Features of the MTZ Belarus 09N walk-behind tractor: device characteristics and owner reviews about use

What could be cooler than agricultural equipment produced in Belarus? These are leaders in production in this direction and the Minsk plant has its own walk-behind tractors, which few may have heard of. Their production started in 1992, the story began with the 0-5 model, but today the MTZ Belarus 09N walk-behind tractor remains one of the most promising.

Let's immediately talk about the external design, because it looks like a mini-tractor. With large wheels, the tread of which resembles a real tractor. Just because of this moment I already want to take it and start working on it. According to some reports, the MTZ-09N walk-behind tractor even appeared in the USA.

The most reliable and durable design that is durable. The body of the unit was made of high-alloy steel, the total weight of the walk-behind tractor reached 179 kilograms. The device is compatible with many attachment options. Despite its menacing appearance, the MTZ-09N operates surprisingly quietly compared to its competitors.

The Belarusian plant and its engineers thought closely about the comfort of the operator, so all the levers are placed so that it is more convenient for the owner to operate. The MTZ Belarus walk-behind tractor is tall, because its ground clearance reaches 29.5 centimeters, which is a lot. The maximum unit can support up to 650 kilograms of attachments.

Many people often wonder when choosing which MTZ walk-behind tractor is better today; to be honest, the choice is not huge and the 09N is promising.

Description of models

The model range of MTZ walk-behind tractors includes devices with different capacities: 05, 06, 07, 08, 09, 10 and 12. Among these models, units with indices 05, 06, 08, 09 and 12 are popular. Today, the most common axle units produced are Minsk plant, are devices 09 and 06.

Potato digger for walk-behind tractor

to menu

Motoblock MTZ 05 Belarus

The unit was produced from 1978 to 1992 and was intended for the preparation of light soil for sowing, cultivation and inter-row cultivation of beets and potatoes of a small area. The device is also used for harvesting hay and transporting goods.

The design of the equipment is built on a single-axle chassis. The device is designed like a mini tractor and can carry a trailer with a load of up to 500 kg. MTZ 05 walk-behind tractors are equipped with a power take-off mechanism at a rotation speed of 1000 rpm, which allows the device to be used as a drive for stationary devices: animal feed grinders, wood processing machines and pumps.

MTZ 05 works with different types of attachments:

• cultivator KR 70;
• plow PL 1;
• trailer PH 0.5;
• mower KN 1;
• harrow BN 50;
• hiller KO 2.

Specifications:

• engine life – 3000 hours;
• fuel consumption – 340 g/kW h;
• fuel tank capacity – 5 l;
• dimensions – 1800*850*1070 mm.

Motoblock MTZ 05 Belarus

to menu

Motoblock MTZ 06 medium-heavy

MTZ 06 is a representative of single-axis devices, which is used for agricultural and farm work on small plots of land. The latest model of the MTZ 06 MKR unit is equipped with a WEIMA 177F engine and is very popular in the markets of post-Soviet countries. The device cultivates the ground to a depth of 0.3 m with a surface working width of 1.1 m.

The ability to install wheels and a cutter for the MTZ walk-behind tractor allows you to use the device for cultivation, soil preparation and processing of agricultural plants. The design of the mechanism allows the installation of ballast weights and changing the wheel track width. For greater operator comfort, the cultivator is equipped with a support that reduces vibration during operation, as well as vibration-isolated handles.

Specifications:

• fuel consumption – 1.8-2 l/h;
• fuel tank capacity – 6 l;
• dimensions – 1800*850*1070 mm;
• weight – 95 kg.

to menu

Motoblock MTZ 09 heavy

The MTZ 09N walk-behind tractor is a professional-level model, which is intended for use in small agricultural production, in public utilities for removing snow or garbage, and also for transporting goods.

Motoblock MTZ Belorussian 09N with HONDA GX270 9 hp engine.

The main advantages of the 09N unit:

1. Sturdy body and wheels that are inflated with air.
2. It is possible to control the speed of the electric motor.
3. Low noise level.
4. Highly ergonomic controls, which makes it easy to operate the device.

Today, MTZ 09 is equipped with power devices of various modifications that consume AI-92 and AI-95 gasoline. Basically, the unit is equipped with a four-stroke single-cylinder 9-horsepower Honda GX270 unit. MTZ 09N with a Honda engine has a power unit volume of 0.27 liters and a shaft rotation speed of 3600 rpm. Thanks to the increased weight of the unit and the use of standardized elements, MTZ 09 is characterized as unpretentious to lubricants and fuel, a reliable multifunctional mechanism. The device is easy to operate, maintain and repair.

Specifications:

• weight – 176 kg;
• dimensions – 1780*846*1070 mm;
• the ability to change the track width - from 450 to 700 mm;
• fuel consumption – 319 g/kW h;
• The maximum weight of the towed trailer is 650 kg.

to menu

Motoblock MTZ 12 heavy

The purpose of the MTZ 12 walk-behind tractor is to perform a variety of agricultural work on land plots of 5 hectares or more, as well as transport goods and use them in public utilities. The walk-behind tractor has a two-cylinder four-stroke 12-horsepower power plant SK-12, which has a volume of 0.277. The device is not popular, unlike MTZ axle units with lower power. This is due to the production of mini-tractors with similar characteristics and more convenient to use.

The design of the device allows it to be converted into a compact tractor, which is equipped with a power take-off mechanism, which allows the unit to be used as a drive for other devices. to menu

Distinctive features

Equipment from the MTZ plant is produced on the basis of Belarus tractors . The devices are produced in auxiliary workshops. Today it is a large complex that produces a wide range of high-quality equipment.

The first walk-behind tractor went on sale in 1978 . It was called a walking tractor. It was quickly appreciated, noting the excellent quality of land cultivation.

IMPORTANT!

The main distinctive feature of walk-behind tractors is the presence of a tractor chassis, due to which it can be used to transport trailers with large cargo.

The devices are capable of reaching speeds of up to 10 kilometers per hour thanks to four forward gears . For simpler work, a speed of 2.5 km/h is provided. Control is carried out by a convenient steering column. Elements that control movement are located at the top of the structure.

There are three modifications of the cutter measuring 42, 60 and 70 centimeters . The walk-behind tractors are equipped with four-stroke carburetor engines with a three-liter fuel tank.

Power ranges from 5 to 8 horsepower depending on the model. By adjusting the power, you can use not only attachments, but also mills and circular grinders.

Mechanical gear and closed-type multi-disc friction gearbox ensure high-quality transmission.

Efficient operation is maintained by the constant presence of oil in the clutch. The equipment can be supplemented with quick-change additional parts.

The machine easily copes with plowing the land, processing potatoes, mowing grass and other tasks . Locking wheel blocks and an internal power take-off shaft ensure comfortable operation.

When developing the machine, engineers took into account the specifics of the Russian terrain, as well as different types of soil. Thanks to this, the device is equipped with a gearbox that allows it to work on heavy soils.

A durable multi-tooth differential increases the reliability of the cultivator, and a comfortable steering column and wide wheels improve cross-country ability and controllability..

Reliable and high-quality assembly

The walk-behind tractor, unlike its foreign analogues, is distinguished by high build quality. The production of the garden unit is carried out at the Smorgon Plant, the territory of which is located in Belarus in the city of Smorgon.

The initial, very first model of the walk-behind tractor was designed in the 90s, but today the device model 09N-01 is a modern and improved version and has no analogues in the world. To this day, the walk-behind tractor is produced and supplied to the market in: the USA, Lithuania, Venezuela, Estonia, Ukraine and other countries of the world.

This walk-behind tractor model is designed to work with an area ranging from 1 to 5 hectares. The equipment can operate uninterruptedly, around the clock.

Complete set of the Belarus 09N-01 walk-behind tractor model

Self-propelled gardening equipment was specially designed for Russian users. The gearbox is designed in such a way that it can easily move with little physical effort on plowed and heavy soil.

A high degree of reliability, a large number of teeth on the planetary gear, an improved differential and much more allows the walk-behind tractor to compete with world analogues. The walk-behind tractor is easy to control due to wide wheels and a new, improved steering rack. This model comes with the following addition:

• Large universal plow.
• Special soil cutter.
• Harrow and cultivator.
• Rotary mower.
• Motoblock trailer.
• Additional weights.
• Adapter with seat.
• Mounted blade.
• Snow blower.
• A universal hilling attachment.
• Potato digger.
• A utility brush.
• With lugs.

The main advantages of the walk-behind tractor

Most owners of this device have high reliability in this segment. Excellent traction of the wheels with the soil, good steering lock and much more make it possible to control the walk-behind tractor without much stress. The most important thing is to initially set up and adjust correctly, then all you have to do is place the equipment on the furrow and go to the other end of the garden area to meet the device. The walk-behind tractor will do all the work for you.

• High-strength body made of cast iron.
• No cables.
• Cast iron gearbox.
• Reverse.
• Good weight.
• Ergonomic handle.
• Low fuel consumption.
• Low noise level.
• Adjusting engine speed.
• Pneumatic wheels.

The device is reliable and convenient to use. Allows you to save time due to mechanical versatility in basic agricultural tasks.

As for servicing equipment, as many experienced specialists note, no problems arise, and there are no complaints about fuel. Unlike analogues, components and parts are easy to find, which cannot be said about imported walk-behind tractors, even low-class ones.

It is worth noting that many who have already used the walk-behind tractor call it “indestructible”. Heavy, prolonged loads and sometimes poor natural conditions are not an obstacle for the Belarus 09N-01 walk-behind tractor. Having purchased this model, you will be surprised by its working life, it is guaranteed to be impressive. Perhaps one of the shortcomings that is hidden by its reliability is the high price in its segment.

Among the disadvantages are the following:

• Difficult and time-consuming installation of any attachments supplied in the kit.
• According to many, there is a spontaneous disconnection of the differential.
• There are difficulties with shifting the gearbox. It is worth noting that many experts note this disadvantage in almost all imported and Russian models of walk-behind tractors, because the transmission in most models is not synchronized.
• Perhaps this is not a minus - the appearance of the walk-behind tractor model is not very beautiful and many compare it with an old Soviet tractor. Similar models of walk-behind tractors such as Zubr or Neva, according to many, look much more respectable. However, as the manufacturer of these walk-behind tractors notes, their main task is not a beautiful appearance, but its performance characteristics. In terms of power and reliability, the walk-behind tractor model is not inferior to any imported analogue, which may cost much more.

Price for new model

For its line of walk-behind tractors and unlike imported analogues, the device model is built relatively inexpensively. The maximum configuration will cost the consumer up to 100 thousand rubles. The average one costs up to 80 thousand, and the minimum one costs up to 50 thousand rubles. In models with installed Honda engines, walk-behind tractors may be more expensive.

User manual

The MTZ-09N walk-behind tractor is easy to use, however, in order to extend its service life, it is necessary to properly monitor its condition.

• Before each trip, visually inspect it for any defects. It is recommended to check the security of all bolted connections.
• There are often reviews regarding the rapid appearance of rust. After each work, the remaining soil or snow should be removed in order to prevent corrosion from occurring in Belarus.
• The design of the MTZ-09N gas tank provides for fuel intake at a height of 2 cm. This decision by the engineers was made in order to prevent dirt and dust from getting into the fuel system from the bottom of the gas tank. Many owners of MTZ-09N do not know this and write reviews not understanding why there is fuel, but the walk-behind tractor does not start.
• Based on reviews, people often do not pay attention to the oil level. If there is insufficient lubrication of the walk-behind tractor elements, there will be a sharp sound and rapid wear of the parts. This cannot be allowed.
• It is recommended to fill the engine crankcase with 10W-30 series oil. This is a universal all-season lubricant that can ensure reliable operation of Belarus at any time of the year. The volume of the crankcase of the MTZ-09N walk-behind tractor is 0.6 dm3. In order to change the oil in the crankcase, you should completely drain the oil that is there, fill in the flush and let it idle. This is done so that waste residues are removed from the engine. And then new clean oil is poured in.
• During hot periods of the year, it is recommended to fill the transmission with M-10V2 or M-10G2. If you have an M-6z/10V at hand, then it can be used as an alternative.
• In winter, it is recommended to fill in the less viscous M-8G2. As an alternative, you can use M-4z/10V.
• To change the oil, you need to warm up the transmission, then place a basin and drain the oil completely. Then fill the level with a new one and run it through the system at idle speed.
• Regardless of the time of year, it is necessary to fill in 3.6 liters of oil.

You can download the factory operating instructions for the MTZ-09N walk-behind tractor using this link Operating instructions for the Belarus MTZ-09N walk-behind tractor

Device

Run-in

If you have become the new owner of the Belarus-09N, then before using it for the first time you should run it in. Many people are perplexed about this procedure. Why should such a powerful walk-behind tractor be run-in? However, based on reviews and instructions for use, this should be done without fail.

Running in is the key to long-term operation of the MTZ-09N walk-behind tractor. At this time, all its parts fall into place, are lubricated and rubbed against each other.

1. During this work, you cannot use the walk-behind tractor at full power, but should let it work without attachments.
2. Afterwards, you need to run in the attachments, but do not work with them, but simply increase the weight of the walk-behind tractor.
3. Operation can then begin in the field. But the work should be done at half strength. For example, the maximum plow can be immersed 20 cm, and during running-in it should be immersed halfway - 10 cm.

Here is a review of the running-in of the MTZ-09N walk-behind tractor

Important! It is necessary to understand the principle of turning on and off the power take-off shaft; figure this out during break-in. Since the speed of operation of most attachments will depend on the number of transmitted revolutions.

Engine

On the forums there are a large number of reviews from owners of the MTZ-09N walk-behind tractor regarding old-style motors, it has a UD-15 or UD-25 engine installed on it. Now they are no longer relevant and can be replaced. Most often, Lifan or Honda are installed in their place.

Now Belarus-09n is produced with a Honda GX270 engine.

Based on reviews from owners and practice, they are considered the standard for garden equipment engines. It is recommended to install it to replace the old one.

• Its power is 9 horsepower.
• The volume of this model is 270 cm 3.
• The shaft rotation speed when working with a Honda engine is 3600 rpm.

Pros and cons of devices

The mass production (about 350 units roll off the assembly line every month) indicates the demand for the devices. Users indicate the following advantages of the models:

1. Compactness. It is convenient to store self-propelled equipment in a shed or in a garage next to the car - when folded, the walk-behind tractor does not take up much space.
2. Maintainability. Thanks to the simplicity of the device and the availability of spare parts and consumables, minor repairs can be handled by an operator with minimal experience in servicing gasoline-powered equipment.
3. Multifunctionality. Additional equipment is necessary to expand the range of tasks performed.

Belarusian walk-behind tractors are not without shortcomings. Users highlight several flaws:

1. Lack of gear synchronization in the gearbox. The different angular speeds of the shafts mean that the speeds are sometimes difficult to switch.
2. Imperfect differential lock. Design defects make it difficult to turn the device in a limited space, which increases the load on the operator.
3. Limited access to the coupling unit. Lack of free space complicates aggregation with attachments.

Manufacturing company

The Minsk Tractor Plant, which produces this new model, has more than half a century of experience in assembling tractors and related equipment. To date, the MTZ company is one of the eight largest manufacturers of agricultural machinery. Its share in the world tractor market is 10%.

Actually, this company has been producing walk-behind tractors since 1992. More than 400 units of this equipment leave the assembly lines of MTZ factories every month. Belarus 09N walk-behind tractors are supplied not only to the countries of the former USSR, but also to a number of South American countries.

Range of engines and transmission

Models of walk-behind tractors were equipped with their own power plants. The main internal combustion engines installed on manual MTZ equipment:

1. UD-15 (25). A line of multi-purpose small-displacement, four-stroke carburetor engines produced by the Ulyanovsk Motor Plant. The design was based on the internal combustion engine from the Zaporozhets ZAZ-965 compact car. The engine featured an overhead valve fuel injection and exhaust gas exhaust system. Cooling is air.
2. SK-6 (12). One- or two-cylinder engines produced in Kazakhstan in the city of Petropavlovsk. The motors have overhead valves and air cooling. The MTZ-06 walk-behind tractors have a modification with an engine from the Chinese manufacturer WEIMA 177F. The latter is equipped with a more convenient gas distribution mechanism design and a simple start system.
3. Honda GX270. Representative of the Japanese market of gasoline and diesel vehicles, which is installed on the popular device - MTZ-09. This engine has an OHV design with two valves, a complex air intake system and a multi-chamber exhaust system. This reduces exhaust emissions and reduces operator exposure to noise/vibration.
4. In addition to the Japanese unit, the MTZ-09 model was equipped with Lifan LF177 and Kipor KG280 engines (both China) with similar characteristics, and a Belarusian DK-7 engine, which had a lower price and was not widely used - Motor Jikov GH 1509 (Czech Republic).

Torque is transmitted to the transmission through a permanently closed disc clutch located in an oil bath. The walk-behind tractor has a gearbox with 4 forward and 2 reverse gears. This variability contributes to the selection of optimal operating modes of the device. The final drive is equipped with a differential to make turns easier.

Characteristics

General description of model 09N

A more modern appearance and improved technical characteristics are what distinguishes the Belarus 09N walk-behind tractor from the previous model 05N. Feedback from farmers about this unit is also extremely positive.

“Belarus 09N” is a universal unit intended for use mainly in small and medium-sized agricultural enterprises. Unlike conventional cultivators, it can be used to perform a wide variety of agricultural work - from plowing the land to harvesting.

If necessary, this convenient walk-behind tractor can easily be converted even into a mini-tractor. For this, a special adapter with a seat is used. With such an addition, a summer resident or farmer has the opportunity to perform agricultural work with maximum comfort. Indeed, in this case, there is no need to follow the walk-behind tractor on foot across the entire field. The advantages of the 09N model, among other things, include the fact that it is suitable for both adapters designed specifically for MTZ and universal equipment of this type.

Modifications

In 1992, the MTZ-09N was equipped with standard factory engines UD-15 or UD-25. The second was a more powerful two-stroke engine. However, today they can no longer compete with modern models. And there are many video reviews regarding the need to replace the motor, and how best to do it.

Now the most popular Belarus-09N engine is the Honda GX270. This engine model is designed for long-term and continuous operation. It runs on high octane fuel (92 or 95). The power of the Honda GX270 is 9 horsepower, and the maximum crankshaft speed is 3600 rpm.

Select the desired product option

The neighbors will envy you, your wife will praise you!

This result awaits you if you buy a MTZ Belarus 08H walk-behind tractor. The MTZ 12N walk-behind tractor is the absolute flagship of the new line of MTZ walk-behind tractors.

The new Belarus 13 horsepower walk-behind tractor combines the qualities of its predecessors

All work on your personal plot (no matter what size it is, 5 or 50 acres) is now done faster and easier. With it, you can plow, cultivate, harrow the soil, cultivate crops, mow hay, remove snow, transport and carry out any assigned tasks!

Absolutely new quality and characteristics of the chassis

Indian Malhotra MRL 6.0x12 tires, which are comparable in size to Chinese 6.5x12. MLR wheels represent many years of experience and quality that leaves behind any previously used manufacturer.

The tires for the Indian company's walk-behind tractor MRT 302 RT 6x12 are larger than the Belshina 6x12 and are equal in size to the Chinese 6.5x12 tire, but are many times superior in quality!

Indian tires MRT 302 RT

Motoblocks of this model are equipped with tires on a walk-behind tractor from the Indian brand MRL Tires. The brand has established itself as a leading manufacturer and exporter of agricultural, industrial and off-road tires, as well as light commercial tires and allied materials.

Main advantages of the MRT 302 RT tire

MRL Tires (formerly known as Malhotra Rubbers Ltd.) belongs to the Malhotra Group of Industries, founded in 1954 by Late Shri CL Malhotra. MRL Tires Ltd. known as one of the most reliable and experienced companies in the tire industry. Headquartered in New Delhi, India, it sells to over 85 countries around the world. With over six decades of experience and expertise, MRL has established itself in the tire industry as a provider of quality products and services.

Why is the Belarus 08N walk-behind tractor better than its analogues?

Adjustable control - both rod and reverse with the ability to switch, your choice. Full adaptation to the operator - vertical and horizontal adjustment. The steering bar is the main center of all adjustments.

Controlled fuel supply - the cable drive of the lever allows you to regulate the fuel supply yourself.

The active operating system of the mounted tool - PTO with a rotation speed of 1200 rpm allows the use of such active attachments as: a soil tiller, a segment mower, a screening potato digger, a snow blower and much more.

Differential locking makes control maneuverable and as efficient as possible.

Adjustable track - in three positions 450-600-700 mm allows you to achieve the desired result at any row spacing.

The bevel gear differential has a forced locking type.

The multi-disc clutch of the MTZ walk-behind tractor has a manual control and adjustment mode.

The heavy weight of the walk-behind tractor (Belarus-08H is a record holder in its line) greatly improves traction with the ground and plows the soil both steadily and confidently. A heavier design means using the most powerful engine, and the Honda GX 390 is the optimal powerful option. The use of such a unit as the MTZ Belarus-08H Motoblock will increase productivity by 30-40 percent at the highest loads.

Advantages of the HONDA GX390 engine

The engine of the Belarus Honda GX 390 walk-behind tractor is a legendary engine for mini-tractors and construction equipment. The most expensive and sought after in its class.

The combination of exceptional power, durability and efficiency is HONDA's cornerstone and is also the most durable in even the harshest operating conditions. It is the most modern and progressive. It has been copied for decades, but no one has yet been able to surpass it. The production concept is extremely environmentally friendly and maximum efficiency.

What is good about the MTZ HONDA GX390 engine?

• Heavy duty for its volume.

• Durable components and assemblies.

• All parts of the Honda GX390 have the highest level of reliability.

• Highest efficiency in its class.

• Honda patented technologies.

• Eco-friendly both in production and in operation and care for the environment.

• Full access to consumables and service.

Engine

Reliability in operation and long service life are what, of course, distinguishes the MTZ Belarus 09N walk-behind tractor. The Honda GX 270 engine is a model that has proven itself primarily due to the overhead valve arrangement of the OHV type. Motors of this design are very often used in a variety of types of construction equipment. The engine of the Belarus 09N walk-behind tractor weighs only 25 kg. The cylinder in it is located at an angle of 25 g, has a horizontal shaft and air cooling.

The advantages of this Japanese engine, among other things, include:

• ease of operation;
• ease of maintenance;
• reasonable cost of consumables;
• optimal ratio of power, fuel consumption and efficiency.

The ignition in the Honda GX 270 engine is simple transistor with a manual starter. The strength, and therefore the long service life of the model, is ensured by the use of a cast iron sleeve. The main consumables for this engine are an inexpensive paper-based air filter and one spark plug.

Analogs

Analogs of the Belarus 09N walk-behind tractor include the Chinese Grasshopper 9 hp, the cost of which is several times less than its Belarusian competitor. Also analogues of the model are the Zubr (8 hp), Neva and Centaur MB 2075D vehicles.

Motoblock Forza

2 COMMENTS

I bought a Cascade MB, which I have been using since 1990, to replace it, so I have something to compare it with. The advantages of heavy MB are obvious and undeniable. The Honda engine is simply a miracle, no complaints after 3 years of hard work, the power transmission and chassis are worked out and work fine, with the exception of minor shortcomings, namely: unclear engagement of 1st and 3rd gears and if 1st gear is practically is not needed (sometimes I use an active cutter when cultivating the soil), then the 3rd is the main one for plowing and it takes a long time to find the 1st and 3rd gears. There are more serious shortcomings in the controls and attachments, namely: 1.- the “stop” button fell apart in a week, I turn off the engine by touching the ground with the wire, which is extremely inconvenient; -the travel of the “clutch” lever is not enough to disengage it completely; with maximum adjustment, the clutch either “drives” or slips, which is not great. I cut the rubber on the end of the handle, it became better, but, you see, this is not the level! – the force from the handles to the pipe is transmitted through a box made of thin metal, which was cracked across the entire width – it was necessary to weld reinforcement from an 8 mm square; – the same thin metal has worn through at the engagement point of the differential tooth, which leads to its spontaneous engagement, and this is already dangerous in transport mode (it is completely unexpectedly impossible to turn). 2.- The plow is not thought out at all, apparently “licked” from a tractor. I didn't like the screw adjustment. The MB must move in a straight line, breaking the center line of the MB - the plow (which is supposed to be according to the instructions) forces the MB to crawl out of the furrow, or to climb into plowing. Look at how the plowing width is adjusted on horse plows - the ring in the comb is thrown over, thereby the plow moves to the right (left), changing the plowing width. Next, the plowman holds the plow vertically, on the MB it is rigidly connected to the body with a fairly long lever, when the MB body swings, the plow wobbles noticeably, the furrow is uneven and if it is not corrected during the next pass, a “belly” grows, since the MB wheel repeats the bend of the previous pass . Back in the 90s I saw the work of a “foreign” walk-behind tractor - there the plow share was located horizontally, the blade was thrown to either side, all the adjustments were thought out to the smallest detail. Friends, maybe you shouldn’t invent something that has already been invented and works great! Sincerely.

CHERMET The only advantages are the engine, which is made on the side, and the differential of the wheels. The self-produced box sucks. Shifting gears is problematic + 3 resets, switching to the differential is difficult (you have to swing it to the side for the gears to engage), clutch (either the gears rumble or there is a loss of power) A walk-behind tractor without a box is like a computer without a monitor. The plow and hiller were probably cut out with axes and adjusted with hammers.