How to replace fishing line in a trimmer reel • EVDIRAL.RU

Replacing the trimmer line: step-by-step instructions for replacing the line on the trimmer

How to replace fishing line on a trimmer

Trimmers (aka lawn mowers) are actively used by modern society to care for lawns and other similar gardening facilities. The tool is noted for its high efficiency, despite the dubious quality of cutting grass (compared to an ordinary peasant scythe - earth and sky). The main advantage of trimmers (lawn mowers) is high productivity with little physical effort required by the operator. However, over time, the trimmer's (nylon line) wears out or becomes damaged, rendering the trimmer a useless tool. Hence, the task becomes urgent - how to replace the trimmer head and how to replace the line of the trimmer head? Let's look at this process using the example of lawn mowers manufactured by Black and Decker and others.

Step two: winding the cutting material in sections

The next step is to wrap the line around the reel, being careful. It is necessary that each half is filled with its “own” winding, evenly, without intersections. Usually on the body of the winding drum you can see arrows indicating the direction of winding. This point should be kept in mind when filling the reel with fishing line.

Final point of instructions

Typically, the process of replacing fishing line on a trimmer of a particular model is popularly described in the accompanying documentation. Another issue is that this documentation is often supplied in a foreign language, since the notorious lawn mowers for the most part are imported products.

Meanwhile, there is a much simpler, more economical and beneficial way for human health and nature - tidying up lawns with an ordinary peasant scythe. Scythe Blade:

does not “tear” grass stems,
does not uproot plants,
cuts carefully

which is subsequently accompanied by abundantly growing greenery, and not the formation of dead wood as a result of the work of a trimmer.

Using materials: SGS-Engineering

How to replace fishing line on a trimmer?

Replacing the trimmer line with step-by-step instructions will allow even an inexperienced lawn mower owner to perform quite complex work.

However, before starting work on replacing the fishing line on the trimmer, it is necessary to ensure the safety of the work. In particular, measures should be taken to protect against careless or unintentional starting of the lawn mower:

prevent spontaneous startup,
remove the battery (if applicable),
Place the tool on a platform convenient for work.

work on replacing the trimmer when the lawn mower is lying on the table, and the master who is replacing the trimmer line has the opportunity to approach the tool from any side.

Step one: fastening and styling

Fold the end of the fishing line in half. Place the workpiece over the spool on each side of each half of the winding area. Wrap both halves completely around the winding drum. Pull the line through the loop.

The procedure for preparing the line engagement in the area of both winding sections of the drum. The loops are placed in specially made cutouts, after which the fishing line is wound in each zone

It is enough to pull the line tightly and place the knot in the groove made on each side of the winding drum.

How to replace fishing line in any trimmer

How to replace fishing line in any trimmer So, first unscrew the nozzle. This must be done by rotating the drum to the right. Here we have a drum in our hands with the remains of an old fishing line. Let's open it. Most often, the lid is closed with latches, which can be opened using a screwdriver by inserting it into the holes and pressing lightly. Or you need to release the lock and turn the cover in the direction of the arrow. In this case, the lid itself must be held, because in drums with automatic line feed there is a spring, which, when straightened, can throw out all the internal parts of the drum. Carefully taking out the reel, we remove the pieces of fishing line from it.

Now you need to take 5 meters of new fishing line and fold it in half (to find the middle). In the middle part of the reel there is a recess (in some designs - a hole) into which you need to hook our fishing line. There is also an arrow on the reel indicating the direction of winding. An important detail - if the reel has two compartments, then one half of the fishing line should be wound in one direction, and the second in the other. When finishing winding, you need to leave 15-20 cm of fishing line free. There are also two notches on the top ring of the reel through which you need to pass these risers. We dealt with the winding itself.

The last step in the line replacement process is to assemble the reel. First you need to install the spring and washers in place. Then, holding the reel with one hand, with the other you need to thread the ends of the fishing line into the corresponding holes on the sides of the nozzle. After this, install the reel in its place, tensioning the line and trying not to displace the spring. When all the internal elements of the nozzle are in place, you can close the drum with a lid. You just need to put some effort into getting the latches into place. Voila! The mowing attachment is ready to go! When choosing a fishing line for your motor scythe (gasoline or electric), you should pay attention to some points, which we will discuss in detail.

Line diameter. The engine power determines the maximum diameter of the fishing line that can be used for a given braid. For example, the manufacturer of an electric trimmer with a power of up to 1 kW recommends using a ø2 mm line, and for values around 500 W - only ø1.5 mm. Also, the manufacturer of any powerful trimmer with a curved rod recommends using ø2 mm fishing line. A gasoline engine is more durable than an electric one, which is why you can install thicker and therefore stronger lines, which allows you to mow more grass and work longer. For lawn cutters with a straight shaft, you can select fishing line using the following simple algorithm: the engine volume in tens of cubic centimeters corresponds to the diameter in millimeters. For example, for a Husqvarna 128R lawnmower, the engine capacity of which is about 25 cm3, a line of ø2.5±0.2 mm should be used. For more powerful brush cutters with volumes of more than 40 cm3, the diameter of the line is limited only by the geometric dimensions of the outlet holes of the mowing head - no more than 4 mm. So, a thin line (about 1.5 mm) cuts well cultivated lawn grass, and a thick line (for example, 3.0-3.5 mm) successfully destroys weeds and even young shrubs.

READ How to Correctly Adjust the Trimmer Belt

Line shape. The simplest and cheapest to produce is round fishing However, ergonomic and environmental requirements limit its use - due to its physical properties, it creates an unacceptably high noise level (which is comparable to the noise of the engine itself). These are the classic round line from Husqvarna or Oregon RoundLine or Chipmaster. To reduce the noise level produced by the fishing line, it is given a special shape - it is made spiral-shaped like the Oregon DuoLine Plus (noise level reduction by 15 dB) or with special transverse grooves like the Husqvarna Whisper (-8 dB). Following the school laws of physics, the “working” part of the fishing line during the mowing process is only the end surface, and not the side surface. However, to increase the “sharpness” of the fishing line, i.e. to increase efficiency, the cross-section is changed from round to faceted: star-shaped, square or square with teeth - Oregon StarLine, Nylsaw or Flexiblade. For example, according to expert calculations, Oregon Nylsaw fishing line, thanks to its square profile, is 27% “sharper” than its round counterpart, which clearly affects the increase in mowing speed.

Manual petrol mower. Replacing line in reel.

#replace #any #diameter #shape #trimmer #mower #for #spool #mow #repair #motor #replacement

String breaking

the presence of hard objects in the mowed grass: branches, stones, etc., contact with which breaks the string;
mowing the grass close to the fence, and if it is mesh, then the fishing line breaks even faster;
low-quality cord - replacement with a new reliable consumable material is necessary;
wear of the outlet holes in the mowing head, as a result of which the line breaks due to friction against the sharp edges of the bushings - the part needs to be replaced with a new one.

Types of trimmer heads

The heads of the scythe can also have different devices: with automatic line feed, semi-automatic or manual. In the first case, in order to lengthen the working ends of the thread, it is necessary to slightly reduce the speed. And when you add them again, the line will extend automatically. For semi-automatic devices, you need to press the special button located below. It is not necessary to turn off the trimmer. It is enough to simply hit the scythe on the ground. The most inconvenient to use are trimmers with manual string feed. To lengthen its working ends, the tool must be turned off and the operation performed manually.

Another spool of line for the trimmer

It happens:

single-string - suitable only for cosmetic trimming of the local area;
two-string - used for more serious work on clearing the area of grass.

A ring needs to be cut out of thin but durable plastic, and its inner diameter should be equal to the thickness of the core on which the fishing line is wound, and its outer diameter should be equal to the diameter of the reel.
On the inside of the ring you need to make a small notch through which the thread will be threaded.
Next, the ring is cut and put on the reel. And the incision site is glued with tape or soldered using a hot knife. That's all - now each end of the fishing line can be wound onto its own part of the reel.

Line winding algorithm

The order of winding the fishing line depends on the type of reel - with one or two antennae, as well as with automatic charging of the cord.

On a trimmer head with automatic refilling

For heads with automatic threading, you just need to wind and clamp the edges of the fishing line, and the tool will perform further winding on its own when turned on. It is impossible to make a mistake here, because the coil itself recognizes how the antennae should be positioned.

On a note! The advantages of trimmers with such a head include the convenience of laying the cord, but the disadvantages are high cost and difficult repairs.

What is needed to replace the cord

With regular use of the trimmer to cut grass, the discs become dull, but they can be sharpened and continue to be used. The line in the reel tends to run out, so there is a need to refill a new one, for which you need to determine the type of head and prepare a cord of the required thickness and length .

So, the mowing head is a cylindrical body in which a spool with fishing line is located. This detail is present both on electric trimmers and on gasoline scythes of any brand, be it Bosch, Makita, Stihl or another brand. There are three types of heads depending on the method of threading and feeding the line.

The operating principle of the automatic group heads is that they independently feed the line when the mower reduces the engine speed. Such designs are convenient when working on large areas, but have the disadvantage of high cord consumption.
The heads of the semi-automatic group are easy to operate - automatic line feeding is performed at maximum engine speed. To unblock the cord, you need to gently tap the tool on the ground, after which the unlocked thread moves out of the spool. Trimming to the required length is done with a knife mounted on a protective casing.
Trimmers with manual line feed must first be turned off, and then pull out the line yourself.

On a note! The most convenient and best priced are semi-automatic cord reels.

Reels for electric and gasoline streamers can be with one or two tendrils of fishing line. The former are used for trimming low grass growth, the latter - for mowing tall grass and small shrubs.

Replacing fishing line with disk

Depending on the type of vegetation covering the garden area (lawn) and requiring removal, the fishing line changes to a disk. This is necessary, since the cord is used only for grass of small height, and if you need to mow tall growth, tree shoots or shrubs, it is better to use metal or plastic disc knives instead of a cord. Installing them correctly is very simple, the detailed process is usually described in the user manual and is similar for different brands of trimmers, be it Al-Co, Oleo-Mac, Patriot or another brand. To change fishing line to knives you need:

block the shaft and remove the coil by turning it clockwise;
put the knife on the sleeve;
Install the fixing cover and tighten the nut in a counterclockwise direction, and then tighten it with a wrench.

You can read in detail how to change a spool of fishing line to a disk in the operating instructions for the device.

Types of reels according to their correspondence with lawn mowers

In addition to the methods of charging and feeding the cutting cord, mowing sets are divided among themselves according to their compliance with different models of trimmers. The following reels are available for sale:

original – suitable only for certain models of brush cutters. It will not be possible to use them for installation with other trimmers due to mismatched threaded connections;

universal – these models can be installed on any lawn mower. A universal reel costs a little more, but it can be used alternately by several owners of different lawn mowers.

Most often you can find original coils from the brands Stihl, Husqvarna, Oleo-Mac, and Echo on sale. In turn, universal mowing sets are produced by Champion, Shindaiwa, and Partner.

How to properly change line on a trimmer

A trimmer is a convenient and easy-to-use tool for cutting grass and trimming small bushes and trees. It often uses fishing line (string, cord) as a cutting element, because it costs less than disc knives and is safer to use. If you use the tool intensively over time, you will need to change the line on the trimmer. This process is similar on mowers from different manufacturers, be it Husqvarna or Huter, with minor differences possible.

Preparing to replace fishing line

Before replacing the fishing line, you need to pull out and then disassemble the head. Typically it includes a casing, a spring (on some models), a spool with fishing line, and a cover. It is necessary to unplug the electric trimmer (or turn off the gas trimmer), and then begin to remove the coil. It can be fixed in two different ways: in the first case, it is necessary to completely disassemble the head, and in the second, just remove it from the gearbox shaft on which it is attached.

find the latches on both sides, press and remove the cover to open the internal structure of the head;
there is a bobbin under the cover, it must be carefully pulled out of the case (sometimes a spring is hidden under it, it should also be carefully removed to the side so as not to be lost);
after removing the spool, a fixing bolt (or screw) becomes noticeable in the center of the body, which must be unscrewed in the direction opposite to the clockwise movement;
After removing the fasteners, you need to hold the housing and remove the coil from the gearbox shaft with rocking movements.

How to replace line in trimmer reel

The second method involves the following steps. The coil head is mounted on the gearbox shaft. To disconnect it, you need to lock this shaft. Usually in braids, for example, brands “Champion” or “STIHL”, a hole is made for this purpose, into which a nail, rod or screwdriver is inserted. After fixing the shaft in a stationary position, you need to hold it by the body and begin to rotate the head clockwise, since the thread on the shaft is usually left-handed.

Now that the head has been removed and disassembled, it is necessary to determine how thick the cord should be. You can find out the appropriate diameter for your trimmer by looking at the user manual or at the bobbin itself; usually similar information is indicated on it. Another way is to insert the thread into the hole from which it is fed. If shit goes without any difficulty, it can be used for work.

On a note! To understand how much fishing line to wind for a reel, you need to wind it onto the bobbin so that the height of the skein is not greater than the diameter of the sides. If the cord protrudes beyond the edges, the reel cannot be hidden in the casing.

Types of semi-automatic heads

A semi-automatic mowing head usually consists of a housing, inside of which there are several springs and a spool. Spools, according to their design, are divided into:

single-section – in devices of this type, the cutting line used is wound evenly;

two-section – in these spools, each end of the cord must be wound separately, onto the part intended for this. Two-section spools differ from single-section spools in durability and ease of operation. In addition, the fishing line inside them never bends or gets tangled.

Many owners of household trimmers convert single-section spools to two-section ones. To do this, you will need to find a durable metal plate and apply a contour with the diameter of the spool on it. After this, the plate is cut along the contour so that the thickness is near the place where the cord is wound. As a result, the resulting circle should move freely around its axis. Next, you will need to make a cut on the resulting ring and insert the spool inside the ring. Both parts must be connected to each other using tape or quick-drying glue. As a result, the manufacturer will have a spool in which the line can be wound into two sections.

Fishing line - varieties and the possibility of replacement with other material

The cord for the trimmer can be of different diameters (from 1.2 to 4 mm), and you need to choose it depending on what kind of vegetation needs to be mowed - the thicker the line, the coarser the grass it will cope with. Experienced users recommend using a fishing line with a thickness of 2 mm, which is universal.

The shape of the fishing line can be round (for lush grass) or with sharp edges in the form of a square or star (for mowing dry grass). The second type is less durable and wears out faster compared to round cord.

READ How to Lubricate the Shaft in the Patriot Trimmer Bar

One of the popular questions regarding the operation of trimmers is whether it is possible to replace the special cord for mowers with other materials, for example, metal or steel cables and strings, wire, etc. You need to know that installing such items is not recommended, because with them the trimmer turns into a dangerous technique. During mowing, pieces of wire or metal will constantly break off and fly in different directions, risking injury to the worker. And if you accidentally touch your limbs while working, serious injury is guaranteed.

For trimmer owners wondering whether it is possible to use fishing line, the answer is that this is allowed, but it will tear and wear out much faster, and therefore require frequent replacement.

Advice! Fishing line is well suited for cleaning grass near a fence or metal mesh - instead of wasting expensive trimmer cord, you can load large-caliber tackle (2-3 mm), which costs much less.

AutoCut mowing head

The two-string model is designed for mowing and clearing areas. Its four-string modification is suitable for trimming near obstacles (stairs, walls, thresholds, curbs) and processing large areas. It differs from the previous design by automatically adjusting the length of the cutting strings - right during operation. To supply a supply of fishing line, you need to touch the bottom edge of the mowing head to the surface of the ground. This will loosen the cord lock and it will move out under the influence of centrifugal force.

What line do you use for the trimmer?

There are several types of fishing line:

The most durable is round;
For mowing soft vegetation – curly;
For mowing thin grass - with notches;
Special – suitable for certain types of trimmer.

The cross-section of the cutting thread must correspond to the vegetation that needs to be mowed.

If it is necessary to replace the fishing line, then it is necessary to select exactly the type recommended by the manufacturer of this particular trimmer , that is, the thickness of the cutting thread must be suitable for the engine power and the size of the unit.

How to disassemble the trimmer coil. Replacing the fishing line on the trimmer.

It is better to choose a specialized cutting thread. It is worth soaking the line for a while if you plan to replace it in the reel.

After soaking, it acquires an elastic appearance and becomes stronger.

The cutting thread can be made from different components. The most common among them is nylon.

This material is characterized by a high degree of wear resistance, the ability to withstand various temperatures and high loads.

Nylon fishing line can be stored for a long time; it does not dry out or lose its strength.

Therefore, its service life can be quite long.

Reels or heads for brush cutters have different structures:

Single string. In the modification of this trimmer there is only one working line. This unit is used mainly for small jobs, such as trimming grass.
Two-string. They can be either automatic or semi-automatic. Here the package includes two strings. This trimmer is used for mowing and clearing areas.

Instructions for correctly winding the cutting thread onto the trimmer spool:

First of all, you need to disassemble the head. To do this, press the latch and turn the cover to the side. Next, the spool is removed.
Measure the required amount of cutting thread and insert it into the slot.
Wind the fishing line on both sides in the direction of the arrow.
The ends 15 cm long should be left unwound.
These ends are inserted into opposite slots.
The ends are then secured into the hole in the head.
After which the spool is carefully inserted into the body, to do this you need to lightly press it.
If necessary, you can pull the remaining ends of the thread out. To do this, first pull one end of the thread and then the other so that they can easily pass through the slots on the head.
Now you should assemble the grooves on the body and screw on the cover.
Then press the spool and try to twist it until it stops. If you hear a click, the bobbin has clicked into place.
Next, you need to pull the free ends of the thread to the end.

Common mistakes

Although winding line is a very simple task, many beginners may wind the line incorrectly. Below are the most common mistakes.

Many people, when measuring thread, think that 4 m is a lot. Because of this, people often measure out less and therefore end up running out of line. Don't be afraid to measure out too much, because you can always cut off the excess.
In a hurry, some people do not follow the threading grooves inside the spool and wind the thread at random. This leads to the line flying out of the reel and can even cause injury.
For winding, you should use only the appropriate fishing line. This error is the most common. You need to monitor not only the thickness and volume of the fishing line, but also its type. You should not use the first line you come across for winding, which will not meet your goals. For example, you do not need to use a thread on young grass if you need to mow dead wood.
Do not turn on the device until it is completely wound and assembled. Although this is obvious, some people do this to check if everything is done correctly.
In no case should you confuse the direction of refueling, as this will overload the engine, and it will soon fail.

It is common for beginners to make mistakes, so you must follow the tips given in this article.

To learn how to replace the line on your Patriot trimmer, see below.

How to change line on a trimmer

Below we have provided step-by-step instructions for changing the trimmer thread.

The first thing to do is unplug the tool and turn off the engine. Then you need to remove the trimmer head. This can be done by using a simple screwdriver and lowering it into the gearbox hole to prevent the shaft from turning. And then just unscrew

They usually unscrew it clockwise, but different models have different mechanisms, so you may have to twist it in the opposite direction. But if suddenly, for some reason you cannot figure it out, then we strongly recommend that you refer to the user manual to understand how to disconnect it

Second. After removing the mowing head, you need to open it. This can be done using clamps that are located opposite each other. By pressing them, you can remove the head cover, and then pull out the reel from which the fishing line is wound. By pulling it out you can determine what type it is. There are single-section and two-section bobbins

Let's look at how to thread fishing line into a trimmer reel in two ways

So, there is only one option - we load the fishing line into a single-section reel. The prepared piece of thread is folded in half and inserted into the bobbin. Then, we begin to wind both ends in the same direction, which will be indicated by the arrow on the bobbin. At the end of winding, do not forget to check that the different ends of the thread are facing in different directions.

Option two - winding the fishing line on a two-section reel. The pre-prepared thread is divided into two parts, and its ends must be fixed: this must be done by placing them in special fasteners

Winding is carried out as in the first case - along the arrow indicated on the spool. Both sections should be wound so that they do not intersect. Next, the ends of the thread should be secured in grooves and separated on opposite sides

The spring is then inserted into the coil and the whole thing is placed in the mowing head. When placing the reel in the trimmer, you need to carefully hold the spring while inserting the fishing line into the slots in the head of the brush cutter. And finally, it just needs to be secured with the final part, that is, the lid.

After you have threaded the trimmer, you need to check it. If you did everything correctly, everything will work, but if you made a mistake, we recommend that you read the article again, or even better, if you watch the video on how to install fishing line on a reel in a trimmer.

How to remove line from trimmer spool

Over time, the cutting element of the head wears out, and it becomes necessary to pull out the remains of the old fishing line. Not everyone knows how to do this. Our step-by-step instructions plus a video on how to remove the thread from the trimmer spool, which you can find on the Internet, will help in resolving this issue.

It is necessary to disassemble the mowing head

Difficult ? Of course not. But if, nevertheless, doubts creep into you that for some reason you will not be able to do this, then, of course, find and watch a video on how to pull out or how to wind the thread onto the reel of a lawn mower.

READ Which Gasoline Is Better To Pour Into The Echo Trimmer

Slowly completed disassembly of the spool reel without losing its spare parts allows you to move on to the main task - winding fishing line into the reel. The technological features of the spool design and the number of working antennae determine the sequence of actions.

The simplest option and easy sequence of actions:

The dimensions of the reel and the length of the unique factory winding determine the recommended length of fishing line for winding - 2...5 m.
One end of the fishing line is inserted into the fixing technological hole located inside the spool.
The fishing line is wound onto the drum in the reverse direction of rotation of the spool in the direction of the trimmer product - usually, on the inside of the reel, an arrow indicates which direction the winding is being carried out.
A small section of the fishing line is left free to be taken out - it is fixed in a special groove on the inside of the reel, created to hold the winding when assembling the spool into working condition.
The remaining end of the fishing line is passed through the hole in the outer part of the reel.
The reel halves are assembled and put on the trimmer rod.

In this type of spool, you should find the number of grooves for winding line lying on the inside of the reel:

one groove - both tendrils are wound together along one groove;
two grooves - who winds the tendril along a personal groove.

How to replace fishing line on a trimmer, moto braid, electric braid.

Features of using trimmers

A trimmer that mows grass using a fishing line can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, and row spacing in a garden plot.

Such a convenient, and most importantly, effective device as a trimmer exists in several variations:

As the names suggest, the types of trimmers differ markedly from one another. But regardless of the type of this tool, its cutting element may be fishing line . Of course, the line threaded into the trimmer reel is not endless. And sooner or later it will need to be replaced with a new one.

The consumption of fishing line directly depends on the frequency of use of the device and the scale of the work performed. The more grass is mowed and the more often it is trimmed using a trimmer, the more actively it uses fishing line . And, accordingly, the faster it will end. In this regard, the question arises: how to thread the fishing line into the trimmer reel?

Not everyone knows the answer to this question. But winding the fishing line onto the reel plays an important role in the operation of the trimmer. For the device to function properly, it is very important to correctly wind the new line onto the reel. How to change the fishing line on a trimmer will be discussed in this article.

The first method of winding fishing line

The required amount of fishing line has been cut off. Now you need to carefully examine the bobbin to understand what type it is. It depends on how the fishing line is wound around it.

Bobbins come in two types. In general, they differ slightly from each other. Regardless of the type, the coil is divided into two compartments - upper and lower. In the first type, the dividing edge does not close into a ring and has a recess.

In the second type, it is solid, but there are small through holes near it on both sides. The method of winding the thread needs to be studied depending on which of the above types the reel belongs to.

The previously prepared six-meter segment must be bent in half. It is best not exactly in the middle, but in such a way that one half is longer by about fifteen centimeters.
Then the fold must be inserted into the recess in the dividing edge. One half of the line should be at the top of the reel, the other half at the bottom.
Now you can proceed directly to winding. You need to wind in the direction the arrow on the bobbin points. When winding, you need to hold the threads so that they do not intertwine and the upper half is wound into the upper part of the spool, and the lower half into the lower part. Each half should have about fifteen centimeters free from the end.
At the top edge of the bobbin there are small recesses (or, in other words, grooves) for securing consumables. The ends of the threads must be inserted into these recesses so that they are secured one opposite the other.
The final stage of filling consumables into the tool is to insert the ends attached to the bobbin into the corresponding holes in the trimmer head.
That's all. The winding process is complete. Now all that remains is to assemble the head into a single whole. The spring is carefully placed back between the bobbin and the head. Then you need to insert the bobbin into the head and press them together.
It is recommended to pull the free ends of the thread outwards further. To do this, you need to pull the ends of the consumables one by one so as to remove them from the bobbin grooves. You can make sure that the cutting element is removed from the retaining grooves by trying to pull the threads out a little - they should come out freely through the holes in the head.
While pressing the bobbin down, you need to put the cover over it. The cover must be screwed to the head so that all the grooves on their bodies align and the bobbin remains fixed between them.
And finally, the very last step is to screw the head back into place at the bottom of the tool.

The process is complete. The line is threaded into the reel. The trimmer is ready for further work.

How to Thread Line into the Reel of a Semi-Automatic Trimmer

Warranty production of the trimmer's factory refill will inevitably require a line change. Having a very rough idea of how to thread the fishing line into the trimmer reel without the help of others, newbies reluctantly take on this task. But with certain abilities, mastering this simple science does not present any difficulties, and a similar abstract presented below will greatly facilitate this process.

First, to wind the fishing line, you need to remove the reel (spool, spool) from the trimmer - certain steps will depend on the complexity of the configuration and the type of the product itself:

small electronic trimmers with a working arrangement of the motor and coil at the bottom usually have side buttons on both sides of the reel. When they are pressed simultaneously, the upper part of the reel, together with the internal contents for winding the fishing line, is disconnected, although the lower part remains on the trimmer. It is better to disassemble the bobbin on a flat, smooth place, so that the spring included in the design does not jump out or even get lost;
electronic and gasoline trimmers with a curved rod without the ability to install a knife, you have reels with a special wing: in similar designs, you should hold the spool in a stationary position with one hand, and with the other turn the wing nut that locks the bobbin on the rod counterclockwise. After disconnecting the nut, the entire bobbin is removed.
electronic and gasoline trimmers with the ability to install a knife on a straight rod (for example, STIHL trimmers) have a hole under the reel. To keep the rod stationary, a screwdriver or other suitable object is inserted into this hole, and with a slow rotation, such mutual placement is achieved when the screwdriver goes inside the hole and the reel is fixed. Then the coil body is rotated clockwise (with a left-hand thread) and removed from the trimmer.

How to wind line on a trimmer reel

A trimmer is an excellent solution for those who have a large garden or lawn near their home that needs to be trimmed constantly. But like any other tool, sometimes it requires intervention. After some time, there will be a need to replace certain elements, and this will have to be learned.

How to do this? To replace the main cutting element, you must first select the right one. In principle, the user manual for the brush cutter should indicate the diameter of the thread that should be used in it.

When you have purchased the required cutting element, try to install it correctly. It should be noted that there are a huge number of videos on the Internet that will help you figure out how to properly thread the fishing line into the trimmer reel.

Modification of trimmer heads

Trimmer mowing heads can be of various modifications: single-string for trimming the lawn (mows with one strand of fishing line); two-string for mowing grass and clearing areas with automatic line feed or manual adjustment of string length.

Modern manufacturers are increasingly offering gardeners universal trimmers with two-string automatic mowing heads.

Step-by-step instructions for threading fishing line into a trimmer

Push the clamps in until they click and remove the cover from the mowing head.
Carefully turn the coil, it will release from the holder, and now remove it.
Cut two identical pieces of fishing line (the edge of the fishing line should be cut at an angle - this will make the work easier). Take one of them and insert the end of the fishing line into a special pocket on the reel (there may be hooks, eyes, clips). Next, wind the string in the direction of the arrows. Distribute the fishing line evenly and tightly. Fasten the end of the string into the specially provided hole in the reel.
Do the same operation with the second part of the fishing line, only tuck the end onto the reel from the opposite side.
Return the spool of line to the mowing head. Pull out the ends of the fishing line through the holes in the reel and thread them into the special connector of the head.
Gently straighten the line and close the lid. Cut off the excess fishing line, leaving 12-15 cm of each edge.

All is ready. The trimmer is loaded with line and ready to go. Now you can happily start mowing your favorite meadow, country corner, or local area.

Manual petrol mower. Replacing line in reel.

It is only important to remember that how you thread the cutting line into the trimmer will determine not only the quality of the work performed, but also your safety.

Types of reels according to the method of feeding line

Most amateur and household lawn mowers have a simple design. They consist of a motor, a rod in which a flexible or rigid drive shaft is located, a handle and a cutting element, the role of which is often played by the trimmer head. Based on the principle of line feeding, the heads are divided into the following types:

manual - this type of headset got its name due to the fact that the cutting cord in it is fed manually. Each time it is necessary to lengthen the line, the operator must stop working with the trimmer and pull it out mechanically. This brings its own inconveniences, but this type of device is considered the most popular among gardeners. Hand reels differ from analogues in durability and low prices;
semi-automatic – when working with heads of this type, you can lengthen the cord by pressing the headset to the ground. During this, a button is pressed, which activates the anchor mechanism. It creates a centrifugal force that pushes the cord outward. The semi-automatic head for the trimmer has one important advantage - when using it, you do not need to stop working with the brush cutter, since the line can be extended while the engine is running. The only drawback is that the semi-automatic cutting set costs a little more than manual reels;

automatic – standard devices of this type are easy to use. To lengthen the cord, the operator just needs to slow down the engine speed of the brush cutter. The automatic factory coil for the trimmer differs from its analogues in its ease of operation. However, the prices for this type of headset are the highest on the market.

Each of the listed types of cutting devices is suitable for use in certain conditions. Hand heads are best used in areas with hard obstacles. The low cost of this type of headset will make it possible to buy several manual heads at once, and change them one by one as they fail. Automatic models, on the other hand, are quite expensive, so they are best used for cleaning clean areas.

How to wind fishing line into a trimmer?

When threading a fishing line for the first time, this process may seem quite labor-intensive, but with time and skill the task is solved much faster.

In order to thread the fishing line, you need to:

Take the coil and unscrew its cap. Some reels are threaded to the left, so the cap must be unscrewed in the required direction.
Measure out five meters of fishing line;
Fold this segment in half, that is, determine where the middle is;
Next, place this middle of the fishing line in a special hole on the reel;
Wind the fishing line in the direction the arrow points;
If there are two places for winding, then the first part of the fishing line should be wound on one half of the reel, and the second part on the other half;
Insert both ends of the fishing line into the holes of the reel;
Screw on the lid.

Sources:

https://salda.ws/video.php?ID=sQSXwkTkJ-k https://eco-podarki.ru/post/kak-zamenit-lesku-v-trimmere.html https://yasenevo-flowers.ru/ navesnoe-oborudovanie/kak-zapravlyat-lesku-v-katushku-trimmera.html

You can see the material

A little advice. Try not to let the line collide with hard objects while cutting. With this contact the line will be cut. And since this trimmer the line automatically, every time you have to stop working, remove the spool and release the line again.

Space to store a spare spool

Installing such line into a reel is very simple internally inside the reel. Insert the center of the mowing line with a metal fastener into the top of the reel, and draw the ends of the mowing line along the grooves and bring it out.