KAMAZ 5320 frame number where to find. Where is the frame number in the Urals 4320

Note that until 1985, the marking of Ural vehicles was carried out in accordance with OH 025 281-66. Further until 1889 according to OST 37.001.269-83. According to OST 37.001.269-87, it was produced until 1992. Since 1996 in accordance with OST 37.001.269-96. And since 2002, marking has been determined in accordance with GOST R 51980 - 2002.

Marking locations for serial production vehicles are shown in Fig. 1

Marking of Ural cars

Note that until 1985, the marking of Ural vehicles was carried out in accordance with OH 025 281-66.
Further until 1889 according to OST 37.001.269-83. According to OST 37.001.269-87, it was produced until 1992. Since 1996 in accordance with OST 37.001.269-96. And already since 2002, marking was determined in accordance with GOST R 51980 - 2002. Marking locations for serial production vehicles are shown in Fig. 1

Marking of URAL-4320 cars

(models 4320, 43202, 43203, 43204, 43206, 4420, 44202, 5557, 55571, 3255, 32551, 32552)

The nameplate, which was attached to the right panel of the cab, in the place where the threshold of the right doorway is located (Fig. 2a, b), has the following data:

1. Name and trademark of the manufacturer
2. Product model
3. Identification number (code) V1N
4. Engine model

On the factory table, the markings are made using impact, using the 5-PrZ font, GOST 26.008-85. The trademark and names of the manufacturer are applied photographically.

Marking of URAL-375 cars

On URAL-375 vehicles, the nameplate is located on the passenger seat base on the right side. And carries the following data:

1. Trademark
2. Product model
3. The serial number of the car, which coincides with the chassis number
4. Engine serial number
5. Year of issue

On the nameplate, the vehicle is marked using a one-line marking, without spaces, limiting or separating characters. It contains the identification number (code) VIN, which consists of the international manufacturer identification code WM1, including 3 characters, the descriptive part VDS of 6 characters, and the index part VIS of 8 characters.

Engine Yamz-536 Euro-4

The Yaroslavl Motor Plant has implemented a number of large projects for the production of medium-sized in-line four- and six-cylinder diesel engines of the YaMZ-530 family with power from 120 to 320 hp.

Euro-4 standards with the potential to ensure Euro-5 and Euro-6. To implement the project for the production of new engines of the YaMZ-530 family, a new diesel plant was built. The YaMZ-530 production site, created with the support of the world's leading engineering firms and equipment suppliers, ensures the world-class technological level of product quality.

YaMZ-530 engines were developed by engineering and design with the support of AVL List (Austria), taking into account many years of successful experience in using YaMZ engines on various equipment in difficult operating conditions. YaMZ-530 engines use advanced design solutions for layout, control, and operation of the main systems, ensuring their reliability and efficiency.

YaMZ-530 engines have advantages over most foreign and domestic analogues in such indicators as power and torque with lower fuel consumption.

The YaMZ-536 engine is installed on Ural off-road vehicles 4x4, 6x6. Engines of the YaMZ-530 family in terms of emissions of harmful substances comply with the Special Technical Regulations “On the requirements for emissions of harmful (pollutant) substances from automotive equipment put into circulation on the territory of the Russian Federation”, paragraph 8c, - environmental class 4: • for road equipment - EEC Rules UN No. 49-04B1, No. 24-03; No. 49-05С (level B1 with OBD), No. 24-03 - EURO-4 • for off-road vehicles - UNECE Regulations No. 96-02, No. 24-03

Example of chassis number markings

5 5 5 7 0 0 2 1 2 3 4 5 6 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1-6 – model index

7 – symbol of the year of manufacture of the chassis

8-14 – chassis production number, which matches characters 8-14 of the vehicle’s V1N number, if the plant produced the vehicle

Chassis number markings on the frame side members were not introduced until 1983.

The chassis is marked by stamping on the right side member of the frame in an area that is 1000-1250 mm back in the direction of travel from the axis of the balancing bogie, at a distance of 200-300 mm back from the axis of the rear axle for two-axle vehicles, and 40-60 mm down from upper plane of the spar. In all cases, the 8-PrZ font is used.

Where is the Kamaz Frame Number – Driver Tips and Reviews

Frame number on KamAZ photo

You are interested in: Frame number on KamAZ photo. (Photos on this topic are collected here, but relevance is not guaranteed.) If you find that any photo violates copyright or is inappropriate, please notify us ().

forum Truckers Trucking u2022 View topic - ZIL, where is the number. source

Lunokhodov.Net :: View topic - From 8 to 10 tons. Extension. source

forum Truckers Trucking u2022 View topic - ZIL, where is the number. source

Lunokhodov.Net :: View topic - From 8 to 10 tons. Extension. source

We are installing the manipulator on Dyna, questions about strengthening the frame. source

Distinctive features of Euro-4 source

Catalog of technical information on URAL trucks and. source

Checking numbers before purchasing a KAMAZ

When purchasing commercial vehicles and registering them, the question often arises: where is…

VIN codes - where to look for them on different models of special equipment?

Extension of the KAMAZ-5320 frame, overhaul of the KAMAZ cab in Syktyvkar. source

Frame 53212-2800010 | Auto parts for KamAZ 53212 | Auto catalog. source

Forum "KAMAZ, MAZ, ZIL, GAZ (except Gazelle), Ural, KrAZ" source

Frame 5320-2800010 | Auto parts for KamAZ 5320 | Auto catalog. source

Truck service center – Auto showroom ARZ source

Kamaz frame - dump truck, 6522,5511,55111,65115,6520,65111 | Frame on. source

Kamaz 53212 frame with title - Special equipment for spare parts in Yurga source

Flatbed Kamaz - frame 53212, 4308, 5320, 65117, 4310, 43114 | Frame. source

Frame with documents for KamAZ 55111 buy in Moscow on Avito source

Vin number of the KamAZ 5460 frame is yd. source

We are installing the manipulator on Dyna, questions about strengthening the frame. source

Flatbed Kamaz - frame 53212, 4308, 5320, 65117, 4310, 43114 | Frame. source

KamAZ engines: 740, Euro-1, Euro-2, Euro-3, Euro-4. Price from. source

Example of cabin markings

4 3 2 0 0 0 2 0 0 0 5 4 3 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1-6 – similar to the VDS component of the VIN number. This set of numbers depends only on the type of cabin that is installed.

7 – symbol of the year in which the cabin was produced. It should be noted that the year of manufacture of the vehicle may differ from the year in which the cab was produced.

8-14 – cabin serial number

The production number of the cabin also does not correspond to the serial number of the chassis.

The marking of the vehicle's cabin is located in the right panel of the side of the cabin in its lower part, between the front holes with a center-to-center distance of 170 mm, and is stamped using the 8-PrZ font. Very often the number can be covered with a seal; to see it you need to bend the seal. This is typical for all cabs in the 4320 family. The marking structure is similar to the VDS and VIS VIN numbers. Until 2002, markings were made with a number break in two lines. The first contains 10 digits, the second contains 4. Since 2002, it has been executed in one line and without restriction characters.

Marking of URAL-4320 cars

(models 4320, 43202, 43203, 43204, 43206, 4420, 44202, 5557, 55571, 3255, 32551, 32552)

The nameplate, which was attached to the right panel of the cab, in the place where the threshold of the right doorway is located (Fig. 2a, b), has the following data:

1. Name and trademark of the manufacturer
2. Product model
3. Identification number (code) V1N
4. Engine model

On the factory table, the markings are made using impact, using the 5-PrZ font, GOST 26.008-85. The trademark and names of the manufacturer are applied photographically.

Marking of URAL-375 cars

On URAL-375 vehicles, the nameplate is located on the passenger seat base on the right side. And carries the following data:

1. Trademark
2. Product model
3. The serial number of the car, which coincides with the chassis number
4. Engine serial number
5. Year of issue

On the nameplate, the vehicle is marked using a one-line marking, without spaces, limiting or separating characters. It contains the identification number (code) VIN, which consists of the international manufacturer identification code WM1, including 3 characters, the descriptive part VDS of 6 characters, and the index part VIS of 8 characters.

Example of chassis number markings

5 5 5 7 0 0 2 1 2 3 4 5 6 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1-6 – model index

7 – symbol of the year of manufacture of the chassis

8-14 – chassis production number, which matches characters 8-14 of the vehicle’s V1N number, if the plant produced the vehicle

Chassis number markings on the frame side members were not introduced until 1983.

The chassis is marked by stamping on the right side member of the frame in an area that is 1000-1250 mm back in the direction of travel from the axis of the balancing bogie, at a distance of 200-300 mm back from the axis of the rear axle for two-axle vehicles, and 40-60 mm down from upper plane of the spar. In all cases, the 8-PrZ font is used.

Not available:

Can't find the required part from the Ural-4320 car frame group to URAL-4320 ? Consult our specialists by phone 8-800-700-19-88 or by email. We will definitely help you!

Example of cabin markings

4 3 2 0 0 0 2 0 0 0 5 4 3 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14

1-6 – similar to the VDS component of the VIN number. This set of numbers depends only on the type of cabin that is installed.

7 – symbol of the year in which the cabin was produced. It should be noted that the year of manufacture of the vehicle may differ from the year in which the cab was produced.

8-14 – cabin serial number

The production number of the cabin also does not correspond to the serial number of the chassis.

The marking of the vehicle's cabin is located in the right panel of the side of the cabin in its lower part, between the front holes with a center-to-center distance of 170 mm, and is stamped using the 8-PrZ font. Very often the number can be covered with a seal; to see it you need to bend the seal. This is typical for all cabs in the 4320 family. The marking structure is similar to the VDS and VIS VIN numbers. Until 2002, markings were made with a number break in two lines. The first contains 10 digits, the second contains 4. Since 2002, it has been executed in one line and without restriction characters.

The cabin number is marked on all cabins, even those supplied as spare parts.

Until 1983, only the production numbers of the cab and the vehicle itself could be found on the plate in the cab.

After 2003, laser markings began to be added to this. The laser beam to the left of the nameplate began to show the cabin number. In appearance, the marking looks like a sequence of microholes, the depth of which is 0.4-0.5 mm.

Exterior design

The tail of the Ural truck includes:

• a hood that can open at right angles.
• bent wings;
• footrests;
• sidewalls;
• removable mudguards;
• radiator lining.

The hood is fixed to the frame by means of lever mechanisms with balancing springs. This solution allows you to reliably hold the hood lid in the open position. The oval-shaped mounting holes make it possible to adjust the position of the hood in relation to the cabin and/or tail of the vehicle. If necessary, the Ural hood is rigidly fixed in the open position by means of a safety hook, which is standardly located in the left lever mechanism.

About the marking of URAL cars

We hereby inform you that, until 07/01/1985, the marking of URAL vehicles was carried out in accordance with OH 025 281-66, starting from 07/01/1985 to 01/01/1989 according to OST 37.001.269-83, from 01/01/89 to 01.08.1996 in accordance with OST 37.001.269-87, from 01.08.1996 in accordance with OST 37.001.269-96. Currently, production is being prepared for marking in accordance with GOST R 51980 - 2002.

The marking locations for commercially produced vehicles are shown in Fig. 1.

Marking of vehicles of the URAL-375, URAL-4320 families

(models 4320, 43202, 43203, 43204, 43206, 4420, 44202, 5557, 55571, 3255, 32551, 32552)

The nameplate, fixed with rivets on the right side panel of the cab (in the threshold area of ​​the right doorway) (see Fig. 2, a, and Fig. 3) contains the following data:

1. Trademark of the manufacturer and its name.

2. Product model - for example, 5557-0010-10.

3. Identification number (code) V1N.

4. Engine model.

All markings on the nameplate are made with impact, the marking font is 5-PrZ, GOST 26.008-85. The trademark and the name of the manufacturer are applied photographically.

On vehicles of the URAL-375 family, the nameplate was installed on the passenger seat base on the right side. The plate marked:

1. Trademark of the manufacturer.

2. Product model - for example, 5557-0010-10.

3. Production (serial) number of the vehicle, matching the chassis number.

4. Engine serial number.

The vehicle marking (identification number (code) VIN, consisting of the international manufacturer identification code WM1 (3 characters), the descriptive part VDS (6 characters), and the index part VIS (8 characters)) is stamped on one line without spaces, separating and limiting symbols on the nameplate (the role of limiting symbols is performed by the boundaries of the marking field).

Characters 1 through 3 inclusive represent the International Manufacturer's Index (WMI).

Characters from 4 to 9 inclusive (VDS, numbers only) represent an abbreviated designation (index) of the model (in this example, URAL-5557-0010-10).

Character 10 (a number or letter of the Latin alphabet) is a symbol for the year of manufacture of the chassis (in this example, 2002) in accordance with Appendix A OST 37.001.269-96.

Characters 11 to 17 inclusive (numbers only) represent the production number of the vehicle (chassis).

Characters 10 to 17 inclusive make up the VIS of the vehicle's VIN code.

The chassis, as an integral part of the vehicle, is marked with a stamp on the right side member of the frame in an area located 1000..1250 mm back in the direction of vehicle movement from the axis of the balancing bogie (for two-axle vehicles - at a distance of 200..300 mm back from the axis of the rear axle ) and 40..60 mm down from the upper plane of the spar. Marking font 8-PrZ according to GOST 26.008-85.

Messages [1 to 20 of 23]

1↑ Topic from patriot 03-10-2013 20:35:21

Topic: how to distinguish engine model

Good day and time

Edited by patriot (03-10-2013 20:43:50)

2↑ Reply from shaman507 03-10-2013 21:53:37

Re: how to distinguish engine model

More specifically, what differences are you interested in?

3↑ Reply from patriot 03-10-2013 22:07:50

Re: how to distinguish engine model

in general everything for example how to find out what engine my Ural has

4↑ Reply from PATRIOT 04-10-2013 00:15:04

Re: how to distinguish engine model

Well, if you have a 12 Volt generator, the oil filter is black plastic, and the breather in the front cover is located at the top left, or bottom right - then this is IMZ 8.103.10 the most favorite model of the Urals

5↑ Reply from shaman507 04-10-2013 07:29:36

Re: how to distinguish engine model

in general everything for example how to find out what engine my Ural has

Show me a photo. And there is not much difference, they are all the same inside.

6↑ Reply from mexanik62 04-10-2013 09:01:33

Re: how to distinguish engine model

) — Location of carburetor studs (vertical, horizontal) — Valve sizes These are, in my opinion, the main differences. Complete sets can be combined.