Instrument panel and controls MAZ 5340M4, 5550M4, 6312M4 (Mercedes, Euro-6).


Instrument panel and controls MAZ 5340M4, 5550M4, 6312M4 (Mercedes, Euro-6).

Instrument panel and controls MAZ 5340M4, 5550M4, 6312M4 (Mercedes, Euro-6).

Instrument panel - overview.
1 – Instrument panel.

2 – 24/12 V voltage converter switch.

3 – Microclimate control unit.

4 – Hazard switch.

5 – Main light switch.

6 – Remote battery switch.

7 – Regeneration switch.

8 – Cruise control switch.

9 – Front/rear fog lamp switch.

10 – Heated mirror switch.

11 – Hitch light switch.

12 – Cross-axle differential lock switch.

13 – 12 V socket.

14 – ABS operating mode switch.

15 – ASR operating mode switch.

16 – Platform lift control switch.

17 – HBO temperature switch.

Switch handle for direction indicators, low and high beam.

Switch positions.

Horizontal plane.

  • (fixed) – neutral.
  • I (fixed) – right direction indicators are on. The indicators are turned off automatically.
  • II (fixed) – left direction indicators are on. The indicators are turned off automatically.

Vertical plane.

  • III (not fixed) pull towards yourself – short-term switching on of the high beam.
  • IV (fixed) press away from you – high beam is on.
  • (fixed) – low beam is on when the headlights are on with the main switch 1.

Windshield wiper switch handle with windshield washer.

Switch positions.

Horizontal plane.

  • (fixed) – neutral.
  • I (fixed) – the windshield wiper is switched on at low speed.
  • II (fixed) – the windshield wiper is switched on at high speed.
  • III (fixed) – the windshield wiper is switched on in intermittent mode.

Vertical plane.

  • IV (not fixed) pull towards you – the windshield washer is turned on while simultaneously turning on the windshield wiper at low speed.

Sound signal.

The sound signal is electric.

On/off.

  • Press/release the end (position V ) of the handle for the direction indicator switch, low and high beam at any position of the handle.

The sound signal is pneumatic.

On/off.

  • Press/release the end (position V ) of the windshield wiper/washer switch handle in any position of the handle.

Emergency light signaling.

  • Press the hazard warning switch 1.
  • The red hazard warning lamp 1, indicator lamps 2 and 3 on the instrument panel and the turn signal lamps flash at intervals.
  • Press the hazard warning switch 1.
  • The red indicator of the hazard warning switch 1 , control indicators 2 and 3 and the turn signal lamps will go out.

If any turn signal lamp on the right or left side of a tractor or trailer (semi-trailer) is faulty, the turn signal indicator on the corresponding side of the tractor or trailer (semi-trailer) does not turn on.

Parking lights.

  • Set the lower key of switch 1 to the middle position. The side lights and control indicator 2 on the instrument panel light up.
  • Set the upper key of switch 1 to the upper position. The side lights and indicator will go out.

Low and high beam.

Turning on the low beam.

  • Set the lower key of switch 1 to the lower position. Control indicator 3 on the instrument panel speedometer lights up. Switch handle 4 is in the initial position O.

Turning on the high beams.

  • Turn on low beam.
  • Short-term activation ( III 4 towards you in a vertical plane .
  • Long-term activation ( IV 4 away from you, in a vertical plane .
  • Control indicator 2 on the instrument panel speedometer lights up in short-term and long-term modes.
  • High beam – set switch handle 4 to position O.
  • Low beam – set the upper button of switch 1 to the upper position.

Headlight angle corrector.

Regulation.

  • Increasing the angle - rotate the regulator in direction II .
  • To decrease the angle, turn the regulator in direction I.
  • – unloaded state, basic position.
  • 13 - loaded car.

When loading a car with springs, the low beam light and shadow limit rises. Therefore, you should rotate the regulator from the downward position until the low beam of the car stops blinding drivers in the oncoming lane.

Not available:

Part codeNamePart Information
1318-27TachometerQuantity per 53363 2) 53366 3) 6303 1Not available
53366-3805010DashboardQuantity per 53363 2) 53366 3) 6303 1 Model 53366 Group Instruments Subgroup Instrument panel Serial part number 010Not available
6303-3805010DashboardQuantity per 53363 2) 53366 3) 6303 1 Model 6303 Group Instruments Subgroup Instrument panel Serial part number 010Not available
53362-3805010DashboardQuantity per 53363 2) 53366 3) 6303 1 Model 53362 Group Devices Subgroup Instrument panel Serial number of part 010Not available
SP152-3802010-TSpeedometerQuantity per 53363 2) 53366 3) 6303 1 Model SP152 Group Instruments Subgroup Speedometer Serial part number 010 Additionally Interchangeable with a part previously released under the same numberNot available
28-3801010Instrument clusterQuantity per 53363 2) 53366 3) 6303 1 Model 28 Group Devices Subgroup Instrument panel (combination) Part serial number 010Not available
2212-3803010-07Turn signal indicator lampQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Part serial number 010Not available
2212-3803010-08Indicator lamp for turning on the trailer turn signalQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Part serial number 010Not available
2212-3803010-28Indicator lamp for turning on high beam headlightsQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
2212-3803010-11Control lampQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
2212-3803010-17Control lamp for turning on the electric torch heaterQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
2212-3803010-35Control lamp for switching on the gearbox dividerQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
2212-3803010-13Indicator lamp for turning on the cross-axle differential lockQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
7712-00-00-000-04Indicator lamp for turning on the cross-axle differential lockQuantity per 53363 2) 53366 3) 6303 1Not available
2212-3803010-14Indicator lamp for turning on the center differential lockQuantity per 53363 2) 53366 3) 6303 1 Model 2212 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
7712-00-00-000-05Indicator lamp for turning on the center differential lockQuantity per 53363 2) 53366 3) 6303 1Not available
2202-3803010-41StubQuantity per 53363 2) 53366 3) 6303 3 Model 2202 Group Instruments Subgroup Control lamps (Indicator lamps) Serial part number 010 Additionally Not interchangeable with a part previously released under the same numberNot available
64221-3710016StubQuantity per 53363 2) 53366 3) 6303 4 Model 64221 Group Electrical equipment Subgroup Electrical switches (foot switch) Part serial number 016Not available
0975-00-00-000-08Cross differential lock switchQuantity per 53363 2) 53366 3) 6303 1Not available
3812-3710000-02-28Cross differential lock switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812 Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
3812-3710000-02-09Unified switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812 Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
0975—00-00-009-09Center differential lock switchQuantity per 53363 2) 53366 3) 6303 1Not available
3812—3710000-02-38Center differential lock switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812. Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
3012-3803010Warning lamp blockQuantity per 53363 2) 53366 3) 6303 1 Model 3012 Group Instruments Subgroup Indicator lamps (Indicator lamps) Part serial number 010Not available
3812-3710000-10-03Fog light switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812 Group Electrical equipment Subgroup Electrical switches (foot light switch) Serial part number 000 Additionally Not interchangeable with a part previously released under the same numberNot available
0975-00-00-001-01Rear fog lamp switchQuantity per 53363 2) 53366 3) 6303 1Not available
3812—3710000-02-04Rear fog lamp switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812. Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
0975-00-00-000-05Refrigerator switchQuantity per 53363 2) 53366 3) 6303 1Not available
3812-3710000-02-17Refrigerator switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812 Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
3812-3710000-02-38Road train sign light switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812 Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
3812-3710000-02-23Heated mirror switchQuantity per 53363 2) 53366 3) 6303 1 Model 3812 Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
64221-3724012-01Left switch harnessQuantity per 53363 2) 53366 3) 6303 1 Model 64221 Group Electrical equipment Subgroup Electrical wires Part number 012Not available
64221-3724014-01Right switch harnessQuantity per 53363 2) 53366 3) 6303 1 Model 64221 Group Electrical equipment Subgroup Electrical wires Part number 014Not available
11-3704Push-button switchQuantity per 53363 2) 53366 3) 6303 2Not available
P147-3709000-09-01Heater switchQuantity per 53363 2) 53366 3) 6303 1 Model P147 Group Electrical equipment Subgroup Electrical switches (central light switch) Part serial number 000Not available
587-3710000-01Central light switchQuantity per 53363 2) 53366 3) 6303 1 Model 587 Group Electrical equipment Subgroup Electrical switches (foot switch) Part number 000Not available
VK416B-3709000-01Instrument panel lighting switch with rheostatQuantity per 53363 2) 53366 3) 6303 1 Model VK416B Group Electrical equipment Subgroup Electrical switches (central light switch) Part serial number 000Not available
374373Nut M10x1-6NQuantity per 53363 2) 53366 3) 6303 1 Coated uncoatedNot available
5428-3710021Switch handleQuantity per 53363 2) 53366 3) 6303 1 Model 5428 Group Electrical equipment Subgroup Electrical switches (foot switch) Part serial number 021Not available
UK168-380010Pressure indicator receiverQuantity per 53363 2) 53366 3) 6303 1 Coated uncoatedNot available
2312-3803010-03Warning lamp blockQuantity per 53363 2) 53366 3) 6303 1 Model 2312 Group Instruments Subgroup Control lamps (Indicator lamps) Part serial number 010Not available
A24-2LampQuantity per 53363 2) 53366 3) 6303 7Not available
LV211-3714329Cartridge with plugQuantity per 53363 2) 53366 3) 6303 7 Model LV211 Group Electrical equipment Subgroup Internal lighting lamps Serial part number 329Not available
64221-3831010Additional instrument panel assemblyQuantity per 53363 2) 53366 3) 6303 1 Model 64221 Group Devices Subgroup 3831 Part serial number 010Not available

Explanation of the right side of the shield

To the right are indicator lamps on the MAZ panel, reflecting:

  • Pressure drop in brake circuits;
  • Battery charge level;
  • Reduced oil pressure in the engine;
  • Insufficient coolant level;
  • Turning on the cross-axle differential lock;
  • Oil filter contamination;
  • Conditions of ABS on the trailer;
  • Functioning of EDC;
  • Starting glow plugs;
  • The oil level reaches the emergency mark;
  • Diagnostic mode of PBS and ABS;
  • ABS control;
  • Air filter contamination;
  • Fluid level in the power steering system;
  • Emergency temperature increase in the cooling motor system.

Decoding the MAZ Zubrenok dashboard lamps also includes the values ​​displayed on the right side of the panel. Here are the switches for the fan in the cabin, light, differential lock and engine illumination.

On the same part there are switches for the rear fog lamp, heated mirrors, ABS, TEMPOSET, and PBS operating modes.

Below there is a rheostat for the instrument lighting, a key for turning on the alarm, a battery switch and a thermostat that controls the heater (if such a unit is installed).

MAZ warning lamps, as well as instrument panels, are easy to find in the catalog. We guarantee fast delivery, affordable prices and the best quality spare parts.

Source

Manual MAZ 203 203065-0000020 RE (2016) - page 6

2.2.4

MAZ-203. LCD display symbols and indicator lamps

Information, warning or emergency symbols are displayed on the display (Table 2.1). In this case, if the emergency symbol is displayed, then the “STOP” 2 indicator (Fig. 2.4) lights up at the same time (on the instrument panels manufactured by Eurozhgut-M LLC there is a red emergency symbol) and the buzzer sounds (further movement is prohibited until the cause of the malfunction is eliminated). If a warning symbol is displayed, then at the same time the “Attention” indicator 3 lights up (on the instrument panels manufactured by Eurozhgut-M LLC there is an orange warning symbol) (driving is permitted, but the cause of the indicator light must be eliminated as soon as possible). The symbols are displayed in additional display area 8 in random order.

Below is a description of a bus with an instrument panel manufactured by Agat-Electromechanical Plant OJSC.

The purpose of the indicator lamps and symbols on the LCD display is given in Table 2.1.

Table 2.1 - LCD display symbols and indicator lamps

1 2 3 4 5 6 7
29 emergency pressure

air in the front brake circuit

Lights up when the air pressure in the front brake circuit is below 0.55 MPa (5.5 kgf/cm2) + +
30 emergency pressure

air in the rear brake circuit

Lights up when the air pressure in the rear brake circuit is below 0.55 MPa (5.5 kgf/cm2) + +
31 emergency pressure in air suspension Lights up if the air pressure in the suspension receiver is below 0.55 MPa (5.5 kgf/cm2) + +
32 stopping requirements Lights up when you press the button of the same name in the passenger compartment.

fat salon

+ +
33 emergency door condition Lights up when the air pressure in the door pneumatic drive drops below the permissible level + +
34 emergency door opening Lights up when one of the emergency door opening taps is turned + +
35 ladder supply requirements Lights up when the drain button is pressed from outside

or inside the bus, the buzzer sounds at the same time

– continuous signal

+ +
36 requirements for stopping by a disabled person Lights up when the “stop request” button is pressed

disabled", at the same time the buzzer sounds - a continuous signal

+ +
37 middle door lock Lights up if the handicapped ramp is folded out and the middle door is blocked from closing. + +
38 system malfunction

SCR (exhaust emissions reduction)

Flashes when the preset toxicity level is exceeded

exhaust gases (see paragraph 4.1.6). If the lamp comes on, contact a specialized service station.

+
39 AdBlue level below reserve Lights up when the liquid level drops below

reserve (10% of tank capacity, about 2 l). Goes off after filling AdBlue (20% of tank capacity, more than 4 l).

+
40 outside air intake

life of the bus

Lights up when the front window flap is turned on.

Pipe for air intake from outside the bus

41 fan hydraulic drive is faulty Lights up when there is a malfunction in the fan hydraulic drive control system, and the fan rotates at maximum speed +
42 tilt system operation Lights up when the tilt system is turned on +
43 body position is different from normal Lights up when the position of the bus body deviates from normal +
44 the bus body rises Lights up when the bus body is raised +
45 the bus body is lowered Lights up when the bus body is lowered +
46 ELS5 system malfunction Lights up when there is a non-critical malfunction of the electronic suspension control system. Driving to the repair site is allowed +
47 Lights up when there is a critical malfunction of the electronic suspension control system. No movement allowed + +

Cabin and body

The modern driver's workplace is equipped with everything necessary. In general, the cabin is equipped with such elements as splash protection, an independent air-type stove, a radio and air conditioning. Among the special amenities in the cabin, we note the presence of comfortable seats, which are also heated. The seats are adjusted, as usual, in three modes: height, reach and backrest angle. Already the basic configuration of the MAZ-6312 has a seat shock absorption system.

Despite the large dimensions of the vehicle, driving and maneuvering it is reduced to minimal labor costs. This may be partly due to the power steering, as well as other systems that make life easier for both the driver and the repairman. The spaciousness inside the cabin allows both the driver and passengers to feel comfortable inside. In addition to the spaciousness of the cabin itself, the sleeping places are quite large, of which, by the way, there are two.

The instrument panel is located so that the driver does not have to stretch. Functional buttons are located on the panel, which is located to the right of the driver, under the dashboard. The problem of many predecessors of this model – noise insulation – was also solved. In the MAZ-6312, it becomes immediately noticeable that the cabin is well insulated not only from noise, but is also protected from dust, moisture and the effects of thermal factors.

The following devices are also available in the truck:

  • Brake system with ABS;
  • ASR – traction control system;
  • Bead and axle load control system;
  • Cruise control;
  • Mirrors equipped with electric drive;
  • Digital tomograph and voltage converter.

The body can be of different types. Isometric platforms are used to transport products that are not suitable for high temperatures. It is also possible to transport containers of various types, thanks to the open platform. The body structure of channel and metal sheets is intended for the transportation of grain. The only complaint is the high loading height, which creates some inconvenience. We need to give credit to the designers. The appearance is minimalistic and dignified, which makes one mistake the Belarusian MAZ for a European truck.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]