Truck crane KS-5579 Motovilikha: technical characteristics, photos, lifting capacity, weight, boom length

Technical characteristics of crane equipment

The telescopic boom of the KS-5579 truck crane consists of three sections - they are made of high-strength steel with welded internal and external fillet welds. In the fully extended position, the crane boom length is 23.3 m. When using a jib, the boom length increases to 36.3 m.

The KS-5579 truck crane has a large work area due to the fact that the crane equipment rotates 360 degrees. The area of ​​the serviced sub-boom space is 1950 m2. With the maximum configuration, the lifting height of the hook is 37 m.

The ability to extend the boom with a load on the hook allows the KS-5579 truck crane to deliver it to places where access is limited due to the small overall dimensions between the mounted structures.

The boom in the transport position is placed on the stand, the hook clip of the main lift is placed without the help of a slinger into a niche on the stand behind the cab of the KS-5579 truck crane, without interfering with the driver’s view.

A two-stage lattice jib (not included in the list of basic equipment and is available optionally) can be installed to the boom at an angle of 0, 15 and 30 degrees. In the transport position, the jib is rotated and secured to the side of the boom. The jib unfolds into its working position without the help of additional lifting mechanisms.

The KS-5579 truck crane is equipped with hydraulic supports with retractable support beams, allowing the crane to operate with a full and incomplete support contour.

What is the difference between reach and length?

The difference is in the measurements. The length of the boom is the distance between the axes of the attachment of the boom and the head block. The reach is considered to be a conditionally drawn vertical from the axis of the crane attachment to the center of the load lifted on the hook. This value is calculated in the horizontal plane, and is always less than the length.

Here it is necessary to clarify that the length is considered a reference value, and the offset is changeable. For example, when the structure is lifted, the maximum reach is reduced, and the shorter the distance from the load to the support points, the more stable the equipment, and therefore, the higher the load capacity.

The law of leverage applies here, determining not only the nominal weight on the hook, but also the height and angle of lifting the load. Let's consider the principle of operation of this scheme using the example of three positions:

1. Maximum – let’s say that with a maximum reach of 10.7 m, the crane can lift a load weighing 350 kg.
2. Medium - if this value is 5.9 m, 1.5 tons can already hang on the hook.
3. The minimum is about 3.5 m, but you can lift 2.5 tons.

In this case, the nominal value of such an arrow can only be achieved at an angle of 11 degrees, which ensures a lifting height of the order of magnitude. 5-6 meters. By changing the reach to a medium level, the truck crane will be able to lift a more massive load to a height of about 11 meters, at an angle of 51 degrees. If you retract the boom completely and then lift it vertically, you can move the load to the maximum possible height: as far as the length will allow.

Truck crane KS-5579.1

The KS-5579.1 truck crane is a 25 t crane mounted on a KamAZ-53228 truck chassis. Special-design KS-5579.1 truck cranes can work in hazardous conditions, with toxic and explosive loads.

The wheel formula of the base car is 6x6. The car chassis can be equipped with one of two variants of turbocharged diesel engines - a 240 hp power plant. and 260 hp The engine is paired with a 5-speed manual transmission. In such a tandem, the engine can accelerate the crane without a load to a speed of 80 km/h.

The safe operation of the KS-5579.1 truck crane is ensured by a complex of instruments and devices, incl. microprocessor crane load limiter ONK-140 with digital display of information in the crane operator’s cabin about the weight of the load being lifted, the length and angle of the boom, the percentage of crane load by load moment.

Telescopic boom of truck crane KS-45721, KS-55732 (boom 21.7 m) - KS-45721D.63.00.000

The telescopic boom of the KS truck crane is a complex technical device that allows you to quickly get to work, based on current conditions. The telescopic boom KS-45721, 55732 has three sections (first, second, third), the total length reaches a maximum of 21.7 meters. We will help you buy a new telescopic boom of a truck crane from a warehouse in Chelyabinsk for a truck crane KS-45721, KS-55732 at a factory price - we are an exclusive operator for the sale of spare parts and components for truck cranes and special equipment produced by the Chelyabinsk Mechanical Plant. Description of the telescopic boom of the truck crane:

The boom is the main working element of the crane in the form of metal structures inserted into each other.

The telescopic boom of the truck crane consists of:

• section of the first (fixed), or movement only along the axis
• second retractable section (middle)
• section of the third retractable (upper)

The principle of operation of the telescopic boom of a truck crane:
The extension of the sections of the second and third boom occurs by extending the hydraulic cylinder and the pulley block; The sections are retracted using a hydraulic cylinder and a retraction pulley block, thereby increasing the height to which the crane can lift the load. The boom is lifted using a hydraulic cylinder mounted on the axles. A guide roller for the cargo rope is mounted at the base of the section. Due to the hydraulic cylinder and accelerating pulley, the middle section moves relative to the stationary section, and, accordingly, the upper section relative to the middle one (together with the movement of the middle section).

When telescoping and moving boom sections, their movement is carried out along sliding plates installed on the boom sections. And the side sliders are designed to limit the lateral movements of the boom sections.

The telescopic boom of the KS-45721, KS-55732 truck crane includes 3 sections:

• section one (root);
• section two (middle);
• section three (upper).

The modern design and structure of the telescopic boom allows us to guarantee high reliability and long service life.
You can buy a telescopic boom assembly for truck cranes KS-45721, KS-55732

in our online store at a competitive price, using the convenient service:

Call the toll-free hotline 8-800-555-74-74 from all over Russia to get the necessary information.

If you need advice, order a call on the website, leaving your phone number, and our manager will call you within a few minutes and help you.

We will quickly ship the assembled telescopic boom of the KS-45721, KS-55732 truck crane to any region of the country.

Truck crane KS-5579.2

This modification of the truck crane has minimal differences from the basic version KS-5579.1. The KS-5579.2 truck crane has crane equipment, also designed for a weight of up to 25 tons, and is installed on a KamAZ-53229 truck chassis with a 6x4 wheel arrangement.

The base car can be equipped with two versions of turbocharged diesel engines with a capacity of 240 and 260 hp. The maximum torque will be 85 and 95 kgf*m, respectively.

The length of the vehicle base of the KS-5579.2 truck crane varies between 8.18-9.3 m. The width of the chassis is 2.5 m, which allows it to easily use public roads and get to the work site under its own power.

Truck crane KS-5579.3

The KS-5579.3 truck crane is mounted on a Ural-4320 base chassis with a 6x6 wheel arrangement. Compared with previous modifications, the KS-5579.3 is distinguished by increased cross-country ability and perfectly overcomes completely off-road areas. Thanks to its standardized overall dimensions, it can also be driven on public roads at speeds of up to 80 km/h (unladen). Chassis length – 8.98 m.

The KS-5579.3 truck crane is equipped with a diesel turbocharged engine with a V-shaped arrangement of six cylinders. The power of the vehicle base is 230 hp.

We previously wrote about how mounting baskets are installed on a truck crane.

Providing truck crane services: when is it profitable to rent equipment, how to conclude an agreement

What types of burners are there: by fuel type, gas, by application, for boilers

Screw screw conveyors for bulk materials: device, characteristics, types of spiral conveyors

Metal cable trays: advantages, types, which ones to choose

Truck tire rating: for drive and steering axles, for semi-trailer with characteristics in the table

Renting a front loader with or without a driver: which is more profitable?

Which trailer is better - single-axle or two-axle: which one is more convenient, which one is better to choose for a car or truck

Caterpillars for special equipment: what advantages do they have over wheeled vehicles?

How to choose tires for special equipment: choose the right one

Diagnostics of Common Rail diesel injectors: types, faults, repairs

Productivity of jaw crushers: what it depends on, calculation formula

Truck crane 25 tons: market offers, characteristics, prices

Although only 5 manufacturers of truck cranes survived from the industrial legacy of the Soviet era until 2022, only a quartet successfully “confuses the cards” for foreigners.

In the Russian construction field, local bosses have settled in the person of “Galichanin”, “Ivanovets”, “Klintsy” and “Chelyabinets”, and some of the foreign brands from the Middle Kingdom - XCMG.

Let’s figure out which models are available in this category of lifting equipment and which brands have firmly taken root in the market.

Supply creates demand for truck cranes

Over the past three years (from 2016 to 2022), the production of lifting equipment has gotten rid of the “shaking in the knees” and already in 2019 crossed the growth line of 1.3%. Sales volume amounted to 2,980 units.

Among the strikers was the Central Federal District with a share of 67.1% in the total number of truck cranes produced by Russians. Over the past years, the average cost of this type of equipment has crept up to 6,593,423.7 rubles, which, by the way, is an increase of 25.8%.

It is the 25-tonne trucks that account for a large segment of the market. And each manufacturer has its own arsenal of lifting equipment, which designers continue to improve and update.

As a rule, the equipment is designed on the basis of chassis of Russian brands and is equipped with YaMZ, KAMAZ and Cummins power plants.

Let's get acquainted with the range of truck cranes offered by manufacturing companies and the range of approximate prices for equipment depending on the modification and configuration.

Truck crane "Galichanin"

This brand welcomed 2020 with a line of 13 truck cranes with a lifting capacity of 25 tons based on KAMAZ and URAL chassis with different wheel formulas, boom configurations and technical parameters.

Despite the fact that the configuration of the produced cars varies from model to model, they are all united by belonging to the Euro-5 environmental class.

As for prices, the price list is based on data from the official portal of the manufacturing company, and may change as early as April 2022.

Truck crane KS-55713-1V-4

Price: 9,450,000 rubles Weight in min. configuration: 21.65 t Transport speed : 60 km/h

The most expensive among its brothers was the “Galichanin” KS-55713-1B-4. The truck crane is designed on the KAMAZ basis with a 6x4 wheel arrangement and an ovoid profile boom 31.8 m long.

This model, in its basic version, has a KAMAZ 740.705-300 Euro-5 power unit with a power of 300 hp. s., but an optional replacement with a Cummins ISB6.7E5300 Euro-5 with a power of 292 hp is provided. With.

According to the stated characteristics, in this modification the truck crane has a maximum boom height of 31 m with a load holding capacity of 6.7 tons. At a reach of 29 m, the load capacity is 430 kg, and at 8 m - 8 tons.

At the same time, the nominal speed of lifting and lowering the load is 6.2 m/min, and the maximum reaches 24.8 m/min. The crane operates in a 360-degree zone with a maximum load moment of 85 t m and is capable of moving dangerous goods when additionally equipped with a special package.

The model is equipped with an ONK-160 load monitoring device and a set of counterweights with parameters 0+1.4+1.0 / 4.5 - optional.

Let us remind you that, optionally, the lifting height of the hooks on the 25-ton “Galichanin” trucks can be increased to 39.3 m.

Truck crane KS-55713-3

Price: 7,950,000 rubles Weight in min. configuration: 21.2 t Transport speed : 60 km/h

The budget option in the 25-ton family was the KS-55713-3 on the Ural-4320 chassis with a 6x6 wheel arrangement. It is equipped with a rectangular profile boom up to 21.7 m long. This model uses a YaMZ-536 Euro-5 engine with a power of 273 hp. With.

The machine also operates in a 360-degree zone with a maximum load moment of 80 tm. And the platform rotation speed is 2.5 rpm.

The crane has a maximum reach of the main boom of 18 m. The hook will hold 840 kg in this position. At a minimum reach of 8 m, the boom will support 5.84 tons. With a lift of 21.7 m, the load capacity is 6.34 tons.

The equipment has a maximum speed of lifting and lowering loads from 6 to 40 m/min. The OGM-240 device is responsible for safety here. For customers, the manufacturer offers to optionally equip the truck crane with a northern package and functionality for working with dangerous goods.

Let us remember that two years ago, changes were made to the design of this model for the first time in 20 years, improving performance and cargo-height characteristics.

Truck crane "Ivanovets"

In the 25-tonne segment, this brand is also represented by 13 versions of truck cranes on the URAL, MAZ and KAMAZ chassis with different configurations, power units and variations in boom lengths.

The entire family of these machines is equipped with an ovoid profile boom and engines of environmental class 5. The cost varies depending on the configuration and the base chassis used.

In our case, we show the starting price range at which dealers offer this equipment on well-known online trading platforms.

Truck crane KS-45717A-1R

Price: from 8,757,750 rubles Weight in min. configuration: 23.32 (with jib) t Transport speed : 60 km/h

In terms of price, the KS-45717A-1R occupies a leading position in the line. It is integrated with the MAZ-6312C3 (6x4) chassis with a YaMZ-53623 engine with a power of 273 hp. With. The load moment of the machine is 85 t m, and the working area is designed for 360 degrees.

The folded length of the 4-section boom is 9.9 m with a maximum telescoping of up to 30.7 m. At a height of 30.7 m, the boom can support 6.34 tons, and at a maximum reach of 23.8 m - 740 kg.

At an outreach of 8.2 m, the load capacity is declared at 6.48 tons. The truck crane is capable of moving cargo (lifting and lowering) at a speed of 0.2 to 7.4 m/min.

Like its opponents, the KS-45717A-1R is equipped with a microprocessor-based load limiter, although the manufacturer does not indicate the brand in the description of the model. As options, the manufacturer offers: a jib, a sleeping bunk in the cabin, a construction basket and other “goodies”.

For those who want to get a more powerful truck crane, we recommend paying attention to the KS-55717K-1 model. It was presented at the last bauma-CTT.

Truck crane KC-45717-1

Price: from 6,480,000 rubles Weight in min. configuration: 20.45 t Transport speed : 60 km/h

Among its fellow tribesmen, the KC-45717-1 model can be considered relatively budget-friendly. For a more modest amount, the manufacturer offers a truck crane based on the URAL-4320 (6x6) chassis. Under the hood of this model lies 273 hp. With. thanks to the YaMZ-53623-10 brand motor.

The truck crane has a 3-section boom with the ability to lift 8 tons of cargo by 20 meters and telescoping up to 19 meters (cargo weight -1.28 tons). At the same time, the lifting and lowering speed of this crane is 0.2 – 6.8 m/min.

The working area is limited to 360 degrees, and the load moment is 80 t m. The developer equips the crane with a device for limiting the load capacity and fixing operating parameters, and also optionally offers additions in the form of a jib, a construction basket, and a mechanism for tilting the crane operator’s cabin.

If you are interested in how and what Ivanovets truck cranes are made of, then we invite you to read this material.

Truck crane "Klintsy"

The range of 25-ton serial truck cranes of this brand consists of 17 models, in which boom lengths vary from 21 to 33 meters. The lion's share of the equipment is built on the KAMAZ chassis, but an option for integration with the Korean CAMC brand dump truck chassis is planned.

However, due to the epidemiological situation throughout the world, the appearance of a line of truck cranes with a 24-meter boom and based on an imported chassis has been shelved for now. By the way, experimental samples already exist, but there is no talk of a serial launch yet.

Truck crane KS-55713-4K-4V

Price: from 9,750,000 rubles Weight in min. configuration: 21.92t Transport speed : 60 km/h

The leader in cost in the model range of the Klints family is occupied by the KS-55713-4K-4V, which received a design modernization last year. In the basic version, the crane is integrated with the KAMAZ 65111 (6x6) chassis with the KamAZ-740.662-300 8-cylinder four-stroke diesel power unit. The truck crane operates in a 360-degree zone with a load moment of 85 t m.

The model is equipped with an “ovoid” profile boom, which reaches a height of 31 m when telescoping with the ability to hold 6 tons of cargo. At a maximum reach of 30 m, the load capacity is 700 kg, and at a minimum reach of 8 m, the hook will hold 8 tons.

In lifting and lowering mode, the truck crane moves a load weighing no more than 6 tons at a nominal speed of 6 to 12 m/min, depending on the multiplicity of the pulley.

The manufacturer equips the model with counterweights + 1+1.5 tons as part of the equipment, as well as a separate counterweight weighing 4.5 tons. According to the manufacturer, this truck crane can work with dangerous goods, but information about the presence of a load monitoring device is on the official portal , unfortunately no.

You can read more about the test drive of this model here.

Truck crane KS-55713-3K-1

Price: from 8,050,000 rubles Weight in min. configuration: 20.15 t Transport speed : 60 km/h

The KS-55713-3K-1, based on the Ural-4320 all-terrain chassis, turned out to be a more budget-friendly version of the family. In this version, the truck crane received a YaMZ-53622-10 power unit with a capacity of 240 hp. With.

As for the equipment, the crane is equipped with a boom 21 meters long. When lifting to this height, the hook will hold 6.4 tons. The maximum reach is stated at 19.4 m with a load capacity of 900 kg, and the minimum is 7.5 m with a load capacity of 6.6 tons.

The boom telescoping process is limited to 15 m/min and allows in normal mode to move loads weighing no more than 6 tons, but in accelerated mode - weighing no more than 4.5 tons. In this case, the crane lowers and raises the load at a speed of 5.2 m/min.

Although the manufacturer can optionally equip the machine with a 7.5 m jib, the crane is designed to work in a 360-degree area.

Like its opponents, the crane’s package includes a parting for fixing characteristics and overload protection, but again without mentioning the model.

By the way, several 25-ton trucks from the Klintsovsky plant began to be produced in the light version.

Truck crane "Chelyabinets"

The Chelyabinsk truck crane can boast a decent arsenal of 25-ton trucks, with a full complement of 16 models.

Of these, four operate on gas equipment, are integrated under the URAL-4320-16 or KAMAZ-43118-37 chassis and are equipped with a boom length of either 22 m or 28.1 m.

The manufacturer does not indicate the cost of this four, like other models, on the official portal, and dealers also have a nameplate labeled “price on request.” Therefore, the price list for hotel models presented below is based on data from online trading platforms.

As for the Plus series truck cranes, according to the manufacturer, they have specifications that are different from their previous versions.

Truck cranes KS-55732-33 and KS-55732-28

Both models, ranked as more expensive and budget ones, are designed on the basis of the URAL-5557 chassis (6x6) with a YaMZ-536 engine with a power of 310 hp. With. They have a transport speed of 60 km/h and operate in a 360-degree working area with a load moment of 85 tm. However, their difference in boom dimensions and configuration forms the cost indicator.

Thus, the price for a KS-55732-33 truck crane starts at 9,010,000. For this amount, the client receives a machine with a boom capable of lifting 6 tons to a height of 33 meters. At a maximum reach of 31 m, the load capacity is 800 kg, and at a minimum reach of 8.1 m - 6.6 tons. The nominal speed of lifting and lowering the load for this model is 7 - 42 m/min.

The cost of a KS-55732-28 truck crane starts at 6,500,000 rubles. When equipped with a 28.1 m boom, the machine is capable of lifting 5.9 tons of cargo at a nominal speed of 7 to 42 m/min. At a maximum reach of 26 m you can work with 500 kg of cargo, and at 8 m - with 7.4 tons (data without counterweights).

By the way, these cranes are optionally provided with a set of counterweights weighing +1t +3t + 1.4t, as well as a 7 or 10m jib and equipment for working with dangerous goods weighing no more than 20t.

This year, Chelyabinets truck cranes were optionally equipped with electric motors powered by a 380V network.

XCMG truck crane

Among the 25-ton truck cranes, this company in Russia is represented by two popular versions: XCMG QY25K-II and XCMG QY25K5S. Each of them is valued by builders in its own way, although its cost exceeds its Russian counterparts.

For example, on online platforms from official representatives of the manufacturer, the price for an XCMG QY25K-II truck crane starts from 11,900,000 rubles, and for the XCMG QY25K5S model - from 12,045,000 rubles.

Both representatives of the 25-ton segment are characterized by being tied to currency fluctuations, which is why the cost may change upward.

According to the latest forecasts, like foreign manufacturing companies, the Russian engineering sector is already preparing potential customers for price increases in April 2022.

For now, price tags remain in check, but some manufacturers of truck cranes have already informed consumers about an increase in the cost of their products by 3-5% and are conditioning this step not only on the situation with COVID-19, but on the inevitable increase in the cost of components and chassis.

And whether CMUs can replace truck cranes and vice versa - you will find out in this material.

If you find an error, please select a piece of text and press Ctrl+Enter.