-stage quality control. The completeness of the package, correct assembly and engine performance are checked.
The manufacturer declares the following characteristics of the Carver 900 walk-behind tractor:
- engine - gasoline, 4-stroke, air-cooled;
- working volume - 270 cm³;
- power - 9 hp;
- fuel tank capacity - 6.0 l;
- number of gears - 3 (2 forward, 1 reverse);
- clutch - gear with V-belt;
- power take-off shaft - through a belt and pulley;
- speed (forward and reverse) - 3.6/7.2 and 2.4 km/h;
- wheels - rubber with tread 5.00-12;
- starting - manually with a cord return mechanism;
- weight without additional equipment - 141 kg;
- soil tillage depth - up to 35 cm;
- working width - up to 120 cm.
All units are equipped with a coulter and cutters, which are used on motor cultivators. The packaging contains an instruction manual, which contains detailed instructions on the rules for using the product, its maintenance and storage.
You can expand the functionality of the walk-behind tractor by installing additional options that are purchased separately. Since Omsk is a large city, you can easily and quickly find additional equipment for a walk-behind tractor.
Snow blower Carver ST-550
The Carver snow blower ST-550 is very similar to the model described above, but with its own small features. The advantage of this option is its massiveness, which allows you to remove even settled and icy snow. The price will be slightly different from the previous one due to other features of the machine:
- Engine: 4 strokes.
- Power: 5.5 horsepower.
- Type of filling: gasoline (AI-92).
- Tank volume: 3.6 l.
- Start: manual.
- Type of movement: wheeled self-propelled.
- Snow throw: 10 meters.
- Weight: 57 kg.
- Housing: metal.
- Manufacturer: China (warranty – one year).
The Carver snow blower of this model, unfortunately, is a rather budget option, therefore it does not provide for autonomous power supply, lighting fixtures and rubberized handles with a heating element. However, due to its light weight, the snow blower can clear large volumes of snow in a short time.
List of additional options
The basic configuration of the unit makes it possible to loosen the soil and simultaneously remove weeds from it along with the roots. The capabilities of the machine allow you to turn it into a multifunctional mini-tractor with extensive capabilities. Almost all user reviews contain recommendations on the advisability of equipping the equipment with additional equipment.
The following options can be installed on the walk-behind tractor:
- Plow. The weight of the unit and a powerful motor create all the conditions for attaching a plow with 2-3 shares to the hitch, which makes it possible to plow a strip up to 100 cm wide. A single share is used when raising virgin soil, digging trenches and developing terrain for a foundation.
- Hiller. This is a very practical device with which beds are formed. As a result of treatment, more oxygen is supplied to the roots of plants, and excess moisture does not remain in them after rain. At the same time, weeds are removed between the beds.
- Various types of mowers. To mow hay, tops and weeds over a large area, it is better to use a rotary mower with a working width of 120 cm. With this device you can easily process up to 1 hectare per day. It is advisable to mow lawns in the yard using a trimmer.
- Devices for growing root crops. Agricultural workers speak positively about potato planters and potato diggers. The devices are rigidly fixed to the back of the walk-behind tractor, providing an immersion depth of up to 27 cm and a working width of 30 cm.
- Snow removal equipment. Using various types of canopies on Carver, the operator can quickly and efficiently remove snow from areas and paths, near gates, garages and fences. A rotary cleaner, a wide decoction and rotating hard brushes are used.
- Trailer devices. A cargo trailer or a combination trolley with seats for passengers can be attached to the walk-behind tractor. The power of the unit is enough to tow a trailer weighing up to 500 kg. To transport cargo through the snow, sleds made of polymer materials are used.
- Weights. In cases where the mass of the unit is not enough for reliable adhesion to the ground, special devices are used. Removable weights are attached to the axle shafts or to the body of the machine. Instead of wheels, you can install ground hooks weighing up to 70 kg and with a diameter of up to 60 cm.
The presence of several speeds allows you to choose the optimal operating mode for performing any kind of task.
Advantages of the Carver walk-behind tractor
Residents of rural areas appreciate this unit for its reliability and versatility. The walk-behind tractor ideally copes with the most difficult tasks that private farm owners have to solve.
The products have the following advantages:
- Multifunctionality. The power take-off shaft and hitch are ideally adapted to all mounted and trailed equipment of domestic and foreign manufacture. The engine can run on low-quality fuel and oil without loss of performance characteristics.
- High performance. The unit’s motor operates equally stably at extremely low and high temperatures. The large volume of the fuel tank makes it possible to work without interruptions for refueling. Large and wide wheels provide good maneuverability.
- Compactness. With a fairly substantial weight, the walk-behind tractor takes up little space. It can be transported in the trunk of a small car, stored in an outbuilding and on the balcony. The unit is maneuverable and easily passes between trees, along winding paths and in greenhouses.
- Ease of use. All controls are located on the handles. The steering wheel is adjustable in height and width. The equipment is stable on slopes and has a parking stop, which can be replaced with a third wheel when working with trailers.
- Easy to maintain. Run-in is carried out independently at low speeds for 7-8 hours. Further maintenance consists of changing the oil, gaskets and spark plugs, and cleaning off dirt and dust. All necessary spare parts are available in specialized stores.
- Safety. The operator is protected from stones and earth from under the wheels by durable wide plastic fenders. All components and mechanisms are covered with casings. The durable gear housing eliminates the possibility of damage due to impacts.
- The optimal combination of price and quality. Today, walk-behind tractors of the Carver brand have one of the lowest prices in the country. At the same time, the products are highly durable and reliable.
- Possibility of use as a stationary energy source. A branch crusher, a pump for pumping water and an electric generator with a power of up to 5 kW are attached to the power take-off shaft.
Today, purchasing a Carver walk-behind tractor with a set of options is a promising and cost-effective investment. The equipment pays for itself literally in one season, since the product is used almost every day, relieving the worker of hard manual labor.
User manual
After purchasing a device, you need to properly prepare it for use.
Therefore, it is important to follow the following recommendations:
- read the instructions included in the kit;
- inspect the appearance of the unit;
- check the oil, fill with gasoline;
- use the power button to start the mechanism.
Gasoline units are reliable, unpretentious helpers. Regular checks of shear bolts, fasteners, and auger gears can extend the life of the machine.
Particular attention should be paid to the condition of cables that are subject to rapid wear - they need to be lubricated with frost-resistant oils. If parts wear out, you can purchase the spare parts necessary for a specific model in specialized equipment stores.
