| Parameter | Meaning |
| Price per shift | 32 000 ₽ |
| Price above shift | 4,000 ₽/hour |
| Maximum load capacity | 50 t |
| Load moment | 175 tm |
| Boom length | 11.5 - 34.1 m |
| Boom profile | OVOID |
| Maximum reference contour | 7.2 x 7.2 m |
| Minimum reference contour | 6.73 x 5.68 x 4.63 m |
| Crane operating area | 360 degrees |
| Jib length | 9.1-15.1 m |
| Jib angle | 0, 15, 30 degrees |
| Method of transporting a jib | On the boom |
| Max. hook lowering depth | 35 m |
| Maximum reach with main boom (with jib) | 32 m (32 m) |
| Maximum Hook Lift Height - Main Boom | 34.5 m |
| Maximum Hook Lift Height - Main Boom + Jib | 44.4 m |
| Maximum hook lift height - main boom + spacer + jib | 50.4 m |
| Maximum load at which boom telescoping is allowed | up to 6 t |
| Load lifting and lowering speed - nominal | 3.6 m/min |
| Load lifting and lowering speed - maximum | 38.0 m/min |
| Load lifting and lowering speed - landing | 0.15 m/min |
| Turntable rotation speed | up to 1.2 rpm |
| Security device | ONK-160 |
| Maximum counterweight weight | 10 t |
| Set of counterweights | 2.0+2.0+6.0 t |
| Maximum equipment for movement | 4.0+without jib t |
| Equipment for movement under standard loads | No |
| Base car chassis | KAMAZ-65201 |
| Wheel formula | 8 x 4 |
| Chassis base | 1960+3000+1440 mm |
| Chassis engine (EURO-5) | KAMAZ |
| power | 294 kW (400 hp) |
| Transport speed (in single file) | 50(40) km/h |
| Dimensions of the crane in transport position (length x width x height) | 14100 x 2550 x 3980 mm |
| Weight in transport position | 42 t |
| Front overhang angle | 23 degrees |
| Rear overhang angle | 14 degrees |
| Minimum crane weight | 36.50 t |
| Load on 1st axle | 7.45 t |
| Load on 2nd axle | 7.45 t |
| Rear bogie load | 21.60 t |
| Towed trailer weight | No |
| Ability to handle dangerous goods | Yes |
| Operating temperature | from -40 to +40 degrees. WITH |
| Standard crane service life | 13 years |
Advantages of the KS-65713-1 “Galichanin” truck crane
The Galicianin truck crane has the following advantages:
- the crane's cargo winch is 10 percent higher than its analogues;
- The viewing angle of the device profile is a full rotation of 360 degrees, i.e. it has a wide working area;
- the support contour of the crane installation is: 6.7m_5.6m_4.6m;
- The heating systems for the crane operator's cabin have been improved and allow work in cold weather;
- The package of truck cranes includes illumination of the boom head;
- A video recording structure has been installed for handling cargo and work operations;
- The main (basic) package of truck cranes includes a hook suspension with a lifting capacity of 30 tons, as well as an additional hook suspension and a Kamaz chassis.
Truck crane KS-65713-1: review and technical specifications
Crane drive
The crane installation is driven using axial piston hydraulic pumps.
The crane mechanisms have an individual drive with independent control from hydraulic motors and hydraulic cylinders. The hydraulic system of the crane installation ensures smooth control of all mechanisms with a wide range of speed control for working operations. It is possible to simultaneously combine up to three work operations.
Design and characteristics of the crane boom and support circuit
The assembly of booms of automobile cranes of the KS-65713 series is carried out on a specialized high-tech line from TADANO. The metal structures of the boom are completely manufactured in Germany using the most modern technologies using high-strength imported WELDOX steel.
Other critical components of the crane installation and support frame are also made using high-strength steels. The length of the boom in the retracted position is 11.5 m, which ensures the crane's compactness and maneuverability when moving. When all four sections are fully extended, the length of the boom is 34.1 m, which ensures a wide working area and the greatest height of load movement during operation.
The ability to telescope the boom with a load on the hook allows the crane to perform special tasks:
- install loads in hard-to-reach places,
- carry them among mounted structures.
For the convenience of working in cramped conditions, a mode for working with loads is provided with the installation of the crane on supports with the outrigger beams retracted. The maximum size of the support contour is 7x7. This is achieved through the use of outrigger structures with folding support beams.
Thanks to this solution, the crane is able to carry out work with loads in a 360-degree circular zone and, as a result, the number of rearrangements when working on site is minimized.
Using the telescopic jib
Additional equipment of the boom is a telescopic jib with a total length of 15.1 m:
- 9.1 m - stationary part,
- 6.0 m - telescoping part.
The jib can be installed at an angle of 0 and 30 degrees relative to the longitudinal axis of the boom. This expands the scope of use of the crane, the area of its service area and the size of the boom space.
Application of counterweights
The use of additional removable counterweights with a total weight of 6.0 tons during operation makes it possible to significantly increase the load characteristics of the crane at medium and long ranges. And, this provides the best performance among similar cranes of this size group. Installation of jib and additional counterweights into the working position is carried out without the use of additional lifting equipment and human resources.
Truck crane KS-65713-1: ensuring reliability and safe operation
Planetary type gearboxes for lifting and slewing cranes with disc brakes. This solution meets modern requirements for lifting machines. Many crane components use imported components that do not require replacement or repair over the entire service life of the crane. An autonomous diesel heater is used to heat the crane operator's cabin.
Safe operation of the crane is ensured by a complex of instruments and devices, including a microprocessor load limiter with digital indication of operating parameters on the display in the driver’s cabin. The device automatically protects the crane from overload and tipping. Equipped with a crane coordinate protection system. This system is necessary for working in cramped conditions. It has a built-in telemetric memory unit (“black box”) and a crane protection module from dangerous voltage (MZON) for working near power lines.
Additional characteristics of the truck crane
The KS truck crane with a lifting capacity of 30 tons has the following additional characteristics and capabilities:
View all 50 meter cranes
Also, we work in: Balashikha, Voskresensk, Dolgoprudny, Domodedovo, Zhukovsky, Zaraysk, Istra, Klin, Lyubertsy, Mytishchi, Naro-Fominsk, Noginsk, Odintsovo, Pavlovsky Posad, Ramenskoye, Sergiev Posad, Serpukhov, Voskresensk, Khimki, Khotkovo, Shchelkovo, Elektrogorsk
Specifications
| Maximum load moment, t m | 160 | |
| Maximum load capacity, t/reach, m | 50 / 3,2 | |
| Boom length, m | 11,5 — 34,1 | |
| Jib length, m | 9,1; 15,1 | |
| Maximum hook lifting height, m | with main boom 34.1 m | 34,0 |
| with main boom 34.1 and jib 15.1 m | 50,0 | |
| Max. depth of lowering the hook with the boom 11.5 m at a reach of 5.0 m, m | 10,0 | |
| Load mass at which boom sections are allowed to extend, t | 5,0 | |
| Load lifting and lowering speed, m/min | nominal (with a load weighing up to 50.0 t) | 3,6 |
| increased (with a load weighing up to 10.0 tons) | 7,2 | |
| maximum (pulley multiplicity 1) | 40,0 | |
| Load landing speed, m/min | 0,1 | |
| Turntable rotation speed, rpm | from 0.2 to 1.2 | |
| Travel speed of the crane under its own power, km/h | up to 60 | |
| Size of the support contour along × across the chassis axis, m | with outriggers fully extended | 7,0 × 7,0 |
| with outrigger sections retracted | 6,53 × 4,63 | |
| Crane weight in transport position, t | with main boom, without counterweights | 37,0 |
| with main boom, with counterweights 2 t + 2 t | 41,0 | |
| with main boom, jib and one counterweight | 40,5 | |
| Wheel formula of the base car | 8×4 | |
| Base car engine | Type | diesel |
| Model | KamAZ-740 | |
| Power, hp | 360 | |
| Dimensions of the crane in transport position, m | Length, m | 13,95 |
| Width, m | 2,5 | |
| Height, m | 3,98 | |
| Operating temperature, degrees. WITH | from −40 to +40 | |
Exclusive official distributor of KAMAZ
Automotive crane KS-65713-1
with a lifting capacity of 50 tons on the KAMAZ-65201 chassis is designed to perform loading and unloading, construction and installation work at dispersed sites. The crane installation is driven using axial piston hydraulic pumps. The crane mechanisms have an individual drive with independent control from hydraulic motors and hydraulic cylinders. The hydraulic system of the crane installation ensures smooth control of all mechanisms with a wide range of speed control for working operations. It is possible to simultaneously combine up to three work operations. The metal structures of the boom are completely manufactured using high-strength imported WELDOX steel; critical components of the crane installation and support frame are also made using high-strength steels. The length of the boom in the retracted position of 11.5 m provides the crane with compactness and maneuverability when moving. In the fully extended state of all four sections, the length of the boom is 34.1 m, which ensures a wide working area and the highest height of cargo movement during operation. The ability to telescope a boom with a load on a hook allows the crane to perform special tasks: installing loads in hard-to-reach places, carrying them among mounted structures. For the convenience of working in cramped conditions, a mode for working with loads is provided with the installation of the crane on supports with the outrigger beams retracted. The maximum size of the support contour (7 x 7) is achieved through the use of an outrigger design with folding support beams. Thanks to this solution, the crane is able to carry out work with loads in a 360-degree circular zone and, as a result, the number of rearrangements when working on site is minimized. Additional equipment of the boom with a telescopic jib with a total length of 15.1 m (9.1 m is the stationary part, and a telescopic part with a length of 6.0 m) with the possibility of installation at an angle of 0 and 30 degrees relative to the longitudinal axis of the boom expands the scope of use of the crane, the area of its service area and the size of the sub-boom space. The use of additional removable counterweights with a total weight of 6.0 tons during operation makes it possible to significantly increase the load characteristics of the crane at medium and long ranges, which provides the best performance among similar cranes of this size group. Installation of jib and additional counterweights into the working position is carried out without the use of additional lifting equipment and human resources. Safe operation of the crane is ensured by a complex of instruments and devices, including a microprocessor load limiter with digital indication of operating parameters on the display in the driver’s cabin. The device automatically protects the crane from overload and capsizing, is equipped with a crane coordinate protection system necessary for working in cramped conditions, has a built-in telemetric memory unit (“black box”) and a crane protection module from dangerous voltage (MZON) for working near power lines.
SPECIFICATIONS
- MODEL
Basic chassis KAMAZ-65201 8x4 Travel speed, km/h up to 50 Operating temperature, °C from -40 to +40 - WEIGHT PARAMETERS AND LOADS
Crane weight in transport position, kg with main boom, without counterweights 36500 with main boom, jib and one counterweight 40100 with main boom, with counterweights 2t + 2t 40500 - OVERALL DIMENSIONS, MM
Length, mm 13900 Width, mm 2500 Height, mm 3980 - CRANE INSTALLATION
Boom radius, m 3,2-32 Maximum load capacity, t/reach, m 50/3,2 Jib length, m 9.1 or 15.1 Boom length, m 11,5-34,1 Number of sections, pcs. 3 retractable (total number 4) Maximum hook lifting height, m with main boom 34,5 with main boom and jib 15.1 m. 50,4 Maximum hook lowering depth, m boom 11.5 m, reach 5 m up to 8 Maximum load moment, t m 160 Mass of cargo at which telescoping of the boom is allowed, t 6,0 Support contour size: along x across the chassis axis, mm with retracted outrigger beams 6730 x 4630 with outrigger beams extended 7200 x 7000 Load lifting and lowering speed, m/min maximum (pulley multiplicity 1) 38 nominal (with a load weighing up to 50 tons) 3,6 increased (with a load weighing up to 10.0 tons) 7,2 Load landing speed, m/min no more than 0.15 Turntable rotation speed, rpm 0,1-1,2
All information presented on the site regarding technical characteristics, stock availability, cost of goods is for informational purposes only and under no circumstances constitutes a public offer.
Certificates
Certificate of conformity
Certificate of Conformity No. ROSS RU.МР09.В00054
Issued by LLC ISTS "TESTEXPERT"
Valid from 12/27/2007 to 12/26/2010
Permission for release and use
Permission for release and use No. РРС 01-00338
Issued by the Federal Service for Environmental, Technological and Nuclear Supervision of Russia
Date of issue: 02/21/2008
Vehicle type approval
Vehicle type approval No. ROSS RU.MP03.E01080
Issued by the Association for the Safety of Machinery and Equipment "TEST-SDM"
Valid until March 24, 2009
