To obtain multifunctional equipment on the site, you can make an adapter for the Neva walk-behind tractor with your own hands. This option is well suited for people with technical abilities. Moreover, if you have the skills, a walk-behind tractor can be made according to preliminary drawings and plans.
You can make the adapter yourself
About the device
In terms of its design, the 4x4 adapter intended for the Neva walk-behind tractor is a fairly simple device. It consists of several main components:
- frame structure on which other components are installed;
- driver's seat;
- wheelbase, as well as wheel axle;
- mechanism for connecting the adapter and walk-behind tractor.
Simply put, the adapter is a regular cart with a seat that is attached to a walk-behind tractor. Walk-behind tractors can be such as Cayman, Patriot, Texas, Foreman, Crosser, Viking, Loplosh (loplosh video) and others. After coupling the adapter and walk-behind tractor, it can be compared in functionality to a mini tractor, but such a comparison is a little arbitrary, because the power remains the same, i.e. from the walk-behind tractor engine.
In addition, additional attachments can be attached to the adapter, which further expands the potential scope of work.
Some adapters are equipped with special compartments where you can place some kind of cargo. There are models equipped with a lifting lever, which greatly simplifies working with the device.
As a rule, the adapter contains two couplings - one allows you to attach it to a walk-behind tractor, and the second allows you to attach additional attachments. In particular, you can connect a seeder, hillers, plow, harrow and other devices to the adapter.
The wheelset axle in the adapter is of a fairly robust design, allowing the walk-behind tractor to be used on the most difficult areas of land, as well as for transporting fairly heavy loads.
It is also important to understand that driving such a unit on public roads is prohibited, which is why they are used exclusively in rural areas.
However, despite some structural similarity between all adapters, they also have some differences. In particular, rear adapters with steering, front adapters and all-wheel drive units are available for sale.
For more details about the adapter for the Neva walk-behind tractor, watch the video:
Main design characteristics
To consider the characteristics of the adapter for the walk-behind tractor, you should carefully disassemble its design:
Model range of walk-behind tractors "Neva"
- frame for mounting the main parts;
- driver's seat;
- a mechanism that provides coupling with a walk-behind tractor;
- wheel axle and wheels (two pieces).
Having studied the structure of the unit, it is clear that it is a special trolley. It is attached in a special way to the Neva walk-behind tractor and provides comfortable seating for the driver while working. After installing the adapter on the base device, it acquires the capabilities of a mini-tractor. At the same time, the range of applications of this unit can be further expanded after installing attachments.
Some adapter models have additional space for storing and moving various loads. It looks like a cart or a body. Many adapters for Neva walk-behind tractors are additionally equipped with a lifting lever, thanks to which operating the machine becomes much easier.
Most adapters are equipped with two coupling units. The first is intended for attaching it to the main driving machine, and the second is for attachments:
- digger;
- seeder;
- harrow;
- plow;
- hilling tool;
- mower and others.
The wheelbase of the unit is very strong and reliable. It can withstand enormous loads, so the adapter can be used in almost any environment.
Attachments for Neva walk-behind tractors
With steering
Such devices allow you to convert a walk-behind tractor into a mini tractor, while maintaining the power of the engine used in the unit. It is attached to the walk-behind tractor through a hitch, which is located in front of the adapter. This adapter is well suited for Forza, Sadko, Don, Huter, Profi, Plowman and Champion walk-behind tractors. The design of this adapter includes:
- frame structure;
- steering;
- pair of wheels;
- driver's seat;
- gas and brake pedal;
- clutch.
At the back of such an adapter there is a special lifting mechanism, to which you can attach additional mounted and trailed equipment. The adapter for the Neva walk-behind tractor with a steering wheel, the price of which is about 45 thousand rubles , has the following technical characteristics:
- ground clearance - about 35 cm;
- wheel track – 60 cm;
- speed indicators - about 15 km/h;
- total weight – 105 kg.
Front
Structurally, it is very similar to the previous type of adapter, but its coupling mechanism will be located at the rear. Accordingly, we get a full-fledged front adapter for the Neva walk-behind tractor. This design is completely disassembled, which greatly simplifies its further transportation.
An important area of application for a chainsaw is collecting firewood, cutting down trees and working with other wooden objects. Here you can learn how to choose a good chainsaw.
A lawn mower is a suitable device for mowing unwanted plants, grass, and weeds. Here's an article on how to wind your own fishing line on a lawnmower.
The MAZ-5551 truck remains one of the most popular eight-ton trucks in Russia. MAZ-5551 is maneuverability, reliability and practicality.
At the request of the client, additional wheels with lugs or wheels of larger diameter can be installed on the adapter. Naturally, the cost of these additions is determined separately.
- adapter length – 190 cm;
- adapter width – 81 cm;
- adapter height – 140 cm;
- wheel track – 75 cm;
- ground clearance - 30 cm;
- total weight – 65 kg;
- speed indicators are about 10 km/h.
The cost of such a unit is about 27 thousand rubles.
How to make your own all-wheel drive adapter for the Neva walk-behind tractor
Of course, purchasing a ready-made adapter for the Neva walk-behind tractor is the simplest and best way out of the situation. However, they cost quite a lot, so not every summer resident or farmer can afford to purchase them. It is not surprising that many people ask the question - how to make an adapter for the Neva walk-behind tractor?
There are quite a lot of recommendations on the network regarding the manufacture of adapters, as well as many drawings that allow you to see this device in more detail. Using them, it is quite possible to make such a unit at home, using the bare minimum of materials and tools.
What you need to make a homemade adapter
To make a homemade adapter we will need:
- pair of wheels;
- steel angles, iron sheets and pipes;
- driver's seat;
- welding machine;
- fastening connections, etc.
A do-it-yourself adapter for the Neva walk-behind tractor, drawings of which will be presented later, can be made using this minimal list. Before proceeding directly to the manufacture of the device, you need to draw its diagram.
Step-by-step assembly of the adapter
After the necessary drawings and dimensions of the parts have been thought out, the material has been found and the tool has been prepared, you can proceed directly to assembling the adapter.
- We weld a metal profile about 60 cm long perpendicularly to a section of a square metal profile about 180 cm long. It is this section that will be the mount for the wheels. Wheel stands must be at least 30 centimeters high.
- We weld the braces to the main frame and wheel hubs.
- The dimensions of the main frame will be about 40x40 cm, they can vary depending on the individual wishes of the designer. Channel No. 10 is welded to the rear edge of the frame. The side pipes are fastened with reliable bolts.
- Then the control lever is welded to the frame. To increase the control effort, the lever may have one or more elbows about 70-80 cm long. The elbows are bolted together.
- As a stand for the seat, you can use a pipe about 30–40 cm long, which is securely welded to the main frame.
- We weld the hitch to the walk-behind tractor.
We also invite you to watch the video, which demonstrates various types of adapters and their features for walk-behind tractors of several well-known brands.
Firework:
MTZ:
Agro:
Forza:
Adapter for the Neva walk-behind tractor: drawings of a homemade device
Cultivating large areas of agricultural land is labor-intensive. It presupposes the need to use small-scale mechanization tools accessible to small farmers. For example, walk-behind tractors and other equipment are used. This allows you to significantly simplify the process of cultivating land and processing it. To make it more comfortable to use such technical means, it is recommended to purchase or independently build a front adapter for a walk-behind tractor. It makes the unit easier to use.
Description
The adapter for the Neva walk-behind tractor is an additional module that allows you to use the device for riding by equipping a special place for the operator and connecting a second wheel pair to the unit. The result is a four-wheeled walk-behind tractor with a steering wheel that can be used as a mini tractor. You can make such attachments with your own hands or purchase ready-made options designed for specific models. Additionally, it becomes possible to use special attachments for hilling potatoes, a plow and other devices. Such an adapter reduces the time and labor required to perform certain agricultural work.
Front adapter
Such additional equipment options allow you to use the walk-behind tractor as a mini tractor by installing a steering mechanism, a second wheel pair, and a driver’s seat in front of the walk-behind tractor. In such a situation, the factory engine power of the unit itself is maintained. Fastening occurs due to the coupling located on the back of the adapter. At the same time, the structure can be completely disassembled, which significantly simplifies the process of transporting such agricultural machinery. On average, the parameters of the front adapter are as follows:
- Height/width/height is 1.9/0.81/1.4m.
- Ground clearance – 0.75 m.
- The distance between the wheels on one axle is 0.75 m.
- The total weight of the structure is 65 kg.
Application area
Using an adapter allows you to turn a regular walk-behind tractor into a universal and at the same time multifunctional device. You can use such a unit while sitting, which greatly facilitates the operator’s work. In addition, the accuracy of the work and the stability of the walk-behind tractor increases. It is very convenient to have a steering mechanism located in front. Complete with various attachments, it is possible to use the unit to perform the following types of work:
- Removing snow or leaves.
- Harrowing (leveling) the soil.
- Transportation of goods.
- Hilling up the earth.
KTZ adapters: what is it?
This agricultural auxiliary equipment is produced by trade and production company founded in 2022. This brand develops and produces attachments. Front adapters have become the most popular among farmers.
Externally, KTZ adapters resemble a trolley with elements attached to it:
- a hitch that secures the walk-behind tractor;
- transitional device for attachments;
- a frame to which the main components are attached;
- driver's seat;
- wheels, including the steering wheel.
Among other advantages, they are very communicative and are designed for walk-behind tractors such as Neva, Tselina, Cascade, Forza, Luch, Oka and some others. The adapter is connected to the walk-behind tractor via a rod, and thanks to the presence of front and rear linkages, the powerful adapter-walk-behind tractor combination successfully replaces a mini tractor, while costing the owner 5-6 times less.
The kit also includes a blade for clearing snowdrifts and a special tracked attachment, which allows you to use the mechanism at almost any time of the year. The completely collapsible design makes it possible to easily transport it to your destination, and the wheels, steering and the ability to work while sitting simplify operation, making it comfortable.
How to make a front adapter with your own hands
If you have minimal skills in working with simple tools, as well as the ability to use a drawing, you can easily make a homemade adapter, like a KTZ for a walk-behind tractor.
Device
The main parts of such a unit are:
- Frame.
- Operator's workplace.
- Suspension, which can be bridge, axial, portal, or rotary.
- Steering with rigid coupling.
Due to the front location of the device, there is a place for mounting the blade on it (if the rear version is used, then a portal is created on it for using attachments).
The most important element of such a design is the coupling device, which is necessary to ensure high-quality fastening of the adapter to the walk-behind tractor itself. It also provides the required level of stability for future four-wheeled vehicles. The ability to move the steering mechanism forward is provided by a rigid coupling. If the section angle of the rotating device changes, it is necessary to ensure horizontal fastening of the hinge.
Manufacturing process
The procedure for constructing a homemade adapter is as follows:
- It is created independently or a ready-made kinematic scheme adapted for a specific option is used. The most important condition here is to ensure the correct balance of the future structure.
- After this, the main frame is assembled. It is manufactured on the principle of a fork with a bushing to allow rotation.
- Wheels with a steering mechanism are connected to the front part, and a mount is also created to which the blade will be connected in the future.
- A seat is mounted on the frame, next to which a mechanism with remote control of the walk-behind tractor is installed.
- At the end, the entire structure is checked and tested to identify faults or various shortcomings.
Before use, it is recommended to paint all metal parts to protect them from rust.
Description of the unit that is not equipped with a hitch
The adapter for the Neva walk-behind tractor can be made without a hitch. When purchasing such equipment, you can expect that it will be suitable for many purposes:
- mowing grass;
- tillage;
- transportation of goods;
- snow removal.
Various attachments can be attached to the pin-like element of the Neva walk-behind tractor - a shovel, a device for removing snow and debris, a blade. You can also purchase an additional coupling device to use additional units. With its help, it will be possible to operate the device for digging and hilling potatoes without any problems.
Basic elements of the adapter
Most steering adapters come with a rear tow bar. This unit is usually used to attach a cart or a foot brake. The unit itself has adjustable pneumatic tires. The presence of a seat spring ensures comfortable movement of the driver on uneven surfaces.
This is interesting: Which walk-behind tractor is better to choose: Oka or Neva
Adapters for the Neva walk-behind tractor: characteristics and application features
Caring for farmland requires incredible physical effort, and therefore it is impossible to do without auxiliary equipment. Using walk-behind tractors, you can significantly simplify absolutely all agricultural work, since the versatility of walk-behind tractors is truly impressive. In addition to plowing, hilling, lawn maintenance, cargo transportation and winter work, the above-mentioned unit is capable of acting as a vehicle. This becomes possible exclusively due to a specialized adapter for motorcycles.
Peculiarities
The walk-behind tractor can be practiced individually, and you can also attach various auxiliary tools to it, such as a harrow, cultivator, and mower. Such devices make it possible to seriously increase the possible range of tasks that a walk-behind tractor can handle. But besides this, it is possible to use a motorcycle as a vehicle if you create a specialized adapter for it in advance.
This device allows you to sit quite comfortably on the seat with which the adapter is equipped and do exactly the same work, only with a much greater level of comfort.
In essence, the adapter structure is relatively primitive. It looks like a trolley on which various elements are attached:
- a hitch for fixing a walk-behind tractor and an adapter for attachments;
- driver's seat;
- wheels;
- frame for fastening primary components;
- steering wheel.
If you reconstruct the walk-behind tractor into a mini-tractor, you can further expand its functionality. Of course, identification with a mini-tractor is to some extent symbolic, since the power of the unit will remain the same, as will the resources of the unit used, or rather, its motor. You can build an awning from the scorching sun. With such equipment, you will not be afraid of tedious agricultural work under the hot sun. You can improve the vehicle's maneuverability in rainy or snowy weather by installing a tracked attachment.
The lion's share of adapters have a system that involves attaching a trailer in which cargo can be transported. Additionally, it can be equipped with a lifting handle. There are 2 couplings: the Neva unit itself is fixed to one, and any attachments are attached to the second. In addition, the design has a steering wheel, which optimizes its maneuverability.
The center mount of the unit is made of durable materials, since it must withstand considerable overloads, because you will also be driving the unit and additionally transporting quite large loads. The unit can be used in almost all conditions, including the most difficult ones.
In specialized stores you can buy an auxiliary unit with a steering wheel for the Neva walk-behind tractor, or you can make it yourself. Moreover, there are plenty of drawings on the World Wide Web, which greatly simplifies the assembly procedure.
Instructions for making the adapter
Now we’ll tell you how to make a front adapter with steering for your small tractor yourself.
https://youtube.com/watch?v=vqr-DWeO6cs
To produce an adapter for a walk-behind walk-behind tractor, you will need the following materials:
- Two identical wheels on an axle. The radius of the wheels ranges from 15 to 18 inches. Even wheels from an old Soviet Volga might work.
- Bearings for steering wheels and columns.
- Steel for the frame (channel, pipe or angle).
- Fastening elements (washers, bolts, nuts).
- Lubricants (litol or grease).
- Consumables (drills, electrodes, discs for grinders).
- Set of wrenches.
- Bulgarian.
- Welding machine.
- Drill.
Before starting work, it is important to consider that the wheels should not have a very large or small radius
Algorithm of actions
We begin to manufacture attachments for the walk-behind tractor.
Drawing of the adapter circuit for the walk-behind tractor
To make a steering adapter for a walk-behind tractor, you will need a frame with a bushing and a fork. This will ensure free rotation of the walk-behind tractor using the steering wheel.
- Everything will start with making the frame. It can be done from cut pieces of selected steel of the required length. The metal can be separated with a grinder and the elements can be fastened with electric welding or bolts.
- Next we build the chassis. If the motor of your walk-behind tractor is located in front, therefore, the track size must be determined by the main wheels. The rear ones are mounted to the frame using an axle. It can be created from a piece of pipe of suitable width. At the ends of this pipe we press bearings with bushings. The wheels will be installed on them. If the walk-behind tractor engine is located at the rear, then the track width must be larger, otherwise the minitractor will not be able to move normally during operation. In such a situation, it would be best to remove the base wheels of the walk-behind tractor and reinstall it, but on a more spacious axle.
- To make a steering wheel for the unit, you do not need to additionally remove the handles from the car or motorcycle. Stop using the handle. In other words, the operator will have the opportunity to control the minitractor with a steering wheel that looks like a motorcycle. However, with it the operator will not be able to reverse normally. That is why it would be preferable to mount the steering column on a mini tractor.
- When using an all-metal frame, the steering will be integrated with the front axle of the walk-behind tractor. You can make an articulated support, then the control column will rotate the entire front half-frame. To do this, the technician will need to attach a gear to the front half frame. The second gear is installed on the steering column.
- The seat, which can be previously removed from a passenger car, must be welded to the frame of the slide. The technician needs to make sure that it is adjusted, especially when controlling the front adapter attached to the walk-behind tractor.
- If you intend to use the minitractor to work with plows and cultivators, then you will need additional welding of the bracket. An auxiliary hydraulic system must be installed to operate the attachment. The pump for it can be easily removed from agricultural machinery. If you have to work with semi-trailers, then you need to take care of additional welding of the towbar to the rear of the frame. It can also be successfully borrowed from a passenger car.
- You can do the fastening (coupling) yourself. To do this, you will need drawings, which are easily found in articles based on the top results of the desired topic. And we will talk about how exactly to carry out the coupling.
It is important to keep track of those
This completes the installation of the front adapter on the Neva walk-behind tractor. After completing the assembly, all that remains is to lubricate the minitractor and check it for functionality. After this, the adapter assembly can be assessed as complete. Now you can safely carry out the required work on land using new equipment.
Classification
It should be noted that there are a total of 3 types of adapters: standard, with steering and front. Let's look at the features of each type of structure.
Standard
These modifications include the basic frame structure on which the required components are based, the driver's seat, the wheelbase, the axles, the coupling device (coupling) of the unit with the adapter. Roughly speaking, the designated structure can without hesitation be called an ordinary cart with a comfortable seat adjacent to the walk-behind tractor.
In addition, the possibility of additional aggregation with all kinds of mounted equipment cannot be ruled out, which will increase the practicality of the mechanism. Nowadays, you can purchase an adapter or create it yourself with special sections for placing compact additional items.
Units with steering wheel
Today they are extremely popular due to their convenience and relatively reasonable price. The motor is mounted to the tractor through a hitch located in the front area of the adapter. At the rear of this addition with steering control there is a separate lifting device, to which it will be easy to attach a variety of attachments.
Front adapter for motorcycles
This device is very similar to the option described above, but its coupling device is located at the rear. The structure is so simple that it can be disassembled and subsequently transported without much effort. Often specialized wheels are mounted on the front adapter to increase productivity.
Models
Several types of adapters are in particular demand.
- Sample “AM-2” for performing all kinds of agricultural work in summer cottages. The presence of a specialized frame and a device for hanging tools makes it possible to implement comfortable and easy use. A convenient rotating mechanism allows you to freely carry motorcycles around the site. The dimensions of the adapter are 160x75x127 centimeters with a weight of 55 kilograms and an operating speed of no more than 3 km/h.
- The APM-350-1 sample can be used as a seat for traveling short distances or for auxiliary attachments: a plow, 2 hillers, a potato planter and a potato digger. The connection is made by a frame with 2 SU-4 locks. The series is equipped with a pedal for attachments and a position change lever. The adapter parameters are 160×70 centimeters with an operating speed of 2-5 km/h.
- The front adapter “KTZ-03” is distinguished by a coupling device placed behind it. The rear fixation option is quite comfortable. This device is completely collapsible, which makes it possible to greatly facilitate subsequent transportation.
How to make an adapter for the Neva walk-behind tractor?
Step by step guide
The usual equipment is presented as a steel frame. Before starting to create it, prepare a drawing of a device for a walk-behind tractor. The device is made from a profile pipe measuring 1.7 meters. A pipe (50 centimeters in size) is welded to one piece of material at a right angle. The last component is a clamp for the racks for the wheels of the attachment. The height of the racks is 30 centimeters. For a makeshift adapter for motor vehicles, wheels from a construction and garden cart are used. They are installed on bushings with a bearing unit.
Struts are welded to the base pipe and bushings, the length of which is directly dependent on the degree of their slope relative to the structure. The dimensions of the adapter frame are 0.4×0.4 meters. To adapt the equipment to the frame, a channel is welded (0.4 meters in size). The side pipes are connected with bolts. A handle with 3 bends (sizes 20, 30 and 50 centimeters) is welded to the frame. To multiply the applied efforts, the product is equipped with the same handle (75 centimeters long).
The hitch can be found in the store. If this mechanism is performed independently, then close attention is paid to strength. The seat is mounted on a metal base welded to the main pipe. The completed equipment is ready for use.
Unit manufacturing technology
Before carrying out any work, it is necessary to create a detailed drawing, which will facilitate the execution of all work. The prepared pipe should be cut into separate pieces measuring 1.7 and 0.5 m. The end of the short section must be welded to the long one at an angle of 90 degrees. As a result, a base is formed for securing the wheel stands.
Adapter circuit
A channel is welded to the rear end of the frame. The side pipes are connected using fasteners in the form of bolts. A lever is also installed on the frame. If it is necessary to increase the adjustment force, it is recommended to mount another similar element 75 cm long.
Homemade adapter for walk-behind tractor
Additional recommendations
Very often coupling units can be found in the store. If these elements are not available for sale, you can try to make them yourself. During operation, you must adhere to all requirements to ensure reliable operation of the unit in any conditions. The seat is fixed to a support made of metal profiles, which is welded to the main pipe.
Related video: Motoblock Neva MB 2B 6.5L with RS
Universal device
To create a universal adapter, you will need:
- corners;
- pipes;
- sheet iron;
- 2 wheels;
- seat;
- welding unit.
The described mechanism is practiced for the implementation of basic agricultural work and cargo transportation. The manufactured device can be equipped with a lifter, harrow, or plow. The universal adapter includes the frame, hitch, wheels and seat.
To achieve structural stability and prevent overloads, a graphical display of the working units and blocks of the device mechanism is initially developed. When creating the design, the fork and bushing require special attention. This device ensures unhindered rotation of the trolley. The frame is welded from corners and iron pipes. The body can be constructed from iron sheet. Along with this, the height of the sides should be higher than 30 centimeters.
Preparatory stage of adapter manufacturing
The adapter has a simple design, but its manufacturing procedure cannot be called simple
Initially, you need to take into account the drawings and dimensions that will help create a device without defects
You need to acquire the following materials and tools:
- Electric drill;
- Welding;
- Electric hacksaw;
- File;
- Square;
- Sheet of steel with a thickness of 5 millimeters;
- Several square pipes with a diameter of one inch;
- A set of fastenings.
Key structural elements are manufactured as follows:
- Hitch. Installed on the frame and secured with bolts. The coupling is two welded pieces of square pipes and a piece of water pipe. The latter is inserted into the rod with a welded tee;
- Wheel fixation unit. Two pieces of pipe 10 centimeters long are welded at right angles. The horizontal section is inserted into the mounting pipe and securely fixed with a bolt. An axle and bearings with wheels are attached to a vertical blank.
When all the tools are prepared and the main parts are made, you can assemble the adapter.
Recommendations
Before you start making an adapter for motorcycle equipment yourself, it is advisable to:
- learn the principle of operation;
- decide on the type of device.
Adapters differ in their control method:
- the coupling device and attachments are controlled using handles;
- steering gear.
In the second case, the equipment is adjusted using a knob. The steering wheel is used to carry out any task.
For long-term work, an industrial adapter can be improved.
It is advisable to make the seats soft (to reduce the load on the spinal column).
When creating a device yourself, pay close attention to:
- thickness of iron;
- welds;
- wheel dimensions and the possibility of changing them quickly.
Professionals recommend equipping the makeshift adapter with tires and large-radius tubes. The selection of adapter is carried out depending on the walk-behind tractor model. Multi-purpose attachments are suitable for any mini-equipment. Other mechanisms are carried out taking into account the function of regulating the distance to the steering wheel and the distance between the wheels of each axle.
To learn how to make an adapter for the Neva walk-behind tractor with your own hands, see the following video.
How to make an adapter for the Neva walk-behind tractor with your own hands
To save money and get multifunctional equipment in your garden, it’s worth learning how to make an adapter for the Neva walk-behind tractor. This option is suitable for those who do not have technical abilities. But if you have certain skills, the all-wheel drive adapter for the Neva walk-behind tractor is assembled independently according to drawings drawn up in advance.
Is it possible to assemble an adapter for the Neva walk-behind tractor?
For the Neva walk-behind tractor, an adapter operating in a 4x4 pattern is sold in an agricultural equipment store.
It is recommended to prepare all the necessary materials and tools. A homemade adapter for the Neva walk-behind tractor helps you save money and spend it on other parts needed to upgrade the device.
It’s worth considering what the front adapter to the Neva walk-behind tractor looks like.
An adapter for a Neva motor-cultivator means a trailer with a seat made on the basis of a two-wheeled frame. The functional purpose of such equipment is to make working with a walk-behind tractor simple, convenient and comfortable. The adapter allows you to upgrade the cultivator into a small tractor, which is suitable for various types of work in the country, on a farm, or in a personal plot.
Neva walk-behind tractors with a homemade adapter come in 2 types:
- Heavy, which are divided into short and long. They are suitable for different types of motor cultivators, making work on the ground easy.
- Lightweight, which are installed on cutters. This means that the mechanism will be attached to one of the 4 wheels of the walk-behind tractor.
The diagram of the KTZ 03 front adapter for the Neva walk-behind tractor shows the presence of the following structural elements on the mechanism:
- Hitches, one of which is needed to connect the adapter and the walk-behind tractor, and the second is for hanging one or another auxiliary equipment.
- Seat.
- Drawbar of short or extended type.
Harrows, plows, diggers, and mowers can be used as attachments. To secure them, it is enough to provide one hitch. The devices used can be moved to the working position using a manual drive. Device drawings are required.
Previously, the stages of manufacturing a mechanism operating on all-wheel drive and steering were described. To make such a device yourself, you will need the following materials:
- rectangular steel frame;
- 2 wheels;
- an old seat from a tractor or combine;
- corners;
- steel sheet;
- metal pipes.
You need to prepare a welding machine and a lathe, a set of tools, and tools for gardening work.
Before assembling the structure, it is necessary to make a kinematic diagram. The principle of its operation is as follows:
- The powertrain motor, which is necessary to drive the front wheels, must transmit torque through a chain.
- Then this force goes to the reverse gearbox.
- The cardan transmission allows torque to be transmitted to the rear axle, which drives the rear wheels, which are the drive wheels.
Types of adapters for motorcycles
Adapters for walk-behind tractors are divided depending on the method of their attachment.
The following types of devices are distinguished:
Rear adapter for walk-behind tractor. The hitch is located at the front of the device, so after connection the adapter will be located at the rear of the unit;
Depending on the area of use, the following adapters are available:
- Shortened. Small in size, which can be used with a light walk-behind tractor. The low weight allows the adapter to be attached directly to the wheel of the unit;
- Elongated. Copes with heavy-duty agricultural machinery. They are distinguished by their significant dimensions and relatively large mass.
Depending on the presence of the body, the following designs are distinguished:
- Bodywork. The existing body allows you to transport various cargo over long distances. They are actively used for everyday tasks and harvesting;
- Bodyless. They are used only for connecting to a walk-behind tractor.
When choosing an adapter, you need to pay attention to the design features of the device. It must fully meet the needs of the owner
How to make an adapter for the Neva walk-behind tractor with your own hands
In order to make an all-wheel drive front adapter for the Neva MB walk-behind tractor with a steering wheel, you need a base. It can be a rectangular pipe, the length of which is 1.7 m. Next, a 50-centimeter pipe is welded to it as a transverse crossbar. Then you need to weld on it special stands for the wheels of the adapter for the Neva walk-behind tractor type MB-2 or another model of motor-cultivator.
The height from the wheel axis to the top of the stand should be 30 cm. For the adapter to the Neva walk-behind tractor model MB or KTZ, wheels from a garden cart are perfect. It is necessary to bore the inner bushings on the machine in order to put the outer bearings on them.
Next, the following steps are performed:
- Braces are welded to the bushings and the central pipe, the length of which can be very different and depends on the angle that must be maintained for the adapter.
- It is necessary to calculate and weld frames for attaching attachments.
- The side tubes of the frame are attached to the wheel stands with large-diameter bolts. This will help both the racks and the wheels of the front adapter KTZ-03 or MB-2, welded to the Neva walk-behind tractor, withstand heavy loads.
- It is necessary to weld a transverse channel No. 10 to the rear end of the frame. It is important that this part and the side pipes are the same length, not exceeding 40 cm. As a result, the frame will be square in shape.
- A lever with 3 elbows is welded to the frame. Another lever (75 cm in length) is mounted on the side, which will increase the functionality of the adapter.
- A leg pipe is mounted to the central pipe to attach a seat for the operator. The made soft seat should be placed at a distance of 80 to 85 cm from the front end of the frame.
- Make a complete body and weld it to the walk-behind tractor. The sides of the body can have different heights, but not less than 30 cm, in order to transport cargo.
- Check the working condition of the mechanism and the adapter between the attachment and the walk-behind tractor.
If the equipment works normally, then the cultivator can be painted. This is how you assemble the adapter for the Neva walk-behind tractor with your own hands.
Types of KTZ adapters
There are several types of KTZ adapter, differing from each other in their configuration, technical characteristics and cost.
- The main model is the KTZ-02 adapter, which is characterized by:
- overall dimensions (mm) 1300x800x1100;
- load capacity (kg) 120:
- weighing (kg) 84.
- The KTZ-02/2 model, equipped with a rear linkage, has the same overall dimensions and load capacity, but weighs slightly heavier - 100 kg.
- The KTZ-02/3 model, which comes with a front linkage, and the KTZ-02/4 variety, equipped with two linkages, have the same characteristics as the previous one.
The latest modification, due to its versatility, is slightly more expensive than the others.
What problems does it solve?
In short, the KTZ-02 adapter is used for:
- Transport work. Their intensity can be increased thanks to the self-unloading body, coupled with the ability to attach a cart;
- Soil cultivation, including plowing, harrowing, hilling, and so on;
- Snow removal.
In this case, the owner of the adapter gets the opportunity to:
- Hook up a potato digger with the rear suspension and collect potatoes;
- Bring sand, gravel, organic fertilizers or sawdust;
- Having picked up the plow, plow the country plot;
- Clear the road to the house - the adapter is able to cope with snowdrifts up to 100 mm.
Thanks to the small dimensions of the KTZ, even entering a narrow greenhouse is not a problem for the walk-behind tractor.
Main advantages
The main advantage of the KTZ adapter is its reliability. It is produced in strict accordance with accepted standards, has a quality certificate, and is reliably protected from adverse environmental conditions thanks to its anti-corrosion powder coating. The durability margin is also ensured by the high quality of components and materials used. Warranty period – 1 year.
On the other hand, KTZ adapters are distinguished by their high functionality. After this, it is not surprising that Russian wheel adapters are practically in no way inferior to their Japanese counterparts, occupying leading positions in the domestic market.
What are Neva walk-behind tractors with a homemade adapter used for?
The Neva walk-behind tractor with a homemade adapter is convenient to operate on plowed or virgin land. To increase the functionality of the cultivator, it is recommended to attach a blade capable of removing snow to the unit. It is enough to place the coupling unit in front, checking the quality of the coupling. It should be very high so that the walk-behind tractor does not break at the right moment.
A homemade mini-tractor will allow you to perform a wide range of agricultural work, use motor cultivators in the garden: plowing, cultivating the plot, hilling vegetables, collecting snow, taking out garbage.
The simplest adapter option for a walk-behind tractor is all-wheel drive.
A more complex design involves installing a steering system, which will allow the use of a home-made structure on difficult soils, ensuring the stability of the unit and trailer. When steering, you must carefully check the clutch of the adapter and the cultivator, otherwise the mechanism, assembled independently, will throw from side to side. The steering wheel can be taken from old cars or from a tractor. All seams after welding must be cleaned and checked for strength.
