For questions regarding the purchase of this equipment (KS-55713-6K Klintsy truck crane on the MAZ-5337A2 chassis), terms of credit and leasing, service and warranty, please contact the plant’s dealers or official representative offices. Delivery of the KS-55713-6K Klintsy truck crane on the MAZ-5337A2 chassis can be carried out either directly from the manufacturer or from sites in Moscow and other regions of the Russian Federation.
The high speed of movement allows us to talk about the possibility of covering large distances with a truck crane and the indispensability of this model when working on dispersed objects. Reliability and stability of the MAZ chassis is the norm.
Description
KS-55713-6K - travels long distances
The KS-55713-6K automobile jib crane with a lifting capacity of 25 tons is mounted on the chassis of a MAZ-630303A3 vehicle.
Reliability and stability of the MAZ chassis is the norm.
The high speed of movement allows us to talk about the possibility of covering large distances with a truck crane and the indispensability of this model when working on dispersed objects. The chassis has excellent maneuverability and ease of control, which allows the crane to be used on sites with various types of access roads.
A large support contour (4.9 x 5.8), additional single file equipment with variable tilt geometry, a reliable chassis, a circular work area, five operating modes, the ability to work in cramped conditions - all this makes this model functional, highly productive and, as a result, the most in demand on the market.
Actuator drive
The crane installation is driven by an axial piston hydraulic pump, which is driven by the engine of the base vehicle through a gearbox and an additional power take-off.
The crane mechanisms have an individual drive with independent control from hydraulic motors and hydraulic cylinders.
The hydraulic system, based on imported components, allows for easy and smooth control of crane mechanisms with a wide range of speed control for working operations and the ability to simultaneously combine any crane operations.
Boom and telescoping system
A three-section telescopic boom with a length of 9-21 meters in the retracted position provides the crane with compactness and maneuverability when moving, and in the extended position it provides a wide working area and a greater height of movement of the load during operation.
The ability to telescope a boom with a load on a hook allows the crane to perform special tasks: installing loads in hard-to-reach places, carrying them among mounted structures.
Additional equipment expands the range of possibilities
Additional equipment of the boom with a lattice jib 7.5 meters long with the possibility of installation at an angle of 0 and 30 degrees relative to the boom allows for the largest service area and the size of the under-boom space. The transfer of the jib from the transport position to the working position and back is done manually without the use of additional lifting equipment.
Functionality and performance
Due to the large size of the support contour (4.9 x 5.8!!!), the crane can carry out work with loads in a 360-degree circular zone, which allows minimizing the number of rearrangements when working on site. Thus, the functionality and performance of this crane model on work sites significantly exceeds that of existing analogues.
For the convenience of working in cramped conditions, an operating mode is provided with the crane installed on supports with the outrigger beams retracted.
Load-bearing structures of optimal weight
The main supporting structures are welded from high-strength steel 10HSND, are as lightweight as possible, and have excellent rigidity characteristics.
All welded joints are made using semi-automatic and automatic welding equipment from domestic and European manufacturers, which ensures the highest quality of seams, which is documented after ultrasonic testing.
Truck crane reliability
Reliable operation of the truck crane is ensured by foreign-made components that do not require replacement or repair during the entire service life of the crane.
Truck crane safety
Safe operation of the crane is ensured by a complex of instruments and devices, including the load limiter of the crane ONK with a digital indication of operating parameters on the display in the crane operator’s cabin, which includes a built-in device for recording characteristics - a “black box” and a module for protecting the crane from dangerous voltage MZON for operation near power lines. The PMC automatically protects the crane from overload and capsizing, and is equipped with a coordinate protection system necessary for working in cramped working conditions near power lines.
Convenient crane operator workplace
The truck crane is equipped with a crane operator's cabin that meets the latest requirements for comfort and visibility: a compartment-type sliding door, a diesel heater, a fan, a folding rear hatch, and a convenient instrument panel.
Convenience of control of crane operations is achieved due to the original arrangement of control levers.
Guarantees
The crane's warranty period is 18 months or 1,000 operating hours in crane mode from the moment the crane is handed over to the consumer. The service life of the crane with 1.5-shift operation in certified mode is 10 years. Each crane is equipped with an individual set of spare parts for the base chassis and the crane installation.
Modifications KS-55713 Wedges with 24 m boom
Models KS-55713-1K-2, KS-55713-3K-2, KS-55713-5K-2, KS-55713-6K-2 have a three-section telescopic boom 10-24 m long and are additionally equipped with a lattice jib 7.5 long m with the possibility of installation at an angle of 0° and 30°. For the convenience of working in cramped conditions, an operating mode with the outrigger beams retracted is provided.
Specifications
| main characteristics of the crane | |
| Maximum load moment, t.m | 80,0 |
| Maximum load capacity, t | 25 |
| Boom length, m | 9-21 |
| Jib length, m | 7,5 |
| Jib installation angle, degrees. | 0 and 30 |
| Crane operating area, deg. | 250 and 360 |
| Maximum hook lifting height, m | |
| — with main boom 21 m | 21,6 |
| — with a main boom of 21 m and a jib of 7.5 m | 29,3 |
| Maximum depth of lowering the hook from the ground level with a boom of 9.0 m, reach of 5.0 m and 6-fold reeving of the rope, m | 13,0 |
| Minimum reach, m | 2,0 |
| Reach, maximum, m (For crane operating area 90°) | |
| a) “design” (no load) | 19,6 |
| b) “worker” (with a load on a hook) | 19,5 |
| Reach at maximum load capacity, m | 3,2 |
| Maximum load weight when telescoping, t | 6,0 |
| Maximum weight of cargo with which the jib crane is allowed to move, t | moving the crane with a load is PROHIBITED! |
| Maximum weight of cargo that can be handled in the accelerated mode of lifting and lowering with a winch, t | 4,5 |
| Operating modes | |
| 5 operating modes: | |
| in the working area 250° with the main boom (9-21m) on extended beams of retractable supports; | |
| in the working area 250° with the main boom (9-15m) on retracted beams of retractable supports; | |
| in the 360° working area with the main boom (9-21m) on extended beams of retractable supports; | |
| in the working area 250° with the main boom (21m) and a jib 7.5m on extended beams of retractable supports with a jib angle of 0°. | |
| in the working area 250° with the main boom (21 m) and a jib 7.5 m on extended beams of retractable supports with a jib angle of 30°. | |
| Crane geometric parameters | |
| Base, m | 3,81+1,40 |
| Track, m: | |
| - front wheels | 2,03 |
| — rear wheels (between the middles of the double slopes) | 1,79 |
| type of supports | retractable |
| Outrigger base, m | 4,9 |
| Size of the support contour along x across the chassis axis, m | |
| with extended support beams | 4.9 x 5.8 |
| with retracted support beams | 4.9 x 2.27 |
| Rear clearance, m | 3,015 |
| Turning radius (according to the main boom size), m | 10,05 |
| Overall dimensions of the crane in transport position, m | |
| length x width x height | 11.06 x 2.5 x 3.7 |
| Working movement speeds | |
| Load lifting and lowering speed, m/min | |
| — nominal with 6-fold rope reeving (with a load of 18.0 t) | 6,5 |
| — increased with 6-fold rope reeving (with a load of 4.5 tons) | 13,0 |
| — maximum with rope pulley multiplicity 1 (with a load of 2.0 t) | 40,0 |
| Load landing speed, m/min | 0,2 |
| Travel speed of the crane under its own power, km/h | 50,0 |
| Speed of the telescoping mechanism of boom sections (extension - retraction of boom sections), m/s (m/min) | 0,25 (15,0) |
| Turntable rotation speed, rpm | 0,96 |
| Time of full change of reach, s (min), at engine speed up to 1200 rpm: | |
| from maximum to minimum | 45 (0,75) |
| from minimum to maximum | 45 (0,75) |
| additional characteristics | |
| Elevation overcome by the crane, % (degrees): | |
| under its own power | 25 (14) |
| in tow | 18 (10) |
| Control method: | |
| swing frame mechanisms | hydraulic |
| outriggers | hydraulic |
| movement mechanism (chassis) | mechanical |
| Weight of the crane in transport position, t (including 2 people in the driver’s cabin, spare parts kit) Permissible deviation ± 1.5% | |
| main boom crane | 22,35 |
| crane with main boom and jib | 22,85 |
| Mass of the main assembly parts of the crane, t, not more than: | |
| crane installation | 12,85 |
| counterweight | 0,4 |
| arrow | 3,65 |
| goose | 0,45 |
| Load distribution along axes in transport position, kN (tf) Permissible deviation ± 1.5%: | |
| front axle | |
| main boom crane | 60,76 (6,20) |
| crane with main boom and jib | 63,70 (6,50) |
| rear trolley | |
| main boom crane | 158,27 (16,15) |
| crane with main boom and jib | 160,23 (16,35) |
| Maximum load on outrigger, t | 25,40 |
| Control fuel consumption in crane mode, l/h, no more | 13,00 |
| Refill containers: | |
| Hydraulic system (including hydraulic tank), l | 385 (240) |
| Heater fuel tank, l | 5,00 |
| Turning mechanism housing, l | 5,00 |
| Cargo winch gearbox, l | 11,00 |
| Operating temperature, degrees. | from -40° to +40° |
| general characteristics of the chassis | |
| Chassis type | MAZ-6303A3 |
| Axial formula | 1-2 |
| Wheel drive and control formula | 6 x 4 |
| Transmission type | mechanical |
| Steering system | steering mechanism of the “screw-nut on circulating hinges - rack-sector” type, power steering |
| Braking system: | |
| working - double-circuit with pneumatic drive ABS, divided into contours of the front axle and rear bogie, brake mechanisms of all wheels - drum | |
| parking - brake mechanisms of the wheels of the rear trolley driven by spring energy accumulators | |
| spare - one of the circuits of the service brake system or parking brake system | |
| auxiliary - gas-dynamic braking of the engine by a damper installed in the exhaust system | |
| Axle suspension system | spring with shock absorber |
| Tire size: | 11.00 R20 or 12.00 R20 |
| engine's type | YaMZ-6562.10 (Euro3) |
| four-stroke, diesel, turbocharged and intercooled | |
| Installed rated power at a frequency of 200 rad/s (1900 rpm), kW (hp) | 181,8 (247) |
| Specific fuel consumption, g/kWh | 223 |
| Fuel tank capacity, m3 | 0,2 |
| Cruising range, km | 700 |
| Permissible loads on bridges when moving, kN (t) | |
| To the front axles | 63,70 (6,5) |
| To the rear axles | 160,23 (16,35) |
| Chassis weight distribution, t: | |
| to the front axles | 45,08 (4,6) |
| to the rear axles | 45,08 (4,6) |
Load height characteristics
Click on the image to view a larger version:
Cargo characteristics
A) Load characteristics of the crane operating on retractable supports with 6 and 8 fold reeving of the rope, the beams of the retractable supports are fully extended, the crane is installed on the supports, the work area is 250°.
| Reach, m | Boom length, m | 9.0-15.0 (boom telescoping with a load on the hook) | 15.0-21.0 (boom telescoping with a load on the hook) | Crane operating area, degrees * | ||||||
| 9,0 | 9,0 | 12,0 | 15,0 | 18,0 | 21,0 | |||||
| Intermediate lifting capacity (on ropes), t | ||||||||||
| 2,0 | 25,0 | 18,0 | 6,0 | 3,0 | ±125 | |||||
| 2,5 | 15,0 | 6,0 | 3,0 | |||||||
| 3,0 | 13,8 | 6,0 | 3,0 | |||||||
| 3,2 | 25,0 | 6,0 | 3,0 | |||||||
| 3,5 | 21,5 | 10,0 | 6,0 | 3,0 | ||||||
| 4,0 | 18,4 | 18,0 | 13,8 | 6,0 | 3,0 | |||||
| 4,2 | 15,0 | 6,0 | 3,0 | |||||||
| 4,5 | 14,2 | 12,8 | 10,0 | 6,4 | 6,0 | 3,0 | ||||
| 5,0 | 14,2 | 14,2 | 12,6 | 11,6 | 9,75 | 6,0 | 3,0 | |||
| 5,5 | 6,4 | 6,0 | 3,0 | |||||||
| 6,0 | 11,0 | 11,0 | 10,0 | 9,3 | 8,2 | 6,2 | 6,0 | 3,0 | ||
| 7,0 | 8,5 | 8,5 | 8,0 | 7,5 | 6,8 | 5,6 | 6,0 | 3,0 | ||
| 7,5 | 7,6 | 7,6 | 6,0 | 3,0 | ||||||
| 8,0 | 6,6 | 6,25 | 5,8 | 5,05 | 6,0 | 3,0 | ||||
| 9,0 | 5,55 | 4,9 | 4,45 | 3,0 | ||||||
| 10,0 | 4,65 | 4,4 | 4,2 | 3,85 | 4,4 | 3,0 | ||||
| 10,5 | 4,3 | |||||||||
| 12,0 | 3,3 | 3,1 | 2,9 | 3,3 | 2,9 | |||||
| 13,0 | 2,9 | 2,9 | ||||||||
| 13,5 | 2,7 | 2,7 | ||||||||
| 14,0 | 2,4 | 2,25 | 2,25 | |||||||
| 16,0 | 1,9 | 1,8 | 1,8 | |||||||
| 16,5 | 1,8 | |||||||||
| 18,0 | 1,45 | 1,45 | ||||||||
| 19,5 | 1,2 | 1,2 | ||||||||
| Multiplicity of chain hoist, m | 8 | 6 | 8;6 | 8; 6 | 8; 6 | 8; 6 | 8; 6 | 8; 6 | ||
* From the crane position “boom back”.
Note:
- When the boom length increases over 9.0 m, the maximum lifting capacity of the crane decreases from 25.0 t to 15.0 t and lower depending on the boom length, which is controlled by the ONK-140 crane load limiter and limit switch.
- When you switch the reeving multiplicity button on the front panel of the load limiter to m=6, the load capacity is reduced to 18.0t.
- The mass of the hook suspension (0.28 t) and removable load-handling devices are included in the mass of the lifted load.
- When the crane operates with a jib fixed to the base of the boom in the transport position, the crane's lifting capacity is reduced by 0.23 tons, which is controlled by the load limiter.
- Operating modes of the load limiter of the ONK-140-R-00 crane.
B) Load characteristics of the crane operating on retractable supports with 6 and 8 fold reeving of the rope, the beams of the retractable supports are fully extended, the crane is installed on supports, the work area is 360°.
| Reach, m | Boom length, m | 9.0-15.0 (boom telescoping with a load on the hook) | 15.0-21.0 (boom telescoping with a load on the hook) | Crane operating area, degrees * | ||||
| 9,0 | 12,0 | 15,0 | 18,0 | 21,0 | ||||
| Intermediate lifting capacity (on ropes), t | ||||||||
| 2,0 | 15,0 | 6,0 | 3,0 | ±180 | ||||
| 2,5 | 12,0 | 6,0 | 3,0 | |||||
| 2,8 | 10,0 | 6,0 | 3,0 | |||||
| 3,2 | 15,0 | 6,0 | 3,0 | |||||
| 3,5 | 13,6 | 8,0 | 6,0 | 3,0 | ||||
| 3,6 | 12,0 | 6,0 | 3,0 | |||||
| 3,8 | 10,0 | 6,0 | 3,0 | |||||
| 4,0 | 11,9 | 10,4 | 8,0 | 6,0 | 3,0 | |||
| 4,5 | 8,5 | 7,5 | 4,4 | 6,0 | 3,0 | |||
| 5,0 | 8,3 | 7,1 | 6,35 | 5,6 | 4,4 | 6,0 | 3,0 | |
| 6,0 | 5,8 | 5,1 | 4,6 | 4,1 | 3,4 | 4,6 | 3,0 | |
| 7,0 | 4,2 | 3,8 | 3,5 | 3,1 | 2,7 | 3,5 | 2,7 | |
| 7,5 | 3,65 | |||||||
| 8,0 | 3,0 | 2,8 | 2,5 | 2,2 | 2,8 | 2,2 | ||
| 9,0 | 2,35 | 2,2 | 2,0 | 1,8 | 2,2 | 1,8 | ||
| 10,0 | 1,85 | 1,75 | 1,6 | 1,45 | 1,75 | 1,45 | ||
| 10,5 | 1,65 | |||||||
| 12,0 | 1,1 | 1,0 | 0,9 | 1,1 | 0,9 | |||
| Multiplicity of chain hoist, m | 8; 6 | 8; 6 | 8; 6 | 8; 6 | 8; 6 | 8; 6 | 8; 6 | |
* From the crane position “boom back”.
Note:
- The mass of the hook suspension (0.28 t) and removable load-handling devices are included in the mass of the lifted load.
- When the crane operates with a jib attached to the base of the boom in the transport position, the crane's lifting capacity is reduced by 0.23 tons, which is controlled by the load limiter.
- Operating modes of the load limiter of the ONK-140-R-01 crane.
B) Load characteristics with 8 and 6 fold reeving of the rope, the beams of the retractable supports are retracted, the crane is installed on the supports, the working area is 250°.
| Reach, m | Boom length, m | 9.0-15.0 (boom telescoping with a load on the hook) | Crane operating area, degrees * | |||
| 9,0 | 12,0 | 15,0 | ± 125 | |||
| Intermediate lifting capacity (on ropes), t | ||||||
| 2,0 | 6,0 | 1,0 | ||||
| 2,5 | 5,2 | 1,0 | ||||
| 3,0 | 6,0 | 5,2 | 3,5 | 1,0 | ||
| 3,5 | 3,5 | 1,0 | ||||
| 3,6 | 4,75 | 4,3 | 1,0 | |||
| 4,0 | 4,15 | 3,8 | 3,1 | 1,0 | ||
| 5,0 | 3,0 | 2,75 | 2,4 | 1,0 | ||
| 6,0 | 2,15 | 2,0 | 1,85 | 1,0 | ||
| 7,0 | 1,55 | 1,45 | 1,35 | 1,0 | ||
| 7,5 | 1,3 | 1,0 | ||||
| 8,0 | 1,05 | 1,0 | 1,0 | |||
| Multiplicity of chain hoist, m | 8; 6 | 8; 6 | 8; 6 | 8; 6 | ||
* From the crane position “boom back”.
Note:
- The mass of the hook suspension (0.28 t) and removable load-handling devices are included in the mass of the lifted load.
- When the crane operates with a jib attached to the base of the boom in the transport position, the crane's lifting capacity is reduced by 0.23 tons, which is controlled by the load limiter.
- Operating modes of the load limiter of the ONK-140-R-02 crane.
D) Load characteristics of the crane operation with a single reeving of the rope, boom length 21.0 m with a jib 7.5 m, beams of retractable supports are fully extended, the crane is installed on supports, work area 250°
| Reach, m | Intermediate lifting capacity (on ropes), t | Crane operating area, degrees * | |
| Tilt angle 0° | Tilt angle 30° | ||
| 7,0 | 2,00 | ± 125 | |
| 8,0 | 2,00 | ||
| 9,0 | 1,75 | 1,30 | |
| 10,0 | 1,55 | 1,20 | |
| 12,0 | 1,25 | 1,05 | |
| 14,0 | 1,05 | 0,90 | |
| 16,0 | 0,85 | 0,75 | |
| 18,0 | 0,70 | 0,65 | |
* From the crane position “boom back”.
Note:
- The mass of the hook suspension (0.04 t) and removable load-handling devices are included in the mass of the lifted load.
- Operating modes of the load limiter of the ONK-140 crane for a tilt angle of 0° - R-03;
- Operating modes of the load limiter of the ONK-140 crane for a tilt angle of 30° - R-04.
Altitude characteristics
A) High-altitude characteristics of the crane operation with 6 and 8 fold reeving of the rope, the beams of the retractable supports are fully extended, the crane is installed on the supports, the work area is 250°.
| Reach, m | Boom length, m | Crane operating area, degrees * | ||||
| 9,0 | 12,0 | 15,0 | 18,0 | 21,0 | ||
| Lifting height, m | ||||||
| 2,0 | 9,8 | ± 125 | ||||
| 2,5 | 12,8 | |||||
| 3,0 | 15,8 | |||||
| 3,2 | 9,2 | |||||
| 3,5 | 9,1 | 18,8 | ||||
| 3,8 | 12,3 | |||||
| 4,0 | 8,7 | 12,2 | 15,5 | |||
| 4,5 | 11,9 | 15,3 | 21,6 | |||
| 5,0 | 7,9 | 11,8 | 15,0 | 18,3 | ||
| 6,0 | 6,7 | 10,9 | 14,5 | 17,9 | 21,1 | |
| 7,0 | 5,0 | 10,1 | 13,9 | 17,4 | 20,7 | |
| 7,5 | 3,0 | |||||
| 8,0 | 9,1 | 13,2 | 16,8 | 20,3 | ||
| 9,0 | 7,6 | 12,4 | 16,2 | 19,7 | ||
| 10,0 | 5,6 | 11,3 | 15,5 | 19,1 | ||
| 10,5 | 3,2 | |||||
| 12,0 | 8,4 | 13,6 | 17,7 | |||
| 13,0 | 5,8 | 12,4 | ||||
| 13,5 | 3,3 | |||||
| 14,0 | 11,0 | 15,8 | ||||
| 15,0 | 9,2 | |||||
| 16,0 | 6,6 | 13,4 | ||||
| 16,5 | 3,5 | |||||
| 18,0 | 9,8 | |||||
| 19,5 | 3,7 | |||||
* From the crane position “boom back”.
B) High-altitude characteristics of the crane operation with 6 and 8 fold reeving of the rope, the beams of the retractable supports are fully extended, the crane is installed on supports, the work area is 360°.
| Reach, m | Boom length, m | Crane operating area, degrees * | ||||
| 9,0 | 12,0 | 15,0 | 18,0 | 21,0 | ||
| Lifting height, m | ||||||
| 2,0 | 9,8 | ± 180 | ||||
| 2,5 | 12,8 | |||||
| 2,8 | 15,9 | |||||
| 3,0 | 15,8 | |||||
| 3,2 | 9,2 | |||||
| 3,5 | 9,1 | 18,8 | ||||
| 3,6 | 12,4 | |||||
| 3,8 | 12,3 | |||||
| 4,0 | 8,7 | 12,2 | 15,5 | |||
| 4,5 | 11,9 | 15,3 | 21,6 | |||
| 5,0 | 7,9 | 11,8 | 15,0 | 18,3 | ||
| 6,0 | 6,7 | 10,9 | 14,5 | 17,9 | 21,1 | |
| 7,0 | 5,0 | 10,1 | 13,9 | 17,4 | 20,7 | |
| 7,5 | 3,0 | |||||
| 8,0 | 9,1 | 13,2 | 16,8 | 20,3 | ||
| 9,0 | 7,6 | 12,4 | 16,2 | 19,7 | ||
| 10,0 | 5,6 | 11,3 | 15,5 | 19,1 | ||
| 10,5 | 3,2 | |||||
| 12,0 | 8,4 | 13,6 | 17,7 | |||
* From the crane position “boom back”.
B) Height characteristics with 8 and 6 fold reeving of the rope, the beams of the retractable supports are retracted, the crane is installed on the supports, the work area is 250°.
| Reach, m | Boom length, m | Crane operating area, degrees * | ||
| 9,0 | 12,0 | 15,0 | ||
| Lifting height, m | ||||
| 2,0 | 9,8 | ± 125 | ||
| 2,5 | 12,8 | |||
| 3,0 | 15,8 | |||
| 3,5 | 9,1 | |||
| 3,6 | 9,0 | 12,4 | ||
| 3,8 | 12,3 | |||
| 4,0 | 8,7 | 12,2 | 15,5 | |
| 5,0 | 7,9 | 11,8 | 15,0 | |
| 6,0 | 6,7 | 10,9 | 14,5 | |
| 7,0 | 5,0 | 10,1 | 13,9 | |
| 7,5 | 3,0 | |||
| 8,0 | 9,1 | 13,2 | ||
* From the crane position “boom back”.
D) High-altitude characteristics of the crane operation with a single reeving of the rope, boom length 21.0 m with a jib 7.5 m, beams of retractable supports are fully extended, the crane is installed on supports, work area 250°.
| Reach, m | Lifting height, m | Crane operating area, degrees * | |
| Tilt angle 0° | Tilt angle 30° | ||
| 7,0 | 29,3 | ± 125 | |
| 8,0 | 29,0 | ||
| 9,0 | 28,6 | 28,1 | |
| 10,0 | 28,2 | 27,7 | |
| 12,0 | 27,3 | 26,7 | |
| 14,0 | 26,2 | 25,6 | |
| 16,0 | 24,7 | 24,2 | |
| 18,0 | 23,2 | 22,5 | |
* From the crane position “boom back”.
Work area
Click on the image to view a larger version:
The crane's operating range is 250° and 360°.
5 operating modes:
- in the working area 250° with the main boom (9-21 meters) on extended beams of retractable supports;
- in the working area 250° with the main boom (9-15 meters) on retracted beams of retractable supports;
- in the 360° working area with the main boom (9-21 meters) on extended beams of retractable supports;
- in the working area 250° with the main boom (21 meters) and a jib 7.5 meters on extended beams of retractable supports with a jib angle of 0°.
- in the working area 250° with the main boom (21 meters) and a jib 7.5 meters on extended beams of retractable supports with a jib angle of 30°.
Modifications KS-55713 Wedges with 31 m boom
Models KS-55713-1K-4V, KS-55713-3K-4V, KS-55713-4K-4V, KS-55713-5K-4V, KS-55713-6K-4V, KS-55713-12K-4V have a telescopic boom with a length of 32.5 m of “Ovoid” section and are additionally equipped with a lattice jib 9 m long with the possibility of installation at an angle of 0°, 20° and 40°. Truck cranes are equipped with two counterweights of 1 ton and 1.5 tons, carried as part of the crane, and one separately transportable counterweight of 4.5 tons, which makes it possible to bring the load-altitude characteristics on long flights closer to truck cranes with a lifting capacity of 32 tons.
